Tilting Table Dealers

(105 products available)
  • Premium
    Hi Low Motorized Tilt Table(Electric Operated)

    Hi Low Motorized Tilt Table(Electric Operated)

    71,000 / piece

    • MOQ1 Piece
    • MaterialMetal
    • ConditionNew
    • FeatureLong Life, Low Maintenance, Rust Resistance, Shocked Proof, Stable Performance
    • Country of OriginIndia
    • Brand NamePHYSIO CARE DEVICES
    • Driven TypeElectric
    • Automatic GradeSemi Automatic
    • PowerWorks On 210 -240 V
    • CertificationCE Certified, ISO 9001:2008
    • Warranty1year
    • Load BearingHeavy-duty electric Motor that safely accommodates up to 220 kg load
    • MotorsUnit is fitted with one Motor power of 8000 Newton actuators Tilt.
    • MobilityMounted on 4 locking 5”casters.
    • Utility TrayLaminated surface for ADL activity
    • Technical Specification Made of heavy duty crc pipe , with permanent lubricated bearings & Powder coated finish Upholstered Top Size : 190cm long x 68cm wide , 2" hard density urethane foam mattress top Removable Padded footboard. Size 20”/18” Straps: Three, 10cm wide Straps to hold the patient Height: Base / Top adjusts in Height from 65cm to 100cm Tilt Angle: Horizontal to 90 degree vertical contact for more information 9891242824 in 60seconds Motors: Unit is fitted with Two Motor actuators for Lift & Tilt. Control; Controlled by a wire remote Hand Control Switch (4 Buttons) with remote.     1st Motorized Actuator: Height Adjustment.  & 2nd Motorized Actuator: Tilt Angle Adjustment (0º to 90º) Load Bearing: Heavy-duty electric Motor that safely accommodates up to 220 kg load Motors: Unit is fitted with one Motor power of 8000 Newton  actuators Tilt. Mobility: Mounted on 4 locking 5”casters. Utility Tray: Laminated surface for ADL activity Power: Works on 210 -240 V ~; 50/60 Hz
    ...more
    www
  • Premium
    Steel Hi-Low Tilt Table

    Steel Hi-Low Tilt Table

    Get Price Quote

    • FeatureSimple & Efficient Mechanism To Raise & Lower The Table To Near Ground Level. Allow Oiled Patients Who Are Fat / Have Large Body Frame To Climb Up & Get Down From The Dharapathi Safely & Effortlessly Without The Help Of An Assistant. All Types Of Dharapth
    • MaterialSteel
    • PackagingStand Only. Dharapathi Sold Separately
    • Number Of FlowerHi-Low Tilt Table
    • ApplicationFor Shirodhara, Anjana, Pizhichil, Sarvangadhara Procedures
    • Special FeatureTilt Model For Tilting Head-end & Legend
    • Features: Simple & efficient mechanism to raise & lower the table to near ground level. Allow oiled patients who are fat / have large body frame to climb up & get down from the dharapathi safely & effortlessly without the help of an assistant. All types of dharapthi can be placed on this table. Tilt Model : Enables tilting of the head-end & legend for shirodhara / anjana / pizhichil /sarvangadhara procedures. Prices quoted are for the Stand only. Dharapathi sold seperatelyPrices Without Tilt: ₹ 19,600 With Tilt: ₹ 21,600
    ...more
    www
  • Tilting Rotary Table

    Tilting Rotary Table

    Get Price Quote

    • Number Of Flowerrotary table
    • Country of OriginIndia
    • 4” (100 mm) Tilting Rotary Table with a 65mm- 3 Jaw Self Centering Lathe Chuck for Milling Machine This Whole Package Includes below : - 1 Pc. 4” 100 mm Tilting Rotary table 1 Pc. of a high quality 65 mm 3 Jaw self centering Chuck 1 Pc. of a back plate which has holes in a manner that it can be fitted on to a 3 slot as well 4 slot Rotary table. 3 set of T nut to clamp tighen the Back Plate with the Tee slots of the Rotary Table. Description of the 4" Tilting Rotary Table:- Features to tilts between 0- 90 Degrees & can be locked at any position. Table diameter 100 mm Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Center Height in vertical position: 2-58" (66 mm approx) without the chuck. Hand wheel is graduated in divisions of 10 min & can be set to zero. Can be mounted both in Horizontal & vertical position
    ...more
  • Tilting Table ( Swivel Base )

    Tilting Table ( Swivel Base )

