Civil Engineering Test Equipment Dealers in Karol Bagh, Delhi (34 products available)

Owing to our rich industry experience and knowledge in this domain, we have become an eminent Double Ring Soil Infiltrometer manufacturer, supplier and exporter. This laboratory instrument is widely used to determine the infiltration rate of water into the soil and the rate is determinate as the amount of water per surface area and time unit that penetrates the soils. Our well equipped infrastructure unit helps us to ensure prompt and hassle-free production of this Double Ring Soil Infiltrometer.

As a prominent Concrete Permeability Apparatus Manufacturer, Exporter and Supplier, we offer a range of highly efficient Concrete Testing Equipment. One of the indispensable characteristics of Concrete Permeability Apparatus is to determine the permeability of water through specimen. Our Concrete Permeability Apparatus is highly efficient in defining the permeability of cement mortar and concrete specimens of 15cm cubes casted in the laboratory. Specifications The Concrete Permeability Apparatus that we offer comprises of a brass/gunmetal cell of square/round cross-section mounted on a stand. A pressure chamber is attached to the cell through copper tubing and T-connector is mounted on the stand with sleeve packed valve and rubber hose pipe with end connections. The cell assembly consists of a base plate, a metal funnel and a top plate. The pressure chamber is fitted with a pressure regulator, which helps to regulate the pressure from 0-15kg/cm sq. gauge for indicating the pressure in the cell. A foot pump and a pressure tube are supplied to improve the pressure of the chamber. The apparatus is supplied with a measuring cylinder of 500cc to measure percolated quantity to water. We also offer Single Cell Concrete Permeability Apparatus and Three Cell Models Concrete Permeability Apparatus.

• Material: Steel, Granite
• Size: 38 mm
• Resolution: 0.001 mm

• Material: Cast Iron
• Application: Concrete Testing
• Voltage: 220V
• Automation Grade: Semi-Automatic
• Brand Name: Steco
• Power: 0.25 To 2 Kw
• Standard: BS 1881-103, BS 5075
• Frequency: 50/60 Hz

Other Details: The compaction factor is defined as the ratio of the mass of the concrete compacted in the compaction factor apparatus to the mass of the fully compacted concrete. It involves dropping a volume of concrete from one hopper to another and measuring the volume of concrete in the final hopper to that of a fully compacted volume. The results of the compaction factor test can be correlated to slump, although the relationship is not linear. This test is difficult to run in the field and is not practical for large aggregates (over 1 inch) Compared to the slump test, the apparatus is bulky and a balance is required to perform measurements. The apparatus, consist of a rigid frame that supports two conical hoppers vertically aligned above each other and mounted above a cylinder. The top hopper is slightly larger than the bottom hopper, while the cylinder is smaller in volume than both hoppers. To perform the test, the top hopper is filled with concrete but not compacted. The door on the bottom of the top hopper is opened and the concrete is allowed to drop into the lower hopper. Once all of the concrete has fallen from the top hopper, the door on the lower hopper is opened to allow the concrete to fall to the bottom cylinder. The excess concrete is carefully struck off the top of the cylinder and the mass of the concrete in the cylinder is recorded. This mass is compared to the mass of fully compacted concrete in the same cylinder achieved with hand rodding or vibration. Complete with trowel and tamping bar 0-60 cms long X 16mm dia. Optional Accessories: Concrete Scoop Straight Edge Weighing Balance

We are the best provider of Sand Pouring Cylinder used in determining the density of soil. These cylinders are devised using high quality metal components and anti corrosive materials. They are also provided in customized size and thickness to meet diverse client requirements. These products are highly durable, accurately designed and provided to various construction sectors across the nation.   Features : High quality Best performance Economical range   Descriptions : Sand Pouring Cylinder is used to measure density of fine, medium, coarse grained soil. 100mm - 115 mm internal dia with conical fun net and shutter. Calibrating Container 100mm deep with flange 50 mm wide. Matal tray 300mm square x 40mm deep with 100mm dia hole at the centre. 150mm - Used to measure in situ density of fine, medium, coarse grained soil. Cylinder with 15500 dia and length 450 mm cylinder container metal tray hole in the center. 200mm - Sand Pouring Cylinder, 215 mm internal dia. with conical funnel and shutter calibrating container 200mm inner dia x 250 mm high with 75 mm wide flange. Metal tray 450mm square x 50 mm deep with a 200 dia hole at the centre.

