Industrial Valve Dealers in Chembur, Mumbai

We Are The Manufacturer And Supplier Of Pipeline Specialty Valves Which Have The Following Types: Teleflo Float Valves, Teleflo Flush Bottom Valves, Teleflo Instrument Valves, Teleflo Instrument Valve Manifolds And Fittings, Teleflo Pressure Gauge Manifold Valve, Etc.We have in our repertoire a qualitative range of Flush Bottom Valves. These are compactly and sophisticatedly designed for offering easy installation in the required application. Our range also comprises rising and receding discs that facilitates in stabilizing the valve functioning. These are made available in different sizes ranging from 15 NB to 300NB and also customized to meet the specific requirements of our clients.

We offer Disc Check Valve. Disc Check Valves are recommended after traps discharging into closed systems to guarantee Non return or no reverse flow. These check valves can be mounted between pipe flanges in any direction. DCVs feature a compact and rugged stainless steel design and are suitable for any process liquid & gas, apart from steam. Disc Check Valves are designed to be sandwiched between flanges i.e. Wafer type. They are suitable for use on a wide range of fluids for applications in process lines, hot water systems, steam and condensate systems etc. Face-to-face dimensions conform to EN 558 part 2, series 52. •As standard it will be supplied with a metal-to-metal seat for use on steam applications. Springs are suitable for high temperatures up to 400°C. •MOC: ASTM A 351 Gr. CF8M •Sizes: 15mm to 150mm •Pressure: #150 and #300 •IBR IF REQUIRED

Gate valves, when used with a fluid that contains any amount of sediment, are prone to sediment build-up in the seat area, with resultant poor sealing. For this reason they are a poor choice for "shutoff valves" in, eg, domestic water systems.

Atmospheric Air mainly consists of Oxygen and Nitrogen gases along with small quantities of water vapour, Carbon Dioxide, Argon, Helium, etc,Oxygen and Nitrogen from the Air are separated due to difference in boiling points by distillation through a fractional column.

Pumps Valves, High Purity Water System, WATER Plant Maintenance Service

The PRV valve protects domestic, commercial and industrial applications against excessive water supply pressure. It reduces both water consumption and noise from water hammer, while minimising over pressure damage. The set outlet pressure can be maintained even when there are wide inlet pressure fluctuations. A drop tight seal means outlet water pressure will not increase when there is no flow. It has been awarded the Waterwise Marque.   Features:   Outlet pressure set by turning the adjustment knob Set pressure directly indicated on the set point scale Adjustment spring not in contact with wholesome water Valve insert is of high quality synthetic material and can be fully exchanged Integral fine filter (160 microns) Available without fittings Light weight Reliable and proven Drop tight max. 16 bar with clear filter bowl or max. 25 bar with brass filter bowl inlet pressure 1.5 - 6 bar outlet pressure Available with pressure gauge   Options:   1/2" and 3/4" Female BSP connections 15mm and 22mm connections  

63mm Single outlet BSP Screw Threaded Landing Valve, having 75mm NB inlet & 63mm Female Instantaneous Outlet. 1 ½” 2”2 ½” Gun Metal BrassS.SC.I

Breather Valves, Asbestos, Flame Asbestos, Emergency Relief Valve

cast iron / cast steel wafer design butterfly valve, body as per ci is 210 gr. Fg 200 / astm a 216 gr. Wcb, s.g. Iron / s.s. 304 / s.s. 316 disc, aisi 410 / 304 / 316 spindle, suitable for mounting between two flanges of ansi – 150, lever / gear operated, valve as per bs 5155 / api 609 class - pn 1.0 / pn 10 / pn 16 butterfly valve manufacturers, dealers, suppliers, traders, wholesalers, distributors and exporters in mumbai, india to all over the globe. Butterfly valve manufacturer according to international specifications and iso standards certified since 1978 with long lasting, less maintenance and efficient as well as required industrial characteristics and features to delivered more than expected performance, functions and operation.

SIGMA’s Needle Valve are available in two way, three way, multiport, single block & bleed, double deck and bleed. These Needle valves are available in variety of end connections screwed male/female pipe ends which confirm to ferrule designs. Valves as per custom needs with any end connections, for pressure ranging from 10 kg/cm2 to 700 kg /cm2, can be offered. Isolation needle valve upto 10000 PSI are available for hassle free long life in process lines. These valves can be used to isolate, calibrate and drain the process lines.

We offered Swing Check valves are manufactured to API Std. 6D and API Std. 600, and tested to API Std. 598. Swing check valves are used to prevent flow reversal in piping systems. They are suitable for service in horizontal or vertical (flow up through valve only) piping tuns. Swing check valves have low pressure drop and are best suited for moderate velo0city applications. Body Its spherical form of large radius allows for the stresses. turbulence and resistance to flow to be kept to a minimum. BODY-BONNET JOINTS Body-Bonnet Joints of check valves are machined as follows : On 150 and300 classes ; male and Female. On 600, 900 and 1500 classes : RTJSeat Rings Seat ring are manufactured in two different ways, depending on the class and type of valves: 1) Screwed seat rings, bottom seated type lapped on both side. They are dry assembled, with a controlled torque setting to t body. 2) Welded-in seat rings, designed in order to prevent any turbulence and avoid damages due to corrosionBoth are forged or rolled in one piece, for all dimensions. They are heat treated to obtain the requested surface hardness, and are perfectly cleaned before assembling.Insert Seat RingsThese rings are manufactured with teflon or viton inserts, depending on fluid and service conditions. They provide an elastometer primary seal. combined with a fire sale metal to-metal secondary seal, for temperatures from - 100oC (-144oF) to 204.4oC (400F).Where maintenance is a potential problem the viton insert is in the form of a toroidal ring so that it can easily be removed END CONNECTIONS Our standard production covers valves with : Flanged ends (RF) that conform to ANSI B 16.5 and face to face dimensions that conform to ANSI B 16.10, with a raised face serrated finish or, on request, with any other of finish. Butt-welding ends (BW) with end to end dimensions that conform to ANSI B 16.10. Customer must specify the type of schedule required, or class of pipe, or diameter and bore. Ring-joint flanged ends (RTJ) that conform to ANSI B16.5, with end to end dimensions ANSI B 16.10 Other Special end connections are supplied to customers’ special requirements. Special Constructions A) Outside lever and weight     On request swing check valves can be furnished with an outside lever and weight. The object of the lever and On weight is either to balance the disc or give it     added weight. In balancing the disc the valve will open with a minimum of pressure. When the disc is weighted the valve will be very sensitive to a reversal of     flow.B) Dashpot feature     In case of intermittent use or in presence of thrusts, dashpot feature is highly recommended.     In such instance the dashpot feature gradually causes the opening and closing of disc preventing therefore dangerous shocks. C) Check valves with pneumatic safety control     This is in the form of a simple pneumatic piston. In normal conditions of use, it pushes up the lever, thereby moving a special cam, that allows the disc to     move.    Should there be no air in the cylinder, the spring allows the lever, and hence the disc to descend, thereby assuring that encloses before any inversion of flow.

Vertical Check Valve, Centre Hole Basin Mixer, Angular Stop Coc