    Get Price Quote

    • Size5x7", 7x10", 10x15"
    • Features : Special design for angle setting on various machine tools. Low profile for larger working space. The table is set manually to the required Tilt and is locked in the set position by means of two locking clamps held through bolts. Can be adjusted by 45° on both right-hand and left- hand side. The angle marking are accurate and easy to read. Application : Useful accessory for setting work at an angle for milling or other operations. Construction : Cast Iron Stress Relieved Tilting Table. The unique design on Connecting Plate and 360° Graduated Swivel Base, making it possible for the Angle Plate to do rotation at any angles. Finish : Hammer tone mid grey.  
    ...more
  • Pediatric Tilting Table

    Pediatric Tilting Table

    Get Price Quote

    • MOQ1 Piece
    • Country of OriginIndia
    • Castor Diameter Mm125mm / 5 inch
    • Overall Dimension78″ Length x 24″ Breath x 30″ Height
    • Castor2 with Brake + 2 without Brake
    • Frame MaterialMild Steel
    • Capacity200kg
    • Tilting Degree0 to 90
    ...more
  • Tilt Table Motorized ,Physiotherapy Equipment

    Tilt Table Motorized ,Physiotherapy Equipment

    Get Price Quote

    Product description: electrically operated tilt table with foam padded top, provided with three straps to hold the patient. Heavy duty imported motor provides silent and smooth lifting action with easy to operate remote control switches. Range of electronic tilt table is adjustable between 0 to 85 degrees. The table top is 61cm wide x 198cm long x 80cm high, and is fitted on a heavy duty tubular steel frame with four locking wheels of 10 cm dia. For easy mobility. Oven baked finish. Works on 220v ac.
    ...more
  • Tilt Table Motorized

    Tilt Table Motorized

    Get Price Quote

    TILT TABLE MOTORIZED : Owing to our wealthy trade expertise and information, we've got been engaged in providing an impressive quality vary of Tilt Table motored. This product is meant and made in conformity with set quality set standards with the help of progressive technology. Also, this product is exactly tested on variety of quality parameters to make sure well end. We provide this product at market leading worth to our revered customers.
    ...more
  • Hi Low Tilt Table

    Hi Low Tilt Table

    Get Price Quote

    Hi Low Tilt table with Remote Control,Adjustable activity tray,Adjustable Foot rest,Tilt Angle Indicator,3 Support Belts,Large Locking Castor . Height Adjustable to Wheel Chair height. Additional Information: Pay Mode Terms: LC (Letter of Credit),Other
    ...more
  • Tilt Table

    Tilt Table

    Get Price Quote

    Aditron Lifting Cum Tilting Table for Light Heavy Duty Industrial Service and Maintenance works with Capacities from 200 kgs. to 10000 kgs. with Double Acting High Pressure Hydraulic Pump with Release Valve and Replaceable Oil Seals. Multi-Scissor Mechanism, Motorised Power Packs with Customised Controls for Manual, Semi Automatic or Fully Automatic Operations made to Order - Applications.
    ...more
  • Tilt Pour Rotary Table

    Tilt Pour Rotary Table

    Get Price Quote

    The  Rotary Casting Machine advances permanent mold casting technology another step and makes it the most profitable approach for the modern foundries today. This high production, completely automated system can meet your needs for large volume applications. We incorporate up to 12 of our standard casting machines (#2H, #3HS, #6H or RT machines) on one rotary table to reduce cycle time in each station to as little as 20 seconds. As an example, based on our 8-station 2H Rotary Table, we have calculated that eight seconds is necessary to index the table between stations without inertial forces affecting feed characteristics of castings. Assuming a three minute (180 second) cooling cycle, this rotary system will theoretically produce 120 cycles per hour. At 83% of theoretical, it would be 100 machine cycles per hour. At 100 hours per week, this calculates out to 10,000 machine cycles per week. If there are two cavities, it will produce 20,000 parts week . This will give a total production of nearly one million parts per year!
    ...more
  • Automatic Tilt Table

    Automatic Tilt Table

    Get Price Quote

    • Number Of FlowerTilt Table
    • ApplicationClinical, Hospital
    • Packaging TypeCreamy
    • FinishingPolished
    • FeatureDurable, Easy To Place
    • Folding StyleNon Foldable
    ...more
  • Everest Tilt Massage Table

    Everest Tilt Massage Table

    45,500,000 / Piece

    • Applicationelectric lift actuator provides smooth and quiet height adjustments Heavy Duty Steel Frame
    • Brand NameEVAVO
  • Electric Tilt Table

