Testing Equipment Dealers in Ambawadi, Ahmedabad (64 products available)

FEATURES   => State of Art Microcontroller Based Design.=> Built in Solid state selector switch for phase selection=> Super bright LED display for crystal clear long distance day light viewing=> Built in Transducer=> True RMS measurement

This Instrument is in according to ASTM D 1238, BS, DIN ,ISO,IS (Indian Standard) or according to customer’s required specification Temperature range up to 400°c with accuracy ±1°c. Resolution 0.1°c PID based temperature controller with auto-tune facility Timer: Digital timer Range up to 999.9 min/ 999.9 sec., Having preset facility and buzzer output Applied weight manual

To apply Screw measure cap on PlasticGlass capped bottles with the specified torque Cap diameter:- 20 mm to 50mm Cap Height :- 12 mm to 30mm Bottle diameter:- 30mm to 80mm Bottle Height:- 30mm to 150mm

We present a wide range of quality vision testing equipment that are in sync with international quality standards. The lenses used in these equipment are strictly examined and checked under auto lensometer. Moreover, best quality of aluminum rims are used to provide long lasting features to our range. We offer these equipment in proper packaging to protect them from any damage during the transit. Our vision testing equipment are made from highest standard of raw materials and these vision testing equipment conform to defined industrial benchmarks. We also implement stringent quality testing to ensure that these vision testing equipment are free from any kind of defects.

Purpose of list Water absorptiveness of paper board or other materials is a function of various characteristics such as sizing, porosity, etc. The Gurley-Cobb sizing test can be used to test absorption or resistance to absorption of water, oil and other liquids. Principle This procedure determines the quantity of water absorbed by a sample of paper or other sheet material in a specified time and under standardized conditions. Other liquids such as ink, beverages, oil and water based solutions may be used instead of water. The standard area is one hundred square centimeters (cm2), into which 100cc of liquid are poured to reach a specific height of 1 cm. For smaller samples, proportionately smaller areas (25 and 10 cm2) can be tested. Description The Gurley-Cobb Sizing Tester consists of a hollow metal cylinder or ring (100, 25 or 10 cm2 inside area); a metal base plate with a clamping device to hold the ring against the sample and a Neoprene mat. Neoprene gaskets also are supplied to seal off the cylinder when testing uneven materials where an ungasketed seal is difficult to maintain. A critical component of this test is a solid stainless steel roller having a smooth face 20cm wide and weighing 10.0+ 0.5kg. Also required for the test are a 100ml graduated cylinder, a balance with sensitivity of 0.01g or better, blotting paper and a timer or stopwatch.

We are offering Complete range of bitumen testing instruments as per following Marshall stability test apparatus Automatic marshall compactor Rolling thin film oven Rotational viscometer Skid resistance tester Ductility testing machine (Without refrigeration) Ductility testing machine with Refrigeration System Fully automatic penetrometer Low temperature waterbath Core drilling machine Mastic Asphalt Hardness Tester Flameproof bitumen extractor Planetary Mixer Petroleum distillation apparatus Distilllation apparatus as Muffle furnace Hot air oven - CE Marked Loss on heating test oven Softening point apparatus Saybolt viscometer Cleaveland flash and fire point apparatus Pensky marten flash point apparatus Benkleman Beam apparatus Density of semi solid bituminous material Marshall Rammer Ductility moulds Camber board Pycnometer bottle Aspirator pumps

Festures: Display 3 1/2 digits Large LCD with LOBAT Indication Resistance range upto 2000 M OHM in two ranges of 200 M OHM Selectable test voltage 500V / 1000V DC Rechargeable Ni-cad battery operated Shock and dust proff ABS Casing Automatic Zero Adjustment

Selectable units of measurement like Kilopond (kp), Newton (N), Pound (lb or lbm), Strong Cobb (SC), Statistical Data for the Maximum, Minimum & Mean Values are printed for the Tablet Tested at the End of the Test IQOQ Documents.

Slump Test Apparatus ( AIM 334) Ref Stds :IS:7320, BS:1881, ASTM C 143, AASHTO T119   The slump cone is filled with freshly mixed concrete and is tamped with a tamping bar in four layers. The top of  he concrete is levelled off with the top of the slump cone,  he cone is lifted vertically up and the slump of the sample  simmediately measured.   Application Consistency Test,Workability determination of concrete mixes. Industry Civil Infrastructure Cement/RMC Construction Chemicals Dams & Tunnels Fly Ash Irrigation Railways Sleepers Real Estate Refractories Roads, Highways & Bridges Education Architecture Building Technology Civil Department Geotechnical Science Colleges Metal & Material Tiles & Ceramics Special Applications Fly Ash Traffic & Transportation Railways Roads, Highways & Bridges

Used for the measurement of resistance to plastic flow of cylindrical specimens of bituminous paving mixtures when tested in a marshal load frame. Test specimens are produced and tested at a speed of 50.8mm/min.The maximum load(stability) and deformation(flow) of the specimen are recorded. Generally the test is applicable to hot mix designs using bitumen and aggregate of maximum size of 25mm. Widely used for designing and evaluating bituminous paving mixes. General Descripation & Specifications The apparatus consist of the following Load Frame A floor standing compression loading frame of 50 KN capacity with motor and worm gear housed within the base unit, producing a platen speed of 50.8mm/min. Limit switches are provided to cut out the platen over run on the downward travel. A handle is provided for manual operation during calibration etc. The load frame is fitted with ON/OFF/Reversing switch and power indicator lamp in front. Suitable to work on 230V, 50 Hz, AC single phase. . Marshal Moulds (3 Nos.) 4”dia X 3” height specimen moulds, base plates and Extension collar. Manufactured from steel.(6“ dia mould can be supplied at extra cost) Compaction Pedestal Comprising of a hard wood block with a steel plate, complete with specimen holder, semi circular base and a circular top to hold 4” dia specimen mould in place during compaction of the specimen. (Pedestal to accommodate 6” dia specimen can be supplied at extra cost) Compaction Hammer (2 Nos.) Designed for use with the compaction pedestal and mould. The hammer has a falling weight of 4.535 kg and free fall of 457 mm. Breaking Head Assembly Consisting of upper and lower cylindrical segments with provision for fixing flow meter. Suitable to take 4” dia specimens. ( Assembly to accommodate 6” dia specimen can be supplied at extra cost) Specimen Extractor Consisting of a load transfer bar, pressure plate and steel ball Optional Accessories The following accessories and consumables are not part of the standard supply and are mandatory for the testing work Proving Ring of 30 KN capacity with calibration certificate with traceability. Flow meter Dial Gauge with 0.01mm graduation and 25mm travel. Water bath with Thermostatic or Digital Control with stirrer Electronic Balance of capacity 5 kg/1gm or 2 kg/0.1 gm or Two Pan Balance with set of weights and analytical weight box. Pair of Asbestos Gloves Filter Paper ( Pack of 100 ) Misc. items: Spatula, Scoop, Mixing Tray, Trowel, light mineral oil and Benzene. The following additional Instruments will speed up the testing process with ease and accuracy Sample Extractor allows the marshal sample to be easily removed from the mould. Can also be used for Proctor Moulds and Core cutters. Optional Accessories The following accessories and consumables are not part of the standard supply and are mandatory for the testing work

• Type: Digital Gloss Meter
• Rated Power: Battery operated.
• Incident angle: 60°
• Indication error: ± 1.2 GU
• Reading Range: GU 0.0
• Readability: 0.1
• Dimensions: 123mm (L) x 38mm (W) x 65mm (H)

Applications Measurement of the surface gloss of paint, powder coating, marble, granite, plastic, woodenware, paper and ceramic, metallic coatings Salient Features   The light source needs no replacing forever. A full-scale charged low consumption AA battery works more than 24 hours. The instrument is absolutely portable .

Features: Hassle free functioning Corrosion resistance Accurate outcome Easy to use  Compliance with following International Standards IP 124, ASTM D665, ASTM D3603   Brief construction details Rectangular reservoir (Inner chamber) constructed of 16 SWG, stainless steel with drain cock. Outer body made of 20 SWG, CRCA sheet duly powder coated. Thermal insulation provided in between the walls to prevent loss of temperature. Constant temperature oil bath is fitted with motorized stirrer  to maintain temperature at 60 °C ± 0.5 °C Oil immersion heaters are fitted to dissipate uniform heating. Temperature, speed and time are digitally indicated. Microprocessor based PID temperature controller with two  displays for set and process value. PT-100 sensor with 0.1 °C resolution on digital display. The bath can accommodate at least four test samples at a time with combined motor for each position Motor is mounted on ball bearing, driven by belts and pulleys. Supplied complete with 4 Nos test Beaker (400 ml) of Borosilicate glass with dimension as per ASTM standard. The test beakers are securely held in the bath by spring clips and are fitted with acrylic covers, dimension as per ASTM standard.   Details about Timer & Stirrer The unit is having motorized stirrer with digital RPM meter with proximity sensor to monitor the stirring speed. Stirrer rotates on its longitudinal axis at 1000 ± 50 rpm. Stirrer will be made of stainless steel as pr standard dimension given in the method. Test rod is also made of steel conforming to grade 10180 of specs A 108 BS 970 Part 1:1983-070M20 with dimension as per standard. In-built timer is provided in apparatus which stops the stirrer at pre-set time.   Technical Specifications Temperature range    : Ambient to 100 °C  ± 0.5 °C Stirrer Speed            : Up to 1000 rpm, ± 50 revolution/minute Power supply           : 230 Volt + 10 %, 1 phase, 50 Hz   Following accessories are supplied along with the equipment 1)    Thermometer ASTM 9C, ASTM 20C & ASTM 21C (1 each)  :  3 numbers 2)    Steel Test Specimen                                  : 4 numbers 3)    Test Beakers (400ml) with covers           :4 numbers 4)    Beaker cover (PTFE) for ASTM D665      : 4 Numbers 5)    Teflon holder (PTFE) for D665                 :4Numbers 6)    Auxiliary Stirrer Blade for ASTM D665 Procedure C (heavier than water fluids)  : 1 Number

Manufacturers & Exporters of Conduit Bending Tester Conduit Bending Tester is used to check whether the sample withstands Bending load. This is one of the mechanical properties which need to be checked for the stress likely to occur during Installation etc. as per the given standard. Specification : Pipe Clamping Device to Test Bending Test for 20mm, 25mm, 32mm & 40mm pipe dia. Bending Rollers for 20mm, 25mm, 32mm & 40mm pipe dia.

• Model Name/Number: DRA
• Packaging Type: Wooden Box 
• Brand: Frontline
• Usage: Laboratory
• Driven Type: Electric
• Stroke: 50mm. Approx. 30 strokes/min
• Setting: Digital
• Heater: 500 watts stainless steel
• Temperature: Amb. To 45. 0C,
• Temp. Controller: Digital with pt-100 sensor
• Timer: Microprocessor based digital 00. 01 to 99. 99hrs.
• Overall dimension: 375 w x350d x550 mm h
• Accuracy: + 0. 50C

We are chiefly involved in manufacturing and supplying a wide array of textile testing equipments that comply with the global standards of quality. These include instruments of Processing and dyes testing, Fabric testing instruments and Standard sample testing etc.Our products reflect our meticulous effort of quality maintenance as well as awareness & inclusion of the contemporary production methodology and techniques. These instruments and equipment are known to offer very accurate results as these are produced maintaining their quality in compliance to the international standards. These are quality tested and verified by our quality experts in every aspect to ensure our clients get supreme performance with no flaws. Our products have great demand in the domestic market and are highly chosen for their reliability as well as affordability.

• Material: Stainless Steel
• Country of Origin: Made in India
• Specialities: Easy to use, Portable, Unmatched quality

NTPL is devoted towards providing superior quality products that are customized according to the specific requirements of clients. With the introduction of ISO system, occurrences of defects in production are prevented and as a result TQM standards are followed. This also enables quality improvement at controlled costs of production that in turn facilitates competitive pricing. Quality of our products and production process is our primary concern, which has been the driving force behind our rapid growth. We conduct numerous quality checking procedures and audits right from material acquisition to packing. It is our endeavour to create a culture of Total Quality where continuous improvement of our people, our processes and our products become a way of life. With our "Vardhman-BROCKHAUS Magnetic Material Testing Laboratory" we assure quality with commitment. Navkar Transcore has already applied for NABL Approval which will be one of its kinds in Transformer Lamination Industry. Click to zoom... Navkar Transcore Magnetic Material Testing Laboratory Single Sheet Tester Ring Core Tester Epstein Tester Franklin Insulation Resistance Testing Machine Various measures are being taken to ensure the quality of incoming and outgoing materials till up to finished lamination or core and their packaging. It is also assured that all the measuring instruments used for quality checks are approved by the Govt. recognized Agency to ensure accuracy and exactness. In addition to our quality material supply, the Cut to length line installed at our plant also provides the added benefits of precise core cutting, core losses as well as reduction of noise level up to 15%

• Type: Disintegration Tester
• Displacement: 55mm
• Power: AC/230 volt Single Phase
• Drive: 1/8 HP
• Heater: 125 watt.

• Power Source: Battery
• Weight: 34 G
• Operating Temperature: -20 to +70 DegreeC
• Dimension: 60 x 38 x 18.5 mm

We are engaged in supplying of data logger

Data Loggers, Alarm Annunciators, Electrical Instruments

Pulse meter, monitor, disposable item, Hand Gloves

Spark Tester, electronic test equipment

Food Testing Laboratory equipments

Ring Core Tester, Shunt Reactor

We are well known for supplying of wide variety of Pressure recorders.

Titmus T2c-Vt3 Vision Tester, Automated Perimeter, vision screener

MATERIAL TESTING INSTRUMENTS, Analytical Instrument

environmental water testing equipment, Micro Pipettes, lal test