Tilting Table Dealers

Electrically operated tilt table with foam padded top, provided with three straps to hold the patient. Heavy duty imported motor provides silent and smooth lifting action with easy to operate remote control switches. Range of electronic tilt table is adjustable between 0 to 90 degrees. The table top is 60 cm wide x 180 cm long x 80 cm high, and is fitted on a heavy duty tubular steel frame with four locking wheels of 10 cm dia for easy mobility. It works on 220v ac. Technical specifications: *90 degree tilt function using hand remote control * removable activity tray *large braking wheels *tilt angle indicator. *three support belt - thoracic, pelvic & knee * maximum load capacity 225 kg * power supply 220-240v, 50hz

Manually operate Tilt Table comes with Three wide straps to hold the patient. Works to standing position manually with worm gear arrangement. Range of tilt is calibrated from 0-90 deg.  The uphosltered table top is 61cm wide x 195cm long x 80cm high,and is fitted on heavy duty 35mm square steel tube legs. Mounted on four lockable 10cm dia. wheels for mobility. Table comes complete with an Utility Tray & Two Gripping Handles for A.D.L. activities.  Frame beautifully finshed in oven baked light blue shade.

In a Deep Tilting Rotary Tables the Swing Diameter is larger as compared to the Turn Table Diameter to accommodate larger diameter component on to a smaller table. Features Hydraulic Clamping Pre-Loaded Axial Radial Roller Bearing High Grade C I Construction Dual Lead Worm Gear set  

Hi low tilt table with remote control,adjustable activity tray,adjustable foot rest,tilt angle indicator,3 support belts,large locking castor . Height adjustable to wheel chair height.

Tilt angles 0 to 90 degree, the patient firmly holds to three straps provided. The tabletop is 61cm x 195cm long x 80cm high, and on heavy-duty 35mm steel tube legs with 10cm. Dia wheels. Two griping handles for various activities.

Electrically operated Tilt Table with foam padded top, provided with three straps to hold the patient. Heavy duty motor provides silent and smooth lifting action with push button control switches. Range of tilt is calibrated from 0 - 90 degrees.The table top is 61cm wide x 195cm long x 80cm high, and is fitted on a heavy duty tubular steel frame with four locking wheels of 10 cm dia. for easy mobility. Table comes complete with an Utility Tray and gripping handle for ADL activity. Full 90 degree of tilt plus negative facility also Steel frame oven baked finish.Works on 220 V AC.

special design for angle setting on various machine tools.* low profile for larger working space.* the table is set manually to the required tilt and is locked in the set position by means of two locking clamps held through bolts.* can be adjusted by 45 degree on both right-hand and left-hand side.* the angle marking are accurate and easy to read. .

Pneumatic Clamping system, with built-in patented disk-clamping design (Taiwan PAT.: 217736) to ensure cutting endurance. The feature of wear resistant alloy Dual-Lead Worm Gear is high mechanical efficiency of power transmission, high indexing accuracy and easy adjusted on the backlash. Able to be connected with CNC machine to perform synchronous 5th axis multi-angle machining. Able to be connected with CNC machine to perform tilting angle machine (4+1 axis) through Single Axis Controller. Minimum Indexing Degree: 0.001° Tilting range: +/- 110 °    

Tilting Table - Overview Tilting Table is a useful accessory for setting work at an angle for milling or other operations. The table has machined T-slots along length and can swing up to 45° on either side.For setting purposes a degree scale, reading minimum one degree, is graduated on the end face of cylindrical base itself. This ensures better setting accuracy. The table is set manually to the required tilt and is locked in the set position by means of two locking clamps held through bolts. Salient Features Made from close grained plain cast iron conforming to grade FG 220 of IS 210 (equivalent to GG20 / FT20 / 30-A). Higher grades also offered on request. Castings stress relieved to relieve internal stresses. Table top and base are flat and parallel within 0.05 mm per 300 mm. T-slots are parallel to the edge of the table and the cylindrical base within 0.05 mm per 300 mm. Offered in sizes as shown in the table.

  Tilting table with payload of up to 25t. Specific for MINIDREL S and B series. Optional installation of pushers.

Electrically operated tilt table with foam padded top, provided with three straps to hold the patient. Heavy duty imported motor provides silent and smooth lifting action with easy to operate remote control switches. Range of electronic tilt table is adjustable between 0 to 85 degrees. The table top is 61cm wide x 198cm long x 80cm high, and is fitted on a heavy duty tubular steel frame with four locking wheels of 10 cm dia. for easy mobility. Oven baked finish. Works on 220V AC.

Made of heavy duty 35mm mild steel tube legs with 10 cm dia wheels, tilt angles 0 to 90degree, the patient firmly holds to three straps provided. The table top is 61cm*195cm*80cm high. Two griping handles for various activities.

Electric Tilt Table are manufactured using top notch, heavy-duty materials. Our Electric tilt table has adjustable height, angle indicator and removable footrest, Heavy duty motor, Remote control for angle adjustments, etc. Features   Elevated frames to allow proper lifting Heavy duty motor lift up to 500 Kg Powder coated frames that resist rusting and scratching Remote control for up-down adjustments Three extra wide movable patient positioning straps Locking swivel casters Removable footrest Angle indicator

  SEERS Therapy Tilt Table These excellent Tilt Tables have been designed to meet the requirements of a wide range of applications for rehabilitation, assessment, and examination procedures. Available with the option of “divided leg design” which provides individual harness security for the lower limbs. Standard Model SpecificationSafe working load with lifting and tilting capacity (from minimum height) of 225kgs (495lbs=35 stone)Large wheel design with central locking and steering facility on Standard modelIndividual braking castors on Economy modelElectric height and tilting operation with hand switch controlAdjustable angle dual footboards – positive and negative (+15 to -30)Worktable supplied with Standard model – optional with Economy modelSupplied with patient handgrips and set of harnessesHeight range 47cm to 101cm (18-39”), Tilt angle from horizontal to 90 degrees verticalLowers to wheelchair height for ease of patient transferTilt angle inclinometer fitted as standardPurpose made precision bearings on all pivot points\Clearance beneath frame for mobile hoistChoice of upholstery colours   Optional Couch AccessoriesModel 6057 Battery back-up facilityModel 6058 Hip/Leg Stabilisers (pair)|Model 6059 Adjustable Pommel Support#Model 6060 Child Footboard Facility#Model 6007 Head Support CushionModel 6062 Tilt Table – Standard Harness SetModel 6063 Tilt Table – Dual Leg Harness Set #Model 6064 Tilt Table – Pair Dual Knee Harnesses#Model 6065 Tilt Table – Standard Harness – WideModel 6066 Tilt Table – Standard Harness – NarrowModel 7648 – Worktable for Economy model