Testing Machines Dealers in Tri Nagar, Delhi

Interested buyers can place orders with us, timely delivery of the same are our foremost concern. Only quality packaging material has been used for the packing of the products that we offer. Moreover, the entire packaging procedure is conducted under the supervision of the experts.

Ductility Testing Machine, Electrically Operated, Digital Designed to test three specimen simultaneously. The machine consists of a carriage moving over a lead screw. An electric motor driven reduction gear unit ensure smooth constant speed and continuous operation. The entire assembly is mounted with water bath completely encased in metal bound hardwood. It is equipped with an electric pump circulator and heater. The temperature is controlled by digital temperature controller. Two rates of travel i.e. 5 cm/min and 1cm/min are provided. Suitable for operation on 220V, 50Hz, single Phase, AC supply. Ductility Apparatus with cooling arrangement is available on request.

his is a double lever (leverage 1:12) loading machine and the load is applied by flow of lead shots, which automatically stops when the sample breaks. The load is applied at rate of 450 to 550 Nminute (45 to 55 kg minute) or 2000 Nminute (200 Kgminute) and the accuracy of load indication is �± 2%. The sample is mounted between rollers 40 mm dia or12 mm dia. Bearing Rollers can be placed at center distance of 150 mm, 200 mm, 250mm or 270mm as the case may be. Complete with 20 Kg lead shots

Tile Abrasion Testing Machine-VSLIC5024 Product Description This is used for determination of resistance to wear for Cement & Concrete flooring tiles. Tiles specimen of size 7.06 cm x 7.06 cm is pressed face-wise under specific load on a grinding path and abrasive powder is evenly spread on the rotating grinding disc the second parallel side of the tile is subjected to wear for similar number of rotations. The wear of the tile is measured on a thicknessgauge specifically made for the purpose. The machine consists of a disc rotating at a speed of 30 R.P.M. in a circular tray. A bracket is provided to hold the specimen. A counter balance lever loads the specimen. Load applied is 30 Kgf. A funnel is fitted to evenly spread abrasive powder on the grinding path. A Pre-set Counter automatically stops the machine after 22 revolutions. This counteris Re-adjustable. The machine works on 440 V A.C. Three Phase electrical supply. On request machine to operate on 230 V A.C. Supply can also be supplied.

We are one of the strongest entities, engaged in manufacturing, exporting and supplying Treadmill Test Machine. This Treadmill Test Machine has an exercise blood pressure monitor and is also compatible with various Windows systems. This Treadmill Test Machine is very easy to operate and hardly seek major servicing for long

WEIBER has designed customized Vibration test system to meet the generalized testing requirements of various segments of industry and research institutions like Automobile, Electronics, Telecom, Lighting,Aerospace, Packaging,DRDO and Atomic research centre. We are manufacturer of electrical vibration series products, adopted the 'double-magnetic circuit ‘ can be completed in X, Y, Z three axis sinusoidal vibrationtest and broadband random vibration tests, to be completed by the classical (half - sine, trapezoidal, saw tooth wave) pulse and shock response spectrum test.

An Important factor to be considered to test the quality of aluminum cast in checking for the presence of bifilm. Bifilms are oxide layers formed during solidification on the surface of the melt. The presence of bifilm can be identified by porosity testing. When the metal is poured or stirred the bifilm layers formed at the top of the melt folds and drowns in the melt. Presence of bifilms in the melt can results in cracks after solidification. This results in low strength areas. During porosity testing, low-pressure environment is induced this causes the bifilms to expand because of positive pressure in the bifims. Once the melt solidifies, it can be cut to check the size of the pores formed. Bifilm index also indirectly measure hydrogen content in the cast. Porosity testing cannot independently identify hydrogen content as bubbles will not form without the presence of bifilms. It should be noted that porosity forms even without the presence of hydrogen, but the pore size can increase under high hydrogen concentration. Correlation between the properties of the aluminum with the bifilm index have been previously made by empirical tests. The general idea is as bifilm index increases toughness decreases. For a 40x55x15 mm cast a good rule of thumb is a bifilm index of 10mm represent a good quality of the cast, 10- 50mm represents adequate quality and anything above 50mm is considered low in quality.     Technical Specification: Max Pressure = -0.8 bar/-25 in Hg Motor               = 0 .25 hp    

we offer a complete range of tablet disintegration test machine. this instrument is designed for accurate estimation of disintegration time of tabletscapsules. our disintegration test machine is assembled in painted sheet metal cabinet with chemical resistant epoxy coating, fitted with superior quality constant speed sturdy motor. the guide discs and strokes are confirming to pharmacopoeia standards. we are a reputed name when it comes to the foremost disintegration testing machine suppliers. features : digital timer with time hold facilitywater bath for maintaining temperaturedigital temperature controller with water bath.

We are recognized in the global market as one of a prominent Flexure Testing Machine Manufacturers, based in India. Using premium grade components, we have developed Flexure Testing Machine, which is ideal for testing mortar samples for flexural strength. We offer Flexure Testing Machine at the most discounted price in the Industry. Features : Rugged constructionPerfectly measures loadAptly transmits the applied loadTrouble free operationLow maintenanceCompetitive pricing Applications : Pharmaceutical IndustryResearch InstitutionsChemical Industry Flexure Testing Machine 100 KN For 100 x 100 x 500 mm & 150 x 150 x 700 mm Beam : Hand OperatedElectrically Operated

Our Portable exhaust emission analyzer MEXA-584L,is used for measuring and testing the emssion sample for various components like Co,Hc,Co2,o2,No,Lambda,AFR,RPM,Oil Temperature.The application varies from Vehicle Exhaust,Engine Exhaust,Genset application,PUC Testing and various emissions.

Cube Testing Machine, Surveying Instruments, Test Sieve, Cube Mould

This is apparatus is used to determine softening point of bitumen, Ring and ball apparatus is used to determine softening point. It is that temperature at which a sample of bituminous material loaded by a 9.5mm dia.-steel ball, drops at a distance of 25mm. The apparatus consists of steel bracket with a sliding plate support. That support has two holes of 10mm dia. on which a Ring and Ball guide can be kept. A central Hole on this plate is for inserting thermometer. Supplied with a glass beaker approximate 8.5cm I.D., 12cm high and a hand stirrer and 2 nos. 9.5mm dia. steel balls.

Cube Testing Machine, Lab Testing Instruments, MATERIAL TESTING INSTRUMENT

Ultrasonic Testing Machines, QUARTZ SINGLE DISTILLATIO

Abrasion Testing Machine, Lab Concrete Mixe

Cube Testing Machine, Electrical Testing Equipment, Measuring Equipmen

Cable Testing Machine, Sequential Marking Machin

VANE SHEAR TESTING MACHIN

Tensile Testing Machine, Horizontal Autoclave, Lab Equipmen

Tensile Testing Machines, Universal Testing Machine