Electronics Training Kit Dealers in Delhi

Brand Name:-SAMTEKLAB Electrical Machine TrainerThe Electrical Machine Trainer is designed to provide the students with agood and strong foundation in electrical machine technology. The trainerconsists of modules and panels containing meters, variable resistors,resistive load, capacitive load, inductive load, motors. Educational Objectives: DC Machines Trainer Set Prime Mover & Torque Measurement. DC Motor Construction, DC Generator Construction. DC Shunt Motor Characteristic (starting, running, under load), DC Series Motor Characteristic (starting, running, under load). DC Compound Motor Characteristic (starting, running, under load). DC Separately-Excited Shunt Generator Characteristic (running, under load). DC Self-Excited Shunt Single Phase AC Machines Trainer Set. Prime Mover & Torque Measurement Split-Phase Induction Motor Characteristic (starting, running, under load). Capacitor-Start and Run Motor Characteristic (starting, running, under load). Universal Motor Characteristic (starting, running, under load). Three Phase AC Machines Trainer Set • Prime Mover & Torque Measurement• Wound-Rotor Induction Motor Characteristic (starting, running, under load).• Squirrel-Cage Induction Motor Characteristic (starting, running, under load).• Synchronous Motor Characteristic (starting, running, under load).• Three-Phase Alternator, Alternator Under Load, Alternator Synchronization, Alternator Power• The Three-Phase Induction Motor Starters

High quality and high-cost performance.RC Combo Kit 30A ESC + Brushless Motor(BLDC)1 x 30A ESCSoldered Bullet connectors to motor and ESC for easy connection. MODEL NO : A2212 1000KV BRUSHLESS MOTOR + 30A ESC WEIGHT & DIMENSIONS : Motor size and weight : 27.5 x 27mm / 1.1 * 1.1in & 48g ESC Size & weight : 45 x 24 x 11mm / 1.8 * 0.9 * 0.4in & 25g Total item weight : 87g MATERIAL & COLOUR : NA & Multicolor TECHNICAL SPECIFICATIONS: Brushless Dc Motor: KV (rpm/volt): 1000 Thrust: 900/4 Efficiency : 80% efficiency current: 4-10A (>75%) Current capacity : 12A/60s Load current @10v: 0.5A Working voltage: 7-12V Brushless ESC: Output: Continuous 30A, burst 40A up to 10 Secs. Input voltage: 2-4 cells lithium battery or 5-12 cells NiCd/NIMh battery BEC: 2A / 5V (Linear mode). Max speed: 210,000rpm for 2 poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: Brushless Motor)

Electronics engineering, or electronic engineering, is an engineering discipline where non-linear and active electrical components such as electron tubes, and semiconductor devices, especially transistors, diodes and integrated circuits, are utilized to design electronic circuits, devices and systems, typically also including passive electrical components and based on printed circuit boards. The term denotes a broad engineering field that covers important subfields such as analog electronics, digital electronics, consumer electronics, embedded systems and power electronics. Electronics engineering deals with implementation of applications, principles and algorithms developed within many related fields, for example solid-state physics, radio engineering, telecommunications, control systems, signal processing, systems engineering, computer engineering, instrumentation engineering, electric power control, robotics, and many others.

we offer sine-square oscillator 1hz to 1mhz. specification frequency range : 1 hz to 1 mhz in six decade steps dial accuracy : ± 3% wave form : sine & square wave output voltage : (1) sine wave 0 - 10v in 3 decade steps of 10v , 1v & 0.1v with continuously variable control (2) square wave 0 - 15v pp continuously variable sine wave distortion : less than 0.5% from 100 hz to 100khz square wave rise time : less than 100 neno sec. at maximum output square wave symmetry : duty factor variable from 0% to 80% output impedance : 600 ohm ± 5% power : 230v ac ± 10 %

31 IN 1 DIY ARDUINO ELECTRONICS HOBBY KIT Each kit consists of :  1)  Arduino Uno R3 x 1 2) 400 Point BreadBoard x 1 3) Male 2 Female + Male 2 Male x 20 4) Assorted Resistors x 40 (100R,220R,1K,10K : 10 each) 5) Assorted Capacitor x 20 (22pF, 0.1uF, 10uF, 100uF : 5 each) 6) Red LED 5mm x 5  7) Green LED 5mm x 5 8) Yellow LED 5mm x 5 9) RGB LED 5mm x 2 10) IR Sensor Pair x 1 (Transmitter+Receiver) 11) BC547 + BC557  (5 each) 12) BD139 x 2 13) 1N4007 Diode x 5 14) 5V DC Motor x 1 15) Buzzer x 1 16) HCSR-04 x 1 (Ultrasonic Sensor) 17) 31 In 1 Jackly Screw Driver Set  x 1 18) LM35 x 1 (Temperature Sensor) 19) Push Button Micro Switch x 5 20) 7 Segment LED (CC/CA) x 2 21) DC 6V Relay x 1 22) 10k Pot x 2 23) 16 x 2LCD + Bergstrip x 1 24) LDR Sensor x 2 25) Siron Iron 25W x 1 26) Soldering Wire 50g x 1 27) Soldering Stand x 1 28) Soldering Paste x 1 29) De Soldering Wire x 1 30) Wire Stripper / Cutter x 1 31) Zero PCB 6×4 Inch x 2 Packing Box  x 1

K&A Laborgeraete, Germany has over 20 year experience in the field of Oligo Synthesis and Synthesizers. The product range includes DNA / RNA / Peptide synthesizers and Oligo purifiers.