    Electric Tilt Table

    Get Price Quote

    Electric Tilt Table are manufactured using top notch, heavy-duty materials. Our Electric tilt table has adjustable height, angle indicator and removable footrest, Heavy duty motor, Remote control for angle adjustments, etc. Features   Elevated frames to allow proper lifting Heavy duty motor lift up to 500 Kg Powder coated frames that resist rusting and scratching Remote control for up-down adjustments Three extra wide movable patient positioning straps Locking swivel casters Removable footrest Angle indicator
    ...more
  • Heavy Duty Tilt Table

    Heavy Duty Tilt Table

    Get Price Quote

    • Dimension(cm): 202 x 79 x 109
    • Weight71.0kg
    • Rated Load135.0kg
    • Tilt Table is composed of frame, desktop, fixing belt, standing board, bed board and angle adjustment device. When doing standing exercise, the user should lay on the bed board, and be fixed by the bed board, fixing belt and desktop. The bed board can be adjusted by angle adjustment device to change the patient’s posture from 0° (decubitus) to 90° (stance) gradually, and adjust randomly. Dimension (cm): 202 x 79 x 109 Weight: 71.0kg Rated Load: 135.0kg Application: Used for patients with hemiplegia, paraplegia and other severe cases to do standing exercise during recovery training.
    ...more
  • Manual Tilt Table

    Manual Tilt Table

    25,000 - 50,000 / piece

    tilt table manual : tilt angles 0 to 90 degree, the patient firmly holds to three straps provided. The tabletop is 61cm x 195cm long x 80cm high, and on heavy-duty 35mm steel tube legs with 10cms. Dia wheels. Two griping handles for various activities. tilt table motorized : owing to our wealthy trade expertise and information, we've got been engaged in providing an impressive quality vary of tilt table motored. This product is meant and made in conformity with set quality set standards with the help of progressive technology. Also, this product is exactly tested on variety of quality parameters to make sure well end. we provide this product at market leading worth to our revered customers.
    ...more
  • Tilt Table

    Tilt Table

    Get Price Quote

    • Choosable2 or single section
    • AutomaticTilts upto 87 degrees
    • Offering Automatic Tilt Table, Length 75 inches, width 224 inches, Height adjustment 38 inches approx and minimum 19 inches , 3 sets of Velcro Straps for Secure position, 2 sets of wooden strong support - 1 for leg and 1 for hands.Also available as 2 section model.
    ...more
  • NC Tilting Rotary Table

    NC Tilting Rotary Table

    Get Price Quote

    Pneumatic Clamping system, with built-in patented disk-clamping design (Taiwan PAT.: 217736) to ensure cutting endurance. The feature of wear resistant alloy Dual-Lead Worm Gear is high mechanical efficiency of power transmission, high indexing accuracy and easy adjusted on the backlash. Able to be connected with CNC machine to perform synchronous 5th axis multi-angle machining. Able to be connected with CNC machine to perform tilting angle machine (4+1 axis) through Single Axis Controller. Minimum Indexing Degree: 0.001° Tilting range: +/- 110 °    
    ...more
  • Universal Tilting Table

    Universal Tilting Table

    14,015 / Piece

    • Brand NameOzar
    • Number Of FlowerTilting Table
    • Size100 x 125 mm
    • No. of Slots2 Slots
  • Clinical Tilt Table Manual

    Clinical Tilt Table Manual

    Get Price Quote

    • MOQ1 piece
    • ApplicationClinical
    • Total Carbohydrate12 months
    • Country of OriginMade in India
    • Length6 Feet
    • Lifting Capacity150kg
    • Question40 kg
    • Mild Steel / Stainless Steelmetal, wooden
    • I Deal InNew Only
    • After Sales Service AvailableYes
    • EnvironmentOutdoor
    • A tilt table test shows how your body responds to standing up after lying down. It does it in a safe way, with fabric straps keeping you from falling if your blood pressure drops. Healthcare providers monitor your vitals while the table you’re on tilts at various angles. This allows them to find out why you faint.
    ...more
  • Tilting Table

    Tilting Table

    Get Price Quote

    special design for angle setting on various machine tools.* low profile for larger working space.* the table is set manually to the required tilt and is locked in the set position by means of two locking clamps held through bolts.* can be adjusted by 45 degree on both right-hand and left-hand side.* the angle marking are accurate and easy to read. .
    ...more
  • Tilting Table ,adjustable Angle Plates

    Tilting Table ,adjustable Angle Plates

    Get Price Quote

    We are Manufacturer and Exporter of Tilting Table (adjustable Angle Plates)the Company is Capable to Build Custom Design Tools as per Order Specification.contact Us for More Details
  • Tilt Table

