Industrial Valve Dealers in Sd Road, Secunderabad (109 products available)

DFPD is the new benchmark for quarter turn actuators. It can be used as an individual actuator or as part of a complete automated process valve system from Festo. With a torque range from 10 to 480 Nm, a rotation angle up to 180° and corrosion-resistant versions, the single- or double-acting DFPD is suitable for ball valves, butterfly valves or air dampers in the chemical, pharmaceutical and beverage industries, as well as for water treatment. Single-acting or double-acting Very compact Highly modular End position adjustable at both ends Optimised spring setting design For extreme temperatures: -50 … +150 °C Mounting plate for pilot valve in EU (G) and US version (NPT)

Hydraulic Valves & Directional Valves are 100% inspected, high and stable quality. These solenoid operated directional valves have high pressure, large volume, low noise, smooth switch over movement. Hydraulic Valves & Directional Valves consists of ISO standard measurements, high interchangeability and they are easy to install. Features of Hydraulic Valves & Directional Valves: Duo orifice designed, low resistance, high efficiency. Water & dust proof electric solenoid, high safety designed. Technical Specifications: Maximum operating pressure 315 kgf cm2 Rated flow capacity 63 LPM Maximum tank line back pressure 100 kgf cm2 Maximum frequencies of operation 240 C.P.M. (AC, DC) Filtration recommended 25 Micron or less Hydraulic fluids Mineral oil, recommendation temperature 0 ~ 55° C Max. Temperature range -25 ~ 90 °C Viscosity 10 ~ 400 CST

Valve Size : 3/4"

Brand Name : Yuken

Size : 3/4"BSP(F)

Model : BT 06

Pressure : 210 Bar

Port Size : 3/4"BSP

I deal in : New Only

Minimum Order Quantity : 1 Piece

Material : SS

Usage/Application : Industrial

Finished : Polished

Pressure : Medium Pressure

Condition : New

Material : Metal

Brand Name : Polyhydron

Pressure : 315 Bar

Valve Size : 1/4″BSP to 11/2″BSP

Media : Hydraulic OIl

Country of Origin : India

Brand Name : FESTO, PNEUMAX, UFLOW, TECHNO, SPAC, JANATICS, JELPC

Material : SS, BRASS, METAL, ETC

Media : Air

Type : Pneumatic Valves

Application : Air Fitting

Condition : New

Pneumatic BUTTERFLY VALVE, all sizes available, all brands available, Janatics, Festo, UFLOW, Pneumax, JELPC, Techno....................................................................................................

Type : Industrial Valves

Type : Valve

Packaging Type : High quality packing materials

Country of Origin : Secunderabad

Condition : New Good

Min. Order Quantity : As per client requirement

We make available fine variety of Industrial Valves which have impeccable make. Based in Secunderabad(India), We marked our presence in the nationwide market since our products are qualitative and cost effective. We are supported by an advanced packaging system and make use of only high quality packing materials for ensuring complete safety during handling, warehousing and transit.

We are proud to present you with the best quality Flush Bottom Ball Valve, from Hyderabad, Andhra Pradesh. We are one of the best suppliers, ready to procure products from reliable manufacturing houses. The design and construction of these valves match the standard regulations. The products are used in various industrial sectors. These valves are available in different sizes and dimensions.

We make available Industrial Valves in varying sizes, as per the customer requirements. As we want to maintain transparency in the dealings, we offer secure payment methods to the clients which can be either online or offline. The well-structured warehouse is the reason behind the safety and year around availability of the products we offer. Besides, we have installed modern amenities necessary for the safe storage of the lot.

Be cash payment or bank transfer, we are capable of making transactions using them all. Worry not! We have organized and maintained database to keep a stern check on the transactions made. We are supported by hi-tech machines and expert personnel that enable us in meeting the bulk packaging of the products. Moreover, we check the entire lot before making the final dispatch.   Features : Excellent finishing Excellent polishing Excellent design x

Material : Brass

Media : Gas

Model : Danfoss

Max Working Pressure : 522psi

Application : Industrial

Material Grade : 316L

Size : 40-100

Media : Water

Automation Grade : Manual

Steel Grade : 316L

End Connection Type : Flanged

Minimum Order Quantity : 1 Piece

Material : Carbon Steel

Condition : New

Weight : 10-15kg

Pressure : High

Feature : Durable

Quality : Best

Type : Gate Valves

Material : Alloy Steel, Carbon Steel, Forged Steel, Stainless Steel

Certification : ISI Certified, ISO 9001:2008 Certified

Application : Gas Fitting, Oil Fitting, Water Fitting

Weight : 10-15kg, 15-20kg, 20-25kg, 25-30kg, 30-35kg, 35-40kg, 40-45kg, 45-50kg, 5-10kg

Color : Black, Grey, Sky Blue, White

Condition : New, Used

Pressure : High, Low

Feature : Blow-Out-Proof, Casting Approved, Corrosion Proof, Durable, Good Quality, Investment Casting

Bronze Vertical Check Valve (Screwed) 1009   Salient Features    Screwed Female Ends to IS 554 / BS 21 / ISO 7.  Single Piece Design, Integral Seat.  Meant for Vertical Lines Only.  Permits flow in one direction and shuts automatically if the flow reverses.  Spring Loaded and ‘O’ Ring Type.  Also available with metal to metal seating. Test Pressure (Hydrostatic) Shell : 25 kg/cm²g (350 psig)  Seat : 16 kg/cm²g (225 psig) Maximum Working Temperature 80°C

Material : Brass

Connector Type : Screwed

Size/Dimension : 1/4" to 6"

End Connection Type : Screwed

Handle Type : Long Handle

Pack Type : Box

Feature : Disc open 80% to ensure positive closing and Neoprene, Buna-N, EPDM, Viton®, Silicon etc.