Used to determine the strength values of a rock specimen both in the field and in the laboratory. It consists of a load frame for applying loads up to 55 KN, on which a manual hydraulic jack is mounted. The instrument accepts core specimens up to 4” (101,6 mm) diameter which are loaded by two coneshaped points. A graduated scale indicates the distance between the conical points. The applied load is measured by a pressure transducer with a digital display unit range 0-56kN, 65.000 divisions, 0,001 kN resolution, accuracy: ± 1%. The strength index (IS) is got by the formula P : D2 where P is the strength and D the space between the two conical points.Accessories: EKE 206-DG 001 Set of Hardened Conical Cone EKE 206-DG 003 Lower Plate and Upper Plate with seat ball to modify the Point Load Tester into a portable compression test- Technical Specifications Model Number : EKE 206-DG Dimension : 400x530x720 mm. Weight : 25 Kg

We are engaged in designing Marshall Stability Test Apparatus since 8 years and have established our name among the leading Manufacturers, Suppliers and Exporters of Marshall Stability Test Apparatus from Delhi, India. Marshall Stability Test Apparatus is extensively used for measuring the resistance to plastic flow of cylindrical specimen of bituminous pouring mixture loaded on the lateral surface. Our offered apparatus is highly robust and is suitable for handling hot mixture containing tar or asphalt.   The Apparatus Consists of : A loading unit motorized capacity 50 KN with two telescopic pillars and an adjustable cross head. Limit switches are fitted inside to control upward or downward movement of the pillars. On-off reversing switch and indicator lamps are on the front side while a hand wheel to manually move the pillars is on the right. The load frame has fixed speed of 50.8 mm per minute. Operated on 230 Volts A.C. Compaction pedestal with specimen mould holder- 1 No. Compaction Rammers, 4.5 kg weight and free fall 45.7 cm.- 2 Nos. Breaking head assembly with provision to fix flow meter.- 1 No Specimen mould 10.16cm ID x 7.6 cm high with base plate and extension collar- 3 Nos 6Kit for specimen extraction, consists of one each load transfer bar, steel ball, specimen extracting Plate- 1 No

Our company is premium Manufacturer, Supplier and Exporter of Flexure Testing Machine from Delhi, India. The Flexure Testing Machine offered by us is in compliance with norms set by industrial regulatory bodies. Our machine is tested on stringent quality parameters to ensure that clients receive a defect free product. Customers can acquire small and bulk orders of Flexure Testing Machine from us at highly affordable rates. Features : Light weight, rugged high strength frame Double action hydraulic pump Self-aligning roller assembly Hydraulic jack provided with retraction spring For testing beams of 100x100x500mm and 150x150x700m Conforms to IS:516, BS:1881 AND ASTM C78   Models available : EKE 331 100kN Flexure Testing Machine with double action pumping unit manually operated. EKE 332 100kN Flexure Testing Machine with Electrically operated Pumping Unit, fitted with 1 H.P. motor, suitable for operation on 415 V. 3 phase A.C. Supply

• Condition: New
• Automation Grade: Manual
• Application: Soil Sampling

Soil Auger /Dutch Auger, one meter long with handle Size:15cm dia Size 10 cms dia Size:7.5cm dia Size 5 cms dia EXTRA Extension rod, 1 meter long with screw type fitting   Rs.4800/- Rs.3000/- Rs.2300/- Rs.1700/- Rs.1200/-Rs.1200/-   Soil Auger, Bucket design (Agronomical auger)with. 1 meter long extension rod , with handle Size:15cm dia Size 10 cms dia Size:7.5cm dia Size 5 cms dia EXTRA Extension rod, 1 meter long with screw type fitting     Rs.4800/- Rs.3000/- Rs.2300/- Rs.1700/- Rs.1200/-Rs.1200/-   Soil Auger,  Euro design with. 1 meter long extension rod , with handle Size:15cm dia Size 10 cms dia Size:7.5cm dia Size 5 cms dia EXTRA Extension rod, 1 meter long with screw type fitting     Rs.5500/- Rs.3500/- Rs.2900/- Rs.2100/- Rs.1200/-   Soil Auger, Post Hole type, one meter long with handle Size:15cm dia Size 10 cms dia Size:7.5cm dia Size 5 cms dia Size 3.5cm dia EXTRA Extension rod, 1 meter long with screw type fitting   Rs.4800/- Rs.3000/- Rs.2300/- Rs.1700/- Rs.1200/-Rs.1200/- Rs.1200/-   Soil Auger, Screw type, one meter long with handle: Size:15cm dia Size 10 cms dia Size:7.5cm dia Size 5 cms dia Size 3.5cm dia  EXTRA Extension rod, 1 meter long with screw type fitting   Rs.5500/- Rs.3500/- Rs.2900/- Rs.2100/- Rs. 1800/-   Rs.1200/-   Soil Auger, Tube type, Appx 45cm long with 35cm vertical slit complete  with Extension rod 50cm long to make total length appx 1 meter complete with handle. Size 10cm dia Size 7.5cm dia Size 5cm dia Size 3.5cm dia Size 2.5 cms dia EXTRA Extension rod, 1 meter long with screw type fitting       Rs.6400/- Rs.5400/-    Rs.4600 Rs.4000/- Rs.3400/- Rs. 1400/-   Soil core sampler2 inch diameter  complete with handle and borer at the end 3”inch diameter  complete with handle and borer at the end 4” inch diameter  complete with handle and borer at the end Rs.4500/-   Rs.5400/-   Rs.6400/-   Gravel Auger dia apprx. 5” specially design for working in graveled soil.Complete with one meter extension rod and handle                            Rs.5400/-   Soil sampler ring for Bulk density of Soil : dia 53mm x 50mm height made of special alloy pack of 24 , in a box. Complete with one set of  Wooden hammer, Dolly(Ring) , SS spatula 4” with wooden handle, and a device ( as per design) to hit the dolly Rs.15600/-    