    Tilt Table

    Get Price Quote

    Made of heavy duty 35mm mild steel tube legs with 10 cm dia wheels, tilt angles 0 to 90degree, the patient firmly holds to three straps provided. The table top is 61cm*195cm*80cm high. Two griping handles for various activities.
    ...more
  • Tilting Tables - Adjustable Angle Plates

    Tilting Tables - Adjustable Angle Plates

    Get Price Quote

    • Height3-3/4Inch, 95Mm
    • Size5 x 7 INCH, 125 x 175Mm
    • Tilting Tables - Adjustable Angle Plates, Heavy and sturdy machined castings. Range 45° each way from vertical. Locking action by 2 clamping Screws on each end. Low profile for low machine head clearance. 3 Machined "T" slots and precise ground table surface .
    ...more
  • Tilting Table

    Tilting Table

    Get Price Quote

    Features : Special design for angle setting on various machine tools. Low profile for larger working space. The table is set manually to the required Tilt and is locked in the set position by means of two locking clamps held through bolts. Can be adjusted by 45 degree on both right-hand and left- hand side. The angle marking are accurate and easy to read. Application : Useful accessory for setting work at an angle for milling or other operations. Construction : Cast Iron Stress Relieved Tilting Table. Finish : Hammer tone mid grey.
    ...more
  • Tilt Table

    Tilt Table

    25,000 / Piece

    • MOQ1 Piece(s)
    • Number Of FlowerTilt Table
    • MaterialMild Steel
    • ShapeRectangular
    • ApplicationClinical, Hospital
    • Packaging TypeCreamy
    • FeatureDurable, Easy To Place, Fine Finishing, Foldable, High Strength, Quality
    • ConditionNew
    • FinishingNon Polished
    • Folding StyleFoldable
    • Electriclly operated tilt table with foam padded top provided with 3 straps to hold the patient.heavy duty motor provides silent & smooth lifting with remote switch.range of lits is caliberated top 0-90 degree.
    ...more
  • Tilting Rotary Table

    Tilting Rotary Table

    Get Price Quote

    • ApplicationMachining
    • FeatureEnhanced Machining Capabilities
    • PackagingBox
    • DimensionsStandard
    • WeightMedium
    • SizeStandard
    • Enhanced Machining Capabilities: A Tilting Rotary Table allows machining on multiple faces of a component in one setup, reducing time and increasing productivity. Complex Geometry: It simplifies the process of machining angular surfaces, contours, and spherical designs. Precision and Repeatability: Ensures exact positioning and alignment for high-accuracy machining. Reduced Setup Time: Eliminates the need to reposition the workpiece, minimizing errors and downtime. Versatile Applications: Suitable for a variety of operations like drilling, tapping, engraving, and contour machining.
    ...more
  • Tilt Table

    Tilt Table

    Get Price Quote

    Motorised Tilt table to make the patients stand with support straps.This tilt table is used for long term Bedridden patients, Spinal cord injuries, Brain stroke cases ext..
  • Hydraulic Tilt Scissor Lift Table

    Hydraulic Tilt Scissor Lift Table

    225,000 / Piece

    • MOQ1 Piece
    • Power SourceHydraulic
    • Capacity2 Ton
    • MaterialMild Steel
    • PowerAC
    • Brand NameRagnor
    • Usage/ApplicationMaterial Handling
    • Running ModeHydraulic
    • Lift MechanismScissor
    • Height1500mm
    • Lowered Height250mm
    • Is It Rust ProofRust Proof
    • AMCYes
    ...more
  • Hydraulic Core Tilting Table

    Hydraulic Core Tilting Table

    Get Price Quote

    Vikrant manufacturers core assembly platform for assembly of 35 limbed core for distribution & power transformers with bottom and top yoke. Centre distance and length of the limbs are adjustable as per customers requirement. The assembly can be done without the top yoke also as per user's practice. The core table is made vertical by means of 24 hydraulic cylinders on capacity of the platform.
    ...more
  • S&t Engineers Vertex Tilting Rotary Table VUT-6

    S&t Engineers Vertex Tilting Rotary Table VUT-6

    Get Price Quote

    • Number Of FlowerTilting Rotary Table
    • ApplicationMilling Machine Accessories And CNC Machines Accessories
    • ModelVUT-6
    • Degree/Handle Rotation6°/4°
    • Vernier Reading1
    • Gear Ratio1:90
    • S&T Engineers - Authorised Distributors Of Vertex Milling Machine Accessories And CNC Machines Accessories In India. S&T Engineers Vertex Tilting Rotary Table VUT-6 At Best Price In India Degree/One Handle Rotation 6°/4° Vernier Reading VUT-6-1 "/20 " Gear Ratio 1:90
    ...more
Filter by City
top