Cleaning Systems Dealers in Pune

Centrifugal oil cleaning system It first passes through a mechanical filter which collects larger partics. The air is than passes through Ionizer where it is subjected to an intense electrostatic field. All the oil mist & Smoke particles receive a strong electrical charge.

The compact modular design allows the “hafi” Central Vacuum Cleaning System to be set up in almost any room with a minimum of area blockage. The system comprise of : a) Vacuum Generating Unit (Multistage Vacuum Exhauster) b) Collecting Hopper (Filter-cum-Collection Chamber) c) PVC Vacuum Line d) Suction Inlet e) Standard Accessories a) Vacuum Generating Unit : Comprising of Multistage Exhauster of latest design, coupled to a 10HP, 3Ph Motor and suitable star-delta starter. The entire assembly is mounted on rigid trolley for easy handling. The unit is connected to the Filter-cum-Collection Hopper. b) Filter-cum-Collection Hopper : The construction is proven design, eliminating the manual shaker mechanism design. The collection chamber is of 200 Ltrs. capacity. The Filter chamber is mounted inside the collection tank and the material is collected in the bag. c) PVC Vacuum Line : The best quality PVC Pipes and Fittings are used to enable simple, speedy assembly of Vacuum Line network requiring no special tools or flanges. The PVC Lines are laid in parallel rows running across the width of the room. Two or three such rows are connected to a single collection hopper to form an independent vacuum circuit. Each circuit has sufficient suitably designed suction inlets. d) Suction Inlets: Designed to be kept in closed conditions and is opened only at the time of cleaning operation. If a particular inlet is to be used, the flap is raised and the hose connection is inserted into the suction inlet and arrested place by the ‘O’ ring Assembly. In this manner, you have a flexible hose at your disposal for vacuum cleaning. Normally, all the suction inlets remain closed. As and when cleaning operation is to be carried out suction inlet flap is to be opened and suction pipe is inserted into the inlet. At a time you can use two suction inlets for cleaning. e) Standard Accessories :. These are tools to enhance the utility of the vacuum cleaning system. The standard accessories are : 1. PVC Flexible hose assembly, which permits you to extend the vacuum line to any point that you desire. 2. The extension pipe enhances reach and allows to work in a comfortable posture. 3. The Rectangular Brush, which can be used for removal of dust, fluff & granules from large areas, such as walls, floors etc., * 4. The Round Brush, which is used for cleaning small and delicate parts. * 5. The Flat Nozzle is useful to clean intricate areas. * 6. The Floor Cleaning Attachment is ideal for cleaning floors. ADVANTAGES : 1. Practically unlimited application in all Industries. 2. Increased productivity due to faster cleaning and therefore, less machine downtime. 3. Strong Suction and High Suction Capacity.: Even great quantity of voluminous fly and dust are sucked up and collected in the central container. Oily, sticky fly is also removed easily from all the machine parts and floors. 4. Reduced wear on production machines due to quick, thorough cleaning. 5. No blocking of aisles with bulky mobile vacuuming devices, no accident risk from electric cables on the floor. 6. Better conditions for workers because of reduced dust content in room air. Whirling up health-endangering dust particles with blasts of compressed air are avoided. 7. Improved working conditions for cleaners. 8. The large filter/collecting drum with 200 Liters. Capacity provides the advantage of long cleaning intervals without time consuming intermediate emptying. 9. High vacuuming capacity at each plug-in connection. Maximum suction capacity is always available at every suction port. For cleaning, the suction hose is simply inserted in the nearest connection. 10. Even difficult, often unpleasant cleaning tasks can be carried out simply, quickly and neatly. 11. Users can select from a variety of accessories – hoses, floor- vacuuming attachments, vacuum brushes, etc. according to individual need.

We manufacture cleaning system that are appreciated for their host of qualitative features. The entire gamut is manufactured using qualitative raw material sourced from reliable vendors. These find wide application in water treatment plant. Our range of cleaning system are available in various technical specifications that can also be customized as detailed by the clients.

We are offering oil cleaning systems. minimac offers trolley mounted portable oil cleaning machines which can clean almost all industrial oils to super-clean levels nas 4 even from dirtiness levels of nas 99. Another prime advantage with these machines is that low vacuum dehydration attachment is in-built for fast removal of moisture / water from the oil. these machines are versatile in usage and can be used to clean oil in tanks (online) or in offline barrels and stand-by tanks. The benefit of such systems is that a single machine can be used to clean number of oil tanks in a plant. However the performance of the machine will depend largely on usage by factory personnels who will have to schedule it to different oil tank locations sincerely and religiously. oils which can be cleaned : hydraulic oil turbine oil gear oil lubrication oil engine oil compressor oil thermic fluids transformer oils honing oil quenching oil edible oil flushing fluids testing oils water glycols fire resistant fluids rust preventive oils edm oil solvents etc. turbine oil cleaning systems hydraulic oil cleaning systems transformer oil cleaning systems turbine ehc filtration systems gear oil filtration systems thermic oil filtration systems frf conditioning systems portable filtration carts

This is independent & portable standalone system which has inbuilt pump & motor thus no need of engine oil pressure for drive. It can be moved on wheels from one place to another and can be used for multiple applications on-board where engine mounted centrifuge can’t be fitted. Standalone system is particularly useful for main engine & other oil cleaning applications on-board like Diesel Oil Cleaning, Hydraulic Oil Cleaning , Gear Oil Cleaning and many more. We supply this unit as per power supply requirements available onboard, available in multiple voltages & multiple frequency range.

