Test Rig Dealers in Roorkee (6 products available)

The company is a prominent Manufacturer and Supplier of Francis Turbine Test Rigs. This is a reaction turbine and this Test Rig shows the construction and working of Francis turbine. Rope brake dynamometer is used to measure the output of turbine. Pressure gauge and orifice meter are used to measure the input of turbine.   Specifications : This Francis Turbine Test Rig I00mm size to develop 2 HP at 1250 RPM with a flow of about 1400 Ipm at 15 meters supply head. Supply pump set lOOxlOOmm size, 1500 Ipm at 15 meter head suitable for supplying water to the above turbine. Monoblock Centrifugal Pump  -  (5 HP, 3 Phases, 440V) Pump Size  -  Suction size 80mm & Delivery size 80mm Pump Discharge  -  1500 LPM Delivery Head ; 15 meter RPM  -  3000 RPM   Sump Tank : MS Tank to store sufficient water for independent circulation through the unit experimentation and arrange Within the floor space of main unit. Capacity 650 Itr. Rope Bake Dynamometer is used to measure the output. Spring balance and dead weights are used to measure the load. Runner Diameter 220mm. Discharge Butter Fly valve used to control the flow rate of water. Spring Balance 6 Kg (Salter Make) Pressure Gauge of 4.2 kg/cm2 is used to measure the pressure head. Rigid MS frame work compactly fitted with all the above items as a self-sufficient package unit suitable for operation without any foundation. Switch and starter suitable for above motor pump set mounted on the control panel board. Experimental Capabilities : To determine the efficiency of Turbine To draw the characteristics curve of Turbine

Clients can stay assured for the products that we offer, as they will remain damage free. For this, we make use of premium packaging material for wrapping them. Buyers can stay rest assured about the quality of our products as we check each and every product at diverse stages.   Range: Pelton Wheel Turbine Test Rig (Capacity : 1 Kw) lKaplan Turbine Test Rig (Capacity : 1 Kw) Steam Turbine Test Rig Centrifugal Pump Test Rig (Three Speed Cone Pulley) Gear Pump Test Rig Submersible Pump Test Rig Hydraulic Ram (Closed Circuit) Hydraulic Tilting Flume / Open Channel - 4 Meter Hydraulic Tilting Flume / Open Channel - 6 Meter Hydraulic Tilting Flume / Open Channel - 10 Meter Experiment Pneumatic Apparatus Hydraulic Tilting Flume / Open Channel - 10 Meter Experiment Hydraulic Apparatus Pelton Wheel Turbine Test Rig (Capacity : 3.7 Kw) Francis Turbine Test Rig (Capacity : 3.7 Kw) Kaplan Turbine Test Rig (Capacity : 3.7 Kw) Centrifugal Pump Test Rig (Constant Speed) Reciprocating Single Stage Pump Test Rig Jet Pump Test Rig Cavitations Test Rig Hydraulic Tilting Flume / Open Channel - 8 Fits Hydraulic Tilting Flume / Open Channel - 5 Meter Hydraulic Tilting Flume / Open Channel - 8 Meter Wind Tunnel Experiment Pneumatic Apparatus Wind Tunnel Hydraulic Ram Model  Turbine & Pumps Models : Centrifugal Pump Deep Well Turbine Pump Francