Grinding Mill Dealers in Odhav, Ahmedabad

Bead Mill is batch process equipment designed for optimum efficiency with very low energy requirement. Horizontal bead mills is used for coating, paint, printing, dye & pesticide manufacture. It is suitable for grinding and dispersion of medium viscosity products.

The Raymond grinding mill was ever popular in mining, building materials, chemical engineering and metallurgy industries for size reduction, dispersion, or specialized needs, powder generation and processing for industrial process. Now MTM series grinding mill has better performance than it.

Hammer Mill / Hammer Crusher / Lump Crusher;Hammer Mill works on the principle that most materials are crushed, shattered or ground upon heavy impact of hammers/beaters. The material is struck with grouped hammers which are attached to a shaft which rotates at high speed in the chamber. The material is crushed or shattered by the repeated impact of hammers, collisions with the chamber the walls of grinding chamber. Perforated heavy screens and bar grates covering the discharge opening allows the material to exit when it gets desired size, while keeping coarse particles in the chamber for further grinding.Features & Benefits Heavy Screen is attached with it so no further screening/sizing is required Available in MS, SS-304, Ss316 or combination of them material of construction. For Abrasive and Hard materials, High Manganese or any other hardened steel liners and hard faced hammers are provided for longer life of wear spares. Arrangement for easy replacement of Screen. Robust Construction & Lower Power Consumption.

Our organization is one of the trusted manufacturers and suppliers of industrial Ball Mills that comply with international standards. Ball mill capacity is 250 kg to 2500 kg.In this product range, we also offer shrouded ball mills that are extensively used in various industrial sectors for dispersion of enamels & primers, powder distempers and cement paints. Industrial ball mills made available by us are fabricated using quality-approved mild steel & stainless steel, and are used to grind materials into extremely fine powder. Owing to the quality and efficiency of our equipment, these find widespread demand for processing mineral dressing, paints, pyrotechnics and ceramics, among others. Our ball mills are perfect for dispersion of enamels and primers in the range of 25 kg to 5000 kg batch in both pebble and steel, with or without water cooling. Furthermore, the shrouded ball mills are especially designed & developed for powder distempers and cement paints. Owing to our expertise, we manufacture and supply a wide assortment of ball mills. Manufactured using high grade raw material as per the industry norms, these are highly admired by our clients. Due to their robust design, high tensile strength, trouble free operation and longer service life, these are widely used for various applications in diversified industrial & commercial sectors. Apart from this, these are available in various sizes and models as per the varied specifications provided by clients. The ball mill is very routinely used in varnish, distemper, paint industries, chemical industries. It is useful in matching colors, distemper paint etc. In bulk production.

A ball mill is primarily a cylindrical device used for grinding or mixing different material such as chemicals, raw material, ores and paints. It rotates around a horizontal axis that is partly filled with the material to be ground along with the medium of grinding. The ball Mill operates by rotating a cylinder with grinding balls like steel. These Ball Mill shells produce excellent grinding of slag and cement. This product is very easy to operate and gives reliable performance and having a large capacity to do the work perfectly. We export and supply Ball Mills in wide range to clients in reasonable price

We manufacture and export a wide range of cage mill. These high quality equipment, manufactured using high quality raw materials, are assured of greater longevity and immaculate performance. These are used to bring uniformity in the particles.

Colloid Mill Machine is suitable for Homogenizing, Emulsifying, Dispersing, Mixing , Comminuting of liquids to highly viscous products. It is based on rotor and stator principle. It’s available in plain as well as water jacketed model which is suitable for heat sensitive product. In your case as required the machine will be of water jacketed type.

We are backed by a well-structured and capacious storehouse that assists us in furnishing urgent and quick requirements of the clients. Moreover, we ensure complete safety of the stored items. Due to our commitment towards providing quality approved products to the clients, we source the raw materials only from the well-known and trusted vendors of the market. GMP Model Suitable for Homogenizing, Emulsifying Dispensing, Mixing, Commuting of liquids to highly viscous products Jacketed (Optional) It is based on rotor-stator principle Particle size reduction 5 to 10 micron Output-120 to 12000 Kg./shift 3.0 HP 440 volts Motor

We offer our clients a wide range of Alkyd Resin Plants. Based on our vast experience, we have been able to comprehend the minutest needs of our clients. Our constant endeavors to offer our clients with best services and products have been appreciated by our clients and helped us in building a positive brand image. We provide assistance to our clients in making the correct choice based on their budget and attempt to meet their requirements on time. Our professional attitude and valuable and efficient services have helped us garner a wide client.Bead Mill is batch process equipment designed for optimum efficiency with very low energy requirement. Horizontal bead mills is used for coating, paint, printing, dye & pesticide manufacture. It is suitable for grinding and dispersion of medium viscosity products.

