Test Rig Dealers in Pune

Triotech have developed tractor transmission test rig for 70 HP capacity. Also designed & manufactured drive line modules required for these test rigs.

Test rig consists of a Pelton wheel water Turbine, designed for laboratory experimental purposes and to conduct test in metric units. The specifications of the turbine are as follows:- Design Speed - 1000 RPM. Output Power - 1.0 KW The turbine consists of a cast iron body with a large transparent acrylic window, a nozzle and spear arrangement, a rotor assembly of shaft, runner and a brake drum all mounted on a sturdy base frame. The pelton buckets and nozzle are made of gun metal and the spear made of brass for corrosion resistance. The input to the turbine is controlled by adjusting the spear position with a hand wheel. A rope brake arrangement with a spring balance is provided for loading the turbine. The transparent perspex sheet side casing is provided for visual observation of flow on the buckets. Water inlet pressure is measured by a pressure gauge. Water to the turbine is provided by a centrifugal monoblock pump set of 5 HP capacity. The pump operates on 440Volts, 3 Phase, 50 Hz line. Other standard accessories include a DOL starter, switch, flow control gate valve, suitable piping. Flow measuring unit consists of a venturimeter with pressure taps connected to two pressure gauges mounted on a panel board. The complete test rig is mounted on a storage tank of suitable capacity. The tank is provided with FRP lining for total rust protection  

Typically the most efficient way to get high production volumes and to produce parts at a high speed is to use a rotary or linear indexing machine. By performing simultaneous actions on a number of parts the cycle time is reduced. Whether it is a rotary indexing dial or a linear power and free conveyor, RND Automation can design and build a machine that allows you to assemble complex parts at speeds of up to 120 parts per minute and in some cases even faster. By integrating inspection and intermediate reject stations, RND can prevent faulty parts from having value added work done to them, removing them from the machine after the failed assembly step. Part and reject tracking can also be designed into the machine to allow you to ensure quality.

This is an invaluable aid in the effective understanding of the performance characteristics of a centrifugal air compressor. The compressor is run using an AC motor. The system has indicators for pressure, temperature and airflow rate. Optionally, it has a facility to vary the speed of the motor to get various performance parameters for better understanding.

Test Rigs Machines For Assemblies And Products Centrifuge Test Machines For Acceleration Up To 5000 G Centrifuge For Biochemistry Laboratories. Drop Testing Machine To Check The Packaging Strength. Pull Of Test Machine To Test Adhesion Strength High Speed Spin Testing Machine For Speed Up To 60,000 RPM For Performance Testing Of Products. Endurance Test Rig For Fatigue Testing Of Automobile Components.

The Valvetrain Test Rig is designed to carry out durability testing of engine valve train components. Measurement of critical temperature, pressure & force measurement.

The photo is design and develop for the Pulley bearing test Rig for endurance test of the automotive Pulley bearings.  This pulley bearing test rigs are using for life cycle test of the verios types of Pulley bearings and micro groove belt life cycle testing.JKS Ttech also design and develops extreme condition testing of the Pulley bearings and various types of bearings and belts.We also offering mud spray, salt spray, and oil spray during the endurance testing to validate the product in real conditions.   

We manufacture life test rigs that evaluate performance of the hermetic compressors under varying load conditions.   Features: • In-house electrical panel and data acquisition system design with Yokogawa / NI DAQ systems and LabView DAQ programs for total automation.• Multi refrigerant capabilities.   Specification: • Capacities ranging from 0.15 kW to 85 kW.• Option of automatic or Semi-automatic control.• Total compliance with applicable ASHRAE / ISO / JIS Standards.

SL90 Cylinder Head Inlet Exhaust Valve Leakage Testing Machine with Parag Unit for Kirloskar Oil Engines Ltd. Cylinder Head Jacket Leakage Testing Unit for Cummins 4R 810 Cylinder Head Water Jacket & Oil Passage Testing Machine with ATEQ Unit for Kirloskar Oil Engines Ltd.

Specially designed dust feeding systems as per JASO. Flow rate measurement using Manometer Flowmeter principle. PC based system for accurate measurement and dispensing of dust

This is complete system to test the production of washer pump of an automobile. The system is based on PLC. Runs in manual & auto mode.It measures the pressure of the water delivered by the pump & current drawn at different loads on the pump.

Centrifugal Pump Test Bench, Notch Apparatus, Subsonic Wind Tunne

Electric Motor Test Rigs, Dynamometer, Transmission Test Ri

Valve Timing Test Rig, Automotive Test & Measuring Instrument

Motor Test Rigs, Robotic Automations Control System, Testing Equipmen

Test Rig, Special Purpose Machines, Handling System

Testing Rigs, Engine Test Equipments, Measuring Equipmen