• Brand Name: Steco
• Application: Industrial
• Country of Origin: Made in India
• Portable: Yes
• Load Cell Capacity: 120 KN
• Body Material: Cast Iron

One of the primary functions of a drilling fluid is to carry drilled solids from the well bore. These solids are a contaminant, and if left in the system, can lead to numerous problems. The offsite sand content kit determines the volume percent of sand-sized particles in the drilling fluid. Api defines sand-sized particles as any material larger than 74 μm (200-mesh) in size. The test can be performed on low solids fluids as well as on weighted fluids. The kit consists of a glass tube graduated to read percent (%) by volume, a funnel, and a 200-mesh sieve contained in a cylindrical shaped holder. Consists of sand content kit, complete, with sieve, funnel, graduated tube, wash bottle & carrying case

With the immense knowledge and experience, our company presents a comprehensive array of Cement Testing Equipment in the national market. Rooted in Delhi(India), the company is providing qualitative products and that too at the most reasonable prices.

Product Code: EKE 165 Standrad: ASTM D 1558   Comprises hydraulic proctor needle system complete with a pressure gauge fixed at easily readable angle reading 0-70 kg x 2 kg. A set of needle points is supplied as a part of standard supply. This is identical to EKE 164, except that the penetration pressure on the needle is conveyed through a hydraulic system to a hydraulic pressure gauge. This system permits a greater control over rate of penetration because of better visibility of load indication on the gauge.

A great portable equipment for measuring pH, mV(ORP), Conductivity, temperature, TDS, Dissolved Oxygen (DO), Salinity and turbidity.pH Range: 0 - 14 pH Resolution: 0.01pH Accuracy: ±0.01 pH ±1 digit Temp Compensation: 0-100°C (Manual) Calibration Manual mV (ORP) Range: 0 to ±1999mV Resolution: 1mV Accuracy: ±1mV ±1 digit Conductivity (EC) Range: 0 to 1000 mmho in 5 ranges Resolution: 0.01 umho Accuracy: ±0.5% FS±1 digit Cell Constant: Adjustable (0.4 to 1.5) Reference Temp.: Adjustable (25°C) Temperature: 0 to 100° C Resolution: 0.1° C Accuracy: ±0.5° C ± 1 digit TDS Range: 0 to 10,000 mg/litre Resolution: 10 mgs/litre Accuracy: ±1% FS ±1 digit DISSOLVED OXYGEN (O2) Range: 0 to 20 ppm Resolution: 0.1 ppm Accuracy: ±0.2 ppm ±1 digit Temp. Comp.: 10° C to 50° C (Manual) DO Sensor Gold/Silver Amperometric Calibration Manual SALINITY Range: 0 to 40 ppt Resolution: 0.1 ppt Accuracy: ±0.5% ±1 digit TURBIDITY Range: 0 - 100 JTU Resolution: 1 JTU Accuracy: ±3% FS ±1 digit Sample size: 30 mm glass tube Light: 6.8 V Tungston lamp Detector: Photodiode GENERAL Display 3 1/2 digit (LCD) Operation Temp. 0° to 50° C Housing Materials ABS briefcase Power Supply 230 V ±10%, 50 Hz AC, 9V Battery (Dry cell) Standard Accessories Include the following:pH electrode, Conductivity/TDS/Salinity probe , Temp. probe, DO probe, Set of DO membranes, Test tube for turbidity (3)