Centrifugal Oil Cleaner operates on the Reaction turbine principle. Oil enters the Centrifuge under pressure and passes into the rotor thru hollow rotor shaft. The oil pressure and flow is converted in rotational energy as the oil escapes through the jets, producing speed up to 7000 RPM & above. The resultant Centrifugal force removes dirt from the engine oil depositing it on the inner wall of rotor in a dense cake form. Clean oil drains back directly to the tank.

Reliable, durable, affordable price. Visual buttons on the instrument panel, easy operation without special training. Scrubber used for floor cleaning, mopping. Battery operated low noise for indoor use. Good efficiency at reasonable cost. Product confirms to all quality standards.

We have developed Engine Oil Cleaning and Disepnsing System. This system is suitable for Diesel Engine Manufacturers for cleaning Engine Assembly Line Test Bed Oil for cleaning and disepnesing oil to the engines. System consists of Centrifuge for Fine Filtration upto 1 Micron alongwith Spin On Type Cartridge Filter. System is completely digital electronic system and just by clicking a button, required quantity will be dispensed with accuracy of 0.1 Litre. · Customized for Engine Manufacturers · Oil Cleaning & Dispensing Unit · Complete Electronic Dispensing System with Digital Display · Oil Filtration by using Centrifuge for Finest Filtration down to 1 micron

Electrostatic Oil Cleaners are used for super cleaning of oil to NAS 1638 grade level. Efficiency of this machine to super clean the oil will be in the range of NAS 6-7. These machines are available with or without dehydration attachment. They work on high voltage laminar flow principle, catchhold magneticnon-magnetic ferrousnon-ferrous material. How it Works Electrostatic oil cleaner systems use electrostatic precipitation to remove sub-micron particle of insoluble material, without affecting soluble oil additives. Tiny particles are electrostatically driven to and captured on positively or negatively charged walls of electrodes. Large particles are trapped in the resin impregnated cellulose filter. Coalescing filter in dehydration cell is used for removal of moisturewater up to 5000 PPM. Modern additives-treated oil is highly resistant to deterioration; it can continue service indefinitely if kept clean and contamination free.

This System is designed specially for Reverse Air Baghouse Cleaning. The pick-up Vacuum Hose is very flexible and can be taken to inaccessible places of the RABH. This unit uses compressed air supply into a very powerful vacuum and material transferring system. This system can pick up and convey Powders, Plastic Pellets, Sand, Liquids and numerous other bulk materials. This can also be used for Pre-Coating of new bags. This is portable and can be easily used in large Systems.

We are into Manufacturing and Supplying of Central Vacuum Cleaning System that is well -acknowledged for its qualitative features in the domestic market. Central Vacuum Cleaning System is available in varied specifications to meet the demands of the clients. This Central Vacuum Cleaning System is also available with standard accessories. Important Features : Mobile vacuum producer unitModular designAuto Stop SystemEasy disposal of collected dustSafe to useEasy to installCentralized system Standard Accessories : PVC Flexible HoseRigid PVC extension pipeCrevice ToolFloor Tool on WheelsRound Brush

E-PAK is intended for extracting welding fumes, grinding dust, swarf, composite material, dust and particles. E-PAK can also be used as a central extraction unit and cleaning system for workstations and machines. Suitable for one to six simultaneous users depending on the application. Contact Nederman for information about our E-PAK that is suitable for explosive dust.  

To keep system Hydraulic Oil in superfine condition by removing contamination, like dirt, dust, sludge, and metallic particle. Since conventional system of Purification like centrifuge mechanical filtration has limitations and cannot remove particles below 5 microns, cost effectively.If system hydraulic oil is maintained in super clean condition 80 to 85% problems on hydraulic equipment are prevented. In turn it enhances life of the equipment and its accessories such as pump, valve etc. saves on oil replacement cost etc.

ECOMax-HE Automatic Tube Cleaning Syste

Transformer Oil Cleaning Systems, Stainless Steel Tool Bo

FILTER CLEANING SYSTEM, FLP Dust Collector, Double Skin Dust Collecto

Grain Pre-Cleaning System, Industrial Hopper, Grain Bucket Elevato