Testing Equipment Dealers in Choolai, Chennai

Environmental Testing InstrumentsDual Input Thermometer & Infrared ThermometerThermo Hygrometer & Hygro AnemometerLUX Meter & RPM MeterElectrosmog MeterEnvironment Testing Instruments (Mini Series)Infrared Thermometers (Gun Type)

5e-ha60×50 hardgrove grindability index tester is designed to measuring the grindability of bitumite and anthracite , which is widely applied in coal industry, power plant ,metallurgy and chemical industry.

Rapid Testing Speed Results - 30 ~ 40 Secs Compact Design with Inbuilt Touch Screen High Resolution Gas Proportional Counter Technology Ideal for Jewellers, Old Gold Purchase, Bank, Jewel Loans

We are offering comparison testers. Gcl & gch series gcl & gch series gauge comparison testers (comparators) for low (gcl series) and high (gch series) pressure applications are available in • hand pump model -hp: hand pump with fine adjustment vernier • screw pump model -sp: hand pump with screw ram pump • screw pump model mounted on an elevated stand -spes

Environmental / Climatic test chamber used to test effects that climatic changes have on products placed within environmental chambers. These chambers evaluates product quality, identifies weaknesses, etc. High temperature, low temperature and humidity testing conditions can be done in single unit either manually / programmed with cyclic operation conditions. Temperature ranges: -10 to +100°C | -40 to +100°C | -70 to +100°C | -70°C to +150°C Humidity range: 40% to 98% @ 30°C to 80°C. Technical Specifications: Temperature, Humidity Controller (Humidity - Dry and Wet bulb method) Digital Microprocessor based, PID, Temperature Indicator cum controller with display resolution of 0.1°C. Digital Microprocessor based, PID, Humidity Indicator cum controller with display resolution of 1%Rh.     (direct reading). Display accuracy ±0.5%, full scale. Temperature controlling accuracy ±2°C. Humidity controlling accuracy of ± 2-3% @ 40% to 98% Rh. Class A grade PT-100 (RTD) Sensor for dry and wet temperature measurements. Construction: Vertical model. Inner Chamber made of dully polished Stainless Steel, 304 Grade. Outer made of Mild Steel, powder     coated. Polyurethane Foam (PUF) and Glass Wool / Ceramic blanket Insulation. Handle, lock and heavy-duty hinges for door. Door with Silicon / Neoprene rubber gasket for leak proof. Forced air circulation to maintain uniformity of temperature. Frost Free Viewing Window to observe the testing components during working condition. Double walled full front opening door. Inner lined with SS. Long life Ni-chrome, SS heaters with fins for higher temperature. Automatic cut off for circulating fan when the door is opened. Lockable Wheels for easy movement. Drain facility to drain the condensed water from the chamber. Adjustable SS meshed trays. Refrigeration System: Hermetically sealed EMERSON Copeland make compressor. CFC free refrigerant filled. Fin and tube type air-cooled condenser. Safety features: Provided with Suitable overload protectors and MCB s to ensure absolute safety to Electrical / Electronics and Refrigeration Systems. Provided with automatic water filling for humidity test. Door light is provided for viewing window. Single phase preventor will be provided for 3-phase instruments. High Pressure and Low Pressure safety cut off for Compressors. Fully solid-state relay (SSR) control for heaters. High and Low temperature deviation alarms. Standard sizes: 600 x 600 x 600 mm | 750 x 750 x 750 mm | 1000 x 1000 x 1000 mm Power Supply: Single-phase 230Volt / Three phase 440 Volt, 50 Hz. Optional: Calibration certificate traceability to NABL standards (Temperature controller with sensor). Tower Light with Red, Orange & Green indication to know the status of the machine. Specimen Protection to protect Components from high temperatures. Multi Programmable, cyclic Eurotherm PID controller with ramp and soak. IR lamps facility for component surface testing. Full Stainless steel (Inner & Outer). Computer Interface (RS232 / 485). Available in different chamber sizes, as per customers requirements. Note: Due to continuous development SRICO reserves all the rights to change specifications without prior notice.

The APT-1400F is a next-generation flying probe test system which has unprecedented performance in terms of test speed, positioning accuracy and test coverage. Owing to major improvement in test speed and positioning accuracy, the APT-1400F is capable of having the probes contact to extremely small test pads deployed on the latest SMT boards with a high degree of accuracy & to test it in a small amount of time.

Lightning Strike Counter, Earthing Electrodes, Earthing Installatio

Plastic Testing Equipment, Friction Tester

Melt Flow Index tester Sealing Systems - Lathe Cut & Ground Gaskets for Radiator application. Molded & Cutting Type gaskets.

Auto Rickshaw Electronic Meter, Taxi Meter, Auto Rickshaw Fare Mete

Electronic Meter, Common Meter Reading Instrument, Mesh Networking Equipmen

Data Scanner, Thermal Label Printer, High Speed Scanne

Data Logger, Transportation Dataloggers, Actoclavble MOP, Elpro Libero C

Battery Tester, Battery Accessorie

Pipette Accuracy Tester, Pipette Leak Tester, Micro Pipett

MMP Offers a range of Panel Mounted instruments, to complete its kitty of critical components for a RO system. These include TDS EC pH ORP monitors as well as controllers. These instruments are offered along with sensors and are highly accurate. They are sturdy and sleek in design with a large display screen.

Laboratory Testing Equipments, Scientific Instruments, Microscope

Dead Weight And Comparison Testers, Flow & Level Calibration Syste

Panel Instruments, Quick Splice Connector, Oil Pressure Switche

Testing Instrument, Measuring Instrument, Quality Testing Equipmen

Energy Meter, Water Meter, PH Meter, Flow Meter, Scientific Instrumen

Testing Equipment, Measuring Equipmen