The system is based on the world standard Allen-Bradley micrologix controller or equivalent. The system is designed to give the student a direct interface with PLC application. Some very frequently required applications are selected and necessary hardware is also supplied. The system consists of: A) Main experimental board with PLC mounted on it . (PART A) B) 6 no. of hardware applications along with accessories, cable and software with detailed instruction manual. (PART B) The micrologix PLC controller of Allen-Bradley make is mounted on an elegant box with anodized top, which includes 10 no. of input switches and 6 no. of isolated relay along with LED displays. PART A: Allen-Bradley PLC (with 10 inputs and 6 Digital outputs) mounted on the panel with 10 different combinations of switches (toggle switch, N/O and N/C push buttons) and outputs 6 no. LEDs with isolated relay output. The system has built in power supply and is provided with interfacing for communication. PART B: Represents the following applications with complete hardware power supplies, accessories and cables. (6 No. of hardware experiments. 1. SIMPLE RESISTANCE WELDING & 2. REPEAT RESISTANCE WELDING 3 SIMPLE (EVENT) COUNTER: 4 STAR DELTA STARTER: 5 PICK AND PLACE APPLICATION: 6 ANNUNCIATOR SYSTEM: For more details write to us.

This is an electronic cum UV Lead Detector made in U.S.A. This has a heated sensor. It is provided with rechargeable battery through a AC charger. The purpose of heating the sensor is to increase its sensitivity to detect very small leakage of up to 03 gms per year Features of Model- INV 2032BV It detects the leak, rate of leakage and actual leakage position. It can detect leakages as small as 03 gms per year It detects leakage of all type of AC gases like CFC, HFC, HCFC It has a three colour leak size indicator. It has six different level of electronic sensitivity to match different type of gasses having different quantity of leakages It has a ultra violate light sources attached to the tip of the tube so that whenever an electronic leak is indicated, it can be further verified by the UV light It is supplied with UV detecting safety glass. The tool has a key pad to control the sensitivity, sound and UV light. It is supplied in blow, molded plastic carry case with batteries

â€Â¢ To locate & indentify noise and enable road test diagnosis. â€Â¢ Super sensitive microphone pick up. â€Â¢ Defect & isolate noisy components. â€Â¢ Contents: Flexible non-consuctive shaft Cushioned headphones 4 channel sensor selector unit 4 pick up sensors-4.8mm ling cords 0000000000000000000000000000000000000 000000000000000000000000000000000000 0000000000000000000000000

Noise level monitoring gives a brief hands on concept of cascaded and three stage amplifiers in analog electronics and amplifying a very small signal with high gain transistors.. Cascaded three stage amplifier,Analog electronics,Gain in transistors

A single load cell is inserted in the connecting rod of the weighbridge in the steelyard or dial headwork. The load cell is connected to the Technoweigh weight indicator Various options of Headwork are available like the Combi Terminal or a standard PC., which can be attached to this indicator.    

Star automations provides complete solutions for the support and maintenance of high value electronic Printed Circuit Boards (PCBs) and modules.We are an electronic engineering company specializing in Repair and Reverse Engineering of Electronic Products.

We are a manufacturer & exporter of electro-mechanical Weigh bridges. VIEW ELECTRO – MECHANICAL WEIGHBRIDGE   ELECTRO MECHANICAL WEIGH BRIDGE (LETEST SYSTEM OF CONVERSION FROM MECHANICAL WEIGHBRIDGE TO MODERN ELECTRONIC WEIGHING SYSTEM). WE DO ANY TYPE OF CONVERSION FROM MECHANICAL WEIGHBRIDGE INTO MODERN ELECTRONIC WEIGHING SYSTEM WITH ELECTRONIC CONVERSION KIT (I.T. SYSTEM BASED OR P.C. BASED WEIGH SYSTEM IS POSSIBLE IN BOTH THE MODELS. We are adding a single "S" TYPE Load cell on connecting rod of transfer Lever. Salient Features - 'S' Type Load Cell Intelligent Terminal Systems (I.T. System) Weight Printout facility Auto Calibration facility Jumbo Display ( extra display)

Difference Between Processor and Controller IO , Address Ports Interrupts & TimerCounter Communication Protocols (UART, SPI, I2C, CAN). ADCDAC & RTC Emerging Bus Standards (USB, Compact PCI, Ethernet) Introduction to AVR Microcontroller Bock Diagram and Description Instruction Set & Addressing Mode Assembly Programming

This double channel electronic outfit is designed for direct reading of load and pore pressure in rock samples. This plug-in transducer module system facilitates easy installation and quick observation of readings.