Design Standard : API 6D / API 594

Testing Standard : API 598

Pressure Class : 150# to 300#

ndianGlando Dual Plate, Wafer Check Valve has One Piece cast heavy stronger Body configuration provides reduced weight and size compare to a swing check valve or lift check valve. This results savings in Initial cost, space and pipe support element installation. The Dual Plate, Wafer Check Valve employs two-spring-loaded plates hinged on a central hinge pin. When the flow decreases, the plates close by the action of torsion spring before flow reversal takes place. All features put together make the Dual Plate Check Valve as the most efficient & versatile design. It is also referred to as SILENT CHECK VALVE It is much easier to install between standard gaskets and line flanges, and therefore is more cost effective to install and to maintain.

Material : Mild Steel

Voltage : 12, 24, 110, 220 V

Type : Spool, Pilot Operated

Usage/Application : Industrial

Valve Size : NG10 CETOP5

Model Name/Number : 4WE10

Brand : Rexroth

Pressure : 350 Bar

Media : Oil

Max. Flow : 80 LPM

Packaging Type : Box

Type : Metal Seat, Resilient Seat with or without Deflection Cones

Material : Cast Iron, Cast Carbon and Stainless Steel

Design Standard : MSS - SP -81

Rating : PN 6, PN 10, PN 16, 150#

Ends : Wafer, Two Lug, Lugged, Flanged to ANSI / BS / Din

Accessories : Chain Wheel, Gear or Pneumatic Actuator

Indian Single Cast, Rugged, Heavy Duty body provides corrosion and abrasion resistance on the toughest liquid slurry and dry material handling application. Indian High Performance Uni-Directional / Bi-Directional Knife Edge Gate Valve provide better value and performance with many standard features not found in other, commodity Knife Edge Gate Valve. Indian Knife Edge Gate Valves are available in different combination of Body, Seat & Gate material.  Machine ground ultra thick gate and lapped integral / renewable seat are designed to handle dense mixture of stock, and slurries.  A wide variety of hardened trim options are available on gate, seat ring and deflection cone to perform in critical services. Indian Knife Edge Gate Valves are full port design for greater flow capacity and minimal pressure drop.

Being a Supplier of Pvc Butterfly Valve, we continue in the same vein and keep enchanting our customers with our spotless quality. After giving tough competition to our contemporaries in Cyberabad(India), we have now come forth to challenge the providers in other markets.

Size : 1/2TO 4INCE

Brand Name : UNIVARSEL

Pressure : High Pressure

Material : SS 304/316

Connector Type : Flanged End

Number Of Holes : 4

Usage/Application : Industrial

Size : 15 mm to 300 mm

Features / Benefit : 100 % dielectrically spark tested suitable for vacuum service low maintenance cost absolute resistance to atmosphere & wear

Ansi Class / Rating : 150#

Design Standard : API 599

Testing Standard : API 598

F to F standard : ASME B 16.10

Materials : Body : WCB, CF8, CF8M, Hast Alloy, Super Duplex, Alloy 20 , LCB etc Plug , Stem : WCB, CF8, CF8M, Hast Alloy, Super Duplex, Alloy 20 , LCB etc Lining : PFA , FEP

Ends : Flanged End

Operation : Manual, Pneumatic, Electric

We are known as one of the prominent Angle Valves Manufacturers, Exporters and Suppliers from India. The Angle Valves are available with us in a wide range of specifications that is made in compliance with the set industry quality standards. These Angle Valves are high in quality and performance and very durable.

Our organization offering best pneumatic sleev valves supplying company.

Material : Cast Iron

Brand Name : Durga & Kartar

Color : Blue, Black

Size : 50 to 500 mm

Automation Grade : Manual

Pressure (psi) : 10 & 16 kg

Application : For water line

Minimum Order Quantity : 1 Piece

PRESSURE RELIEF VALVE TYPE:SPRING LOADED ANGLE TYPE DESIGN STANDARD:API RP563 MOC:S.S AND C.S SIZES UPTO 12" CONNECTIONS:FLANGED/SCREWED/BUTT-WELD/SOCKETWELD

Material : Brass

Pressure : Medium Pressure

Usage/Application : Air Conditioner

Valve Size : 4inch

Thickness : 7mm

We offer Pneumatic Valves. Pneumadyne’s direct acting pneumatic solenoid valves are a cost effective, space saving solution for the use of single or multiple valves. Our versatile offering features a variety of voltage, wattage, connector and mounting options to ease valve selection and installation. Fast response times and high flow rates make our valves suitable for numerous applications

water pipe valves, Air Valves, Industrial Valves, Mild Steel Pipes, Pipes

Material : Brass

Pressure : Medium Pressure

Brand Name : Danfoss