Test Rig Dealers in Gurugram

The ultrasonic parking sensor test rig is an End of Line System developed for final testing of Rear parking sensors developed by NIPPON AUDIOTRONIX India. The Sytstem check all the test parameters of the sensor like Distance, Voltage, Current etc by carefully producing and excitation signal and recording the echoed response of the same using National Instruments Hardware and LABVIEW software meanwhile the Current and voltage parameters are monitored using Digital Multimeters and oscilloscopes. A custom Report for all the tests is generated and saved followed by BARCODE printing for the part.

In aviation, the dynamics of hydraulic engineering is not merely limited to the design and manufacture of an aircraft but also in the functioning of its various components and systems on the ground as well as in air. Thus whether taxiing on the runway or in a trajectory flight, the applications of this science in the form of cylinders, pumps, reservoirs, valves, flight and wing controls (ailerons, rudder and elevator) among others are most crucial. Keeping in view the safety aspects, all these systems call for highest level of monitoring and preventive maintenance for their upkeep in the course of their operation and utilities. This is enabled by the hydraulic test stand as an important diagnostic and analytical medium to ascertain the worthiness of each component. Also known as the test bench, it thoroughly tests the entire range of new, refurbished and even cannibalised parts and subassemblies. As such despite the advent of computers and automation based on assorted software for the ‘fly-by-wire’, there is an eternal demand for the services of hydraulic cartridge valves suppliers and test rigs, in India and around the world.

We offer it in different specifications, so, that it can suit all your industry needs. These tools are highly demanded in various industries because of its unmatched quality and superb performance. Our team manufactures it with modern technology, so, that it can match international quality standards.

Torquemeters and Torque Test RigsTorquemeters of very high accuracy and credibility both for test and research and development applications and also for permanent installation on large turbo machines. Product DescriptionTorquemeters have a worldwide reputation for torquemeters of very high accuracy and credibility both for tests and Research and Development applications and also for permanent installation on large turbo machines. Torquemeters Limited has specialized in providing accurate and reliable instrumentation of this type for many years and has earned itself considerable repute over the years.Testing diverse systems has always presented significant opportunities for Torquemeters Limited and their experience and background in this area is extensive. The need for testing is increasing significantly and more and more organizations require accurate and repeatable test facilities. In some cases manufacturers use electric motor drives for testing but many of these systems require the use of step up gearboxes. When the errors caused by gearboxes are combined with the uncertainties caused by poor power factor compensation of the electric motor the accuracy improvements that we can offer are valuable in a competitive manner.Torquetronic torquemeters also have some relatively advanced features that have been developed in conjunction with companies such as Rolls Royce and their experience in providing them with test systems for more than 40 years.It has also been noted that all torque measuring systems change zero at high speeds due to the influence of centripetal forces. Both the 613 and 700 units have a facility to automatically correct the torquemeter zero with changing speed and they can, therefore, maintain their accuracy over an extremely wide operating range. Why We Need TorquemeterWe manufacture a range of extremely accurate torquemeters that are supplied with torsion shafts that are rated to the suit the individual application. This capability further enhances accuracy, as the customer does not need to buy a standard rating that is invariably higher than is required.The ET (Electronic Torquemeter) range of transducers have interchangeable torsion shafts. This means that a single torquemeter can be adapted to suit a wide range of products and maintain accuracy. Our competitors would have to supply several torquemeters or compromise accuracy. Changing torsion shafts is likely to be more convenient than changing torquemeter, as the basic test rig layout would not need to be changed. The price of a single torquemeter with several torsion shafts is usually more cost effective than the purchase of several torquemeters of different ratings. We should also bear in mind that unlike many strain gauge devices our electronic readouts are not dedicated to individual transducers and this can provide a further cost saving. The Tordisc coupling offers the lowest weight/torque capacity of any coupling that is currently available.Models613 Models:The 613 Model has complete front panel display and provides either 0-10V or 4-20mA analogue outputs of torque, power and speed. This unit can also be fitted with an RS232 Interface.700 ModelsTorquemeters Ltd. are also the world leaders in continuous duty torquemeters for oil, gas and petrochemicals industries, with over 350 units in service, worldwide, on turbomachines up to 80 MW and 150,000 rpm with exceptional reliability.ApplicationsMiscellaneous Applications: Domestic Appliances, Electric Motors, Lubricants/Bearings, Seal Development, Railway Vehicles, Machine Tool Spindles.

We were the first air filtration company in Europe to invest in our own Eurovent & EN 779 test rigs. The test rigs have undergone rigorous 'round robin' tests to ensure consistency of filter evaluation with independent test laboratories.By having a number of our own test rigs we can test new filters as well as used filters from the field to build up our own database of how filters work and perform in real life. Standards have so far been concentrating on finding fast, economical methods to classify filters.

While SKF has a rich history in the research and development of bearing technology, it also has deep roots in the field of lubrication technology. Through the development of a number of grease test rigs, we continue to deepen our understanding of lubrication theory and pass that knowledge on to our customers.

Test Rig, Polyamide Tube Forming Plant, Polyamide Tube Profile Forming Plan

TORQUE TEST RIG, Air Leakage Tester, Jigs Fixture Design Servic