The colloid mill is suitable for cutting down the particle size of a solid or liquid suspended in a liquid. Equipped with hydraulic shear, the colloid mill machine is widely used for creating particles of same size, dispersing, mixing of materials. The colloidal machine has found its wide usage in industries including food & beverages, pharmaceutical, suspensions & emulsion, cosmetics and more. The colloid mill machinery involves stator and rotor in the cylindrical vessels to do shearing for reducing the material size. Working Principle: The material to be reduced enters the colloidal mill through its inlet hopper. It then passes through the gap created between the rotor and stator. The mill then cuts down the size of the material to the desired level. The process requires the inclusion of heavy liquid to start the shearing process. During the milling process, both the materials are stirred at a high rate while the processed material starts draining out of the outlet. If required, the process can be repeated through its re-circulating pipe assembly.   Salient Features: The machine works on cGMP model. The machine assembly is made of stainless steel. Compact and rugged structure. Equipped with jacketed stator housing with stainless steel connections. The motors are explosion proof. All the machine contact parts are composed of SS304 / SS316 / SS316 L quality material. Provided with DOL starter with overload relay to protect against single phase line and low voltage.

Our organization is one of the trusted Manufacturers and Suppliers of industrial Ball Mills that comply with international standards. In the range of our Ball Mills, we also offer shrouded Ball Mills that are extensively used for dispersion of enamels & primers, powder distempers and cement paints. Industrial Ball Mills made available by us are fabricated using quality-approved mild steel & stainless steel, and are used to grind materials into extremely fine powder.

 Pug mixer inner walls are constructed of SS or MS sheets. The mixer consists of a centre shaft of appropriate diameter and is either made of S.S or M.S materiaI. The centre shaft is fitted with specially designed agitator blades in order to provide contraflow action. Contraflow ensures constant circulation of mix/blend ingredients from one end to another to homogenise the batch.  Both the ends of the vessel are provided with stuffing boxes on the shaft. Blend ingredients are prevented from leaking and entering into bearings by the stuffing box. The shaft is supported by heavy duty pedestals. For models below 300 kgs the unit is provided with a pulley drive system along with tilting arrangement for discharge.    For models above 300 kgs the unit is provided with a gearbox drive coupled to a motor and the discharge valve provided at the bottom

The Hammer Crusher/Disintegrator is widely used in the industry of mining, building materials, chemical industry, metallurgies and fodder. The Hammer Crusher/Disintegrator can secondary and fine crush materials in middle or less than middle hardness such as barite, limestone, terrazzo, silica and stone, coal, coke, gypsum, aluminum sulfate, slag, etc. Features And Benefits Able to produce a wide range of particle sizes. work with any friable material and fiber. Ease of use. Lower initial investment. Minimal maintenance needed.

COLLOID MILL is suitable for homogenizing emulsifying dispersing, mixing, comminuting of liquids to highly viscous products. It is based on rotor stator principle, It is avail OPERATIONS:- Product is feed to the operating areas of a rotor, having a speed of 3000 R.P.M by specially designed feed device. The product is processed by high sheer, pressure and friction between the stator and rotor , the angular gap becomes narrower towards the discharges section. This processed product continuously leaves the mill through the drain pipe, if required, it can be re circulated SALIENT FEATURES : All contact parts are made out of S.S. 304 (S.S. 316 on demand at extra cost). No castings are used to avoid contamination problems. • 2 Coupling provided between motor shaft and rotor shaft for ease in maintenance. 3 Three leak proof neoprene sealing device between the motor and the processing chamber to prevent liquid going in the motor winding. 4 Modified design of semi concave teeth in rotor and stator reduces motor h.p. and gives better performance in size reduction without damaging the products. 5 Extended bearing housing specially designed to facilitate fine metal contact of rotor and stator. 6 This unique design provides smooth and consistence all around performance and long life of rotor and stator. 7 Three way cock system for draining and recirculation of the liquids provided as standard. 8 Extra discharge sprout provided as a standard for viscous products. 9 DOL starter with overload relay for protection against single phasing and low voltage. 10 Contact parts can be easily dismantled for cleaning.

Colloid mill machine is a perfect homogenizer cum emulsifier and can be used for various pharmaceutical applications like homogenizing, emulsifying, dispersing, grinding, mixing and extracting. Since decades, we are catering the needs of various industries by reflecting the quality and workmanship of our professional engineers. Colliod mill is ideal for small, medium and large scale tablet batching systems.

A colloid mill is a machine that is used to reduce the particle size of a solid in suspension in a liquid, or to reduce the droplet size of a liquid suspended in another liquid. This is done by applying high levels of hydraulic shear to the process liquid. It is frequently used to increase the stability of suspensions and emulsions. The colloid mill is used for various applications such as Superfine grinding, homogenizing, emulsifying, dispersing, mixing and extracting of liquids, ointments and highly viscous products in pharmaceutical, cosmetics, suspensions & emulsion industry. The product is fed to the hopper which leads the product into the gap between rotor and stator. The product is subjected to a high degree of shearing, cutting and rubbing between two metal toothed surfaces of rotor and stator and towards the discharge section. The processed product continuously leaves the mill through drain pipe if required, it can be re-circulated by three way cock and re-circulating pipe assembly. SALIENT FEATURES : Design is cGMP - Current Good Manufacturing Practices compliance. All contact parts AISI 316 & non contact parts AISI 304. Easy to adjustment gap between rotor and stator. Three way cock assembly with re-circulating pipe. Easy to Moveable and dismantle all contact parts for cleaning. Silicon food grade seal. Separate discharge spout for highly viscous products. OPTIONAL FEATURES : Horizontal / Vertical Drive. Water cooling system. Flame Proof Electrical. SAFETY FEATURES : Overload pressure release mechanism.