The concrete test hammer is an instrument, which is easy to use, for quick and approximate measurement of the resistance to pressure of manufactured concrete products. The principles on which it works are based on the rebound impact of a hammer on a piston, which rests against the surface of the concrete products. The Greater the resistance of the concrete, greater is the rebounded impact. By reading this rebound impact on a scale and relating it to curves on graphs supplied with the instrument, the resistance to compression in MPa or PSI can be found, with 20% of actual.Consists of a barrel in which is housed a hammer mass attached to an impact spring which slides on a guide bar. A plunger is attached to the guide bar, which is pressed against the surface to be tested. As the piston is pressed against the surface to be tested, on reaching the compressive strength, the hammer mass is released and rebounds to a certain extent (according to the strength of the surface) which is indicated by a rider on a calibrated scale. A lock button fixed on the body of the hammer, locks the rider in place and the rider can be recared to zero position by using the same button. The equivalent compressive strength can be computed from the chart supplied. Each hammer is calibrated against at standard test hammer, and is suitable for specimen of compressive strengths 100 - 700 kg/cm. The instrument, complete with a grinding stone for polishing the test surface, is supplied in carrying case.

• Usage: Industrial

This test is used to determine the elapsed time between batching of a concrete sample and when it is deemed by standard methods to have set. The method involves measuring the penetration resistance of a test sample, which has had coarse particles removed at periodic intervals. It is particularly useful, in determining the effect on setting time of admixtures in the concrete, where these may have been introduced specifically to increase the setting time. It consists of cylindrical spring housing with a plunger attached to the top of the spring. Penetration needle is attached to the other end of the spring housing. The plunger is graduated in 1 kg divisions, to a maximum capacity of 60kg, which can be read with respect to the top end of the spring housing. A set of six needle points with areas of 645, 323, 161, 65, 32 and 16mm2 are provided. Supplied complete in a wooden carrying case Consists of a needle having face area 3/10 sq.cm. and graduated at a distance of 25mm. The needles point is an integral part of barrel which houses a calibrated spring. The spring is confined in a sleeve. The resistance offered by the concrete mortar is shown on the direct reading scale with a marker ring which holds its position when released. Scale range is 0-50 kg/cm2 when the penetration resistance reaches a value of 35kg/cm2 the concrete is assumed initially set. Supplied complete in a leather carrying case. AS PER ASTM C-403

Cement sampler is an important cement testing equipments as the cement industry samples its product in many states and forms: slurry, liquid, powder, clinker, slag and finished cement. Cement Sampler Manufactured by us used to sample cement from packages. Its Made of brass, it has an outside dia. of 32 mm x 700 mm long

• Color: Blue
• Material: Stainless Steel
• Automation Grade: Semi-Automatic
• Usage/Application: Laboratory
• Packaging Type: Box
• Display Type: Digital
• Grade: Manual
• I Deal In: New Only
• Battery Backup: 5-6 Hours
• Testing Type: Soil Fertility, Heavy Metal in Soil, Soil Suitability

• Weight: Approx 5kg
• Material: Mild Steel
• Product Type: Point Apparatus
• Power Source: Electricity
• Height: Approx 2fts

PSI manufactures equipment ranging from Liquid Limit Device to state-of-the-art equipment like “StressStrain Controlled Machines and Dynamic Testing Machines for Soils”. Needless to say at this stage it is one of the biggest manufacturing house involved in the design and production of these equipment.

• Country of Origin: India
• Certification: CE Certified
• Weight: 100-500kg
• Color: Brown
• Voltage: 220V
• Driven Type: Electric
• Warrenty: 1year
• Type: Digital CBR Testing Machine
• Power: 3-5kw
• Brand Name: U Test
• Application: Industrial

• Optional ::  
• Hollow Cone Greace worker hand operated: Power Consumption :
•  : 220/230V AC supply Single Phase
• Duty Cycle ::  
• Continuous: Housing Material :
•  : MS casted duly powder coated & stoving Painted (Brass / Alum. Machined Parts)

Used for penetration Test on wide variety of material such as grease, petroleum, Tar, Wax, Bitumen, Rubber asphalt & Pharmaceutical cream Complete with Rack & Pinion & Pointer assembly provide fine adjustment of needle top to sample & incorporate a sliping clutch mechanism which make reading of Penetration & subsequent resetting a sample & accurate operation. Dial graduated from 0-400 in 1/10 millimeter (mm) Sub division Supplied with two sample containers Consist of head support mounted on a vertical rod which can be adjusted for height  Applications : For Pharmaceutical Institute, Research Lab use

Soil Testing Equipment, Box Strapping Machine, Grain Moisture Meter

Two Hinged Arch Apparatus, Pocket Weather Meter, Tilting Level

Ultrasonic Pulse Velocity Tester, Hardness Software, Abrasive Cut Off Wheels

Soil, water And liquid testing Analytical Instruments

Test Sieves