Testing Equipment Dealers in Ctm, Ahmedabad

We are primarily engaged in manufacturing, exporting, importing and supplying the highest grade Fire Fighting Water Valves Tester all over the world. Our Fire Fighting Water Valves Tester is precisely engineered by the expert engineers with the help of latest technology. The Fire Fighting Water Valves Tester is available at reasonable prices. Description Twin station to test 4 nos. Valves together Attributes Easy maintenanceDurablePrecise engineeringSturdy constructionOptimum performanceLong service life

We are offering digital soil moisture meter. Introduction; digital soil moisture meter is light and portable battery operated instruments specifically designed for agricultural application for measurement of soil moisture directly in % saturation. Application: * agricultural field. * soil testing. * soil & water management application. * other research application. Salient features: * light weight. * field usable. * battery operated. * digital display calibrated in %. * specially designed electrode. * easy operation. * solid state electronic circuit. General specification the digital soil moisture meter is battery operated portable and light weight instrument calibrated in % saturation in soil and reads from 0 to 100%. Technical specification: *range - 0-100% saturation. *accuracy - +-0.5%. *electrode size - 15cm. *display - lcd digital. *power - 9v battery. Accessories : *moisture sensors of other depth available – 30cm depth & 50cm depth.

The benz pipe burst tester tests pipe, tube and hose from 18" to 12.0", measuring burst pressure up to 3000 psi. Custom burst pipe testers can measure higher pressures and larger diameter samples.

Standard ASTM 3786 Suitable for Fabric/Paper/Leather & LDPE/HDPE Products & Corrugated Boxes Equipped with Microprocessor Based LCD Display Controller Suitable to test sample upto 60kg/cm² Displays Resolution of 0.1 or 0.01 kg/cm² Digital Indication for accurate reading Controller having Facility to Adjust Unit Selection viz Kg/Sq.cm,Bar,PSI,KPa & MPa Stores data upto last Ten readings & gives Average Value, Max. Value & Min. Value of the Tests Facility to perform batch testing up to 10 test and record data in memory Quick,Easy, Accurate & User Friendly Operation- As M/c. Stops automatically on completion of the test and also having Auto Reverse facility. The machine is equipped with 1/4th H.P.Geared Ele. Motor. Also Equipped with Variable Speed Drive to control flow of Hydraulic Fluid

For the convenience of the clients, we have adopted both online and offline payment modes of transaction. In addition to this, we guarantee transparency and confidentiality in both. To ensure maximum quality retention, we package our products in industrial-grade packaging materials that can brave mechanical damages and logistical jostling. Additionally, they are labeled to impart product information.   USP HEXA PLAST provides impact tester for different plastic films, sheets, decorative laminates, corrugated roofing sheets etc. with range of Darts & selectable facility of height of fall with low efforts. HEXA PLAST provides two different Electromagnetic system for light & heavy dart respectively which would help in selection of dart with smallest possible dart to heaviest one. HEXA PLAST gives high – tech vacuum pump with gauge and clamping system to clamp the film tightly. We also provides Digital Counter for counting Number.

Plastic Testing Instrument, Rotary Shaker, Measuring Equipmen

We offer one of the most significant Fabric Testing Instrumentscalled Crock meter. Crock meter is used to evaluate the discolored area for the dyed material by abrasion method. It is used for Fabric Testing as well as Leather Testing.  There are two types of Fabric Testing Instrument that we cater to our consumers.  Motorized crock meter and Manual crock meter, both are used for the same purpose and delivers accurate results. MOTORIZED CROCK METER: In Motorized Crock Meter hammer is coated with a cotton cloth, you can use dry or wet cotton cloth.  This hammer is used repeatedly to scrap the sample fixed on the testing table. The process is repeated 10 times in 10 second to inspect the firmness of color dyeing.

Reference standards- ASTM-1238, ISO-1133, IS-2530 Method- A- A System status- Digital Temperature controller- Micro processor based double display PID controller Temperature range- Ambient to 300°C Temperature resolution- 0.1°C Accuracy- ± 0.1°C Timer range- 0 - 999 second

"Surya" Melt Flow Index Tester is designed for measuring "Melt Flow Rate' with high accuracy and being used for quality control test on flow ability, grading of thermoplastic materials according to flow. It is designed to calculate accurate rate of extrusion of molten resin through an orifice of specified temperature and pressure. Standard equipment includes all operating tools, piston and dies, Integrated microprocessor based PID temperature controller for a temperature range of 0-350 Deg.C with time facilities,Resolution as 999.9 sec

Machine is designed to check eccentricity and taper of all kinds of top rollers like R/F, S/F, Draw Frame, Comber etc. Manually operated for checking eccentricity and taper of top roller at any point with two Dial indicator which are fitted on adjustable stand to adjust height and width wise.Net/Gross weight: 60/100 kgs.Size of cage: 75L * 40W * 60H cms.

The tank has been designed to accommodate 150mm/70.6mm cube moulds upto 36/72 cube mould and fully insulated, complete with a hinged lid, heater, thermostat and re-circulated pump. Provision of two removable racks allowing free circulation of water around each mould. The pump, drain valves and electrical equipment are housed in a compartment located at one end of the tank. The Tank is heated by a immersion heater under normal conditions and refrigeration system for grey cement the temperature is controlled at 35oC or 100oC ± 2oC / 27oC +2oC , expect for the 15 minutes after immersion of the freshly made specimens. Curing Tank for 6/12 moulds of 150mm / 70.6mm size Curing Tank for 12/24 moulds of 150mm / 70.6mm size Curing Tank for 24/48 moulds of 150mm / 70.6mm size Curing Tank for 36/72 moulds of 150mm / 70.6mm size

We produce a wide gamut of Test Chambers For Pharma Industry.Test Chambers we manufacture are designed for extreme durability with its robust construction and state-of-the-art manufacturing processes. They can be customized to meet the specific operational needs of our customers.Features:» High functionality» User friendly» Extremely durable» High on accuracy

    Introduction The strength of concrete is generally estimated after 28 days by crushing field test cubes or cylinders made from the representative concrete used for the structure. The utility of ascertaining strength after 28 days is often questioned since by this time considerable concrete would have been placed and work may have progressed. It is then rather too late for remedial measures. It is therefore of tremendous advantage to predict 28 days strength within a few hours of casting the concrete so that, we have a good idea about the strength of the concrete.   The rate of gain of strength of concrete depends on the reaction rate of cement and additions with water (Hydration). In common with all chemical reactions, the rate of reaction depends on reaction of temp. Higher reaction temperature gives higher rate of reaction e.g. the concrete gains strength more rapidly when its temp. is higher. Accelerated curing is the process by which the temperature of the concrete is raised artificially by applying external heat to speed up the rate of gain in strength.   The test method covers procedures for curing test specimens of concrete stored under conditions intended to accelerate the development of strength. The procedures are: Procedure A- Warm Water Method, Procedure B-Boiling Water Method   General Description & Specification: Accelerated Curing Tank having capacity to accommodate 6/12/18 Concrete Cubes of 150mm size with a facility for accelerated curing by Boiling water method up to temperature range : 100 +/- 2 deg.C as per IS standard IS : 9013. Also it will have capacity for curing by warm water method at temperature 55 +/- 2 deg.C   Tank will consist of a rectangular double walled metal cabinet, inside lined with stainless steel, outer powder coated. Easily replaceable high Wattage heaters are mounted in side the chamber. A slow speed stirrer is provided to circulate water inside the chamber to maintain the uniform temperature of water. A strong stainless steel perforated platform is provided for keeping the cubes and also have a lid with lifting handle to cover the chamber.   The temperature is indicated and controlled by a DIGITAL auto tuning PID Temp. Controller with soak timer to control the duration of heating and then to shut down the system without manual attendance. The front panel will have power supply indicating lamp, control action indication lamp and one main switch. Suitable for operation on 220 V, 50 Hz single phase, AC supply or 440 V 50 Hz, three phase AC supply, for bigger size of curing tank.   Optional Accessories Rubber hand Gloves. Spare Heaters. Low water Level cut off device to safeguard heaters against low water level burn out In built refrigeration system for curing at 27 deg C   Recommended Accessories & Consumbles The following accessories and consumables are not part of the standard supply and are mandatory for the testing work     Also Available   Accelerated Curing Autoclave : By Steam Pressure   Accelerated Curing Drier : By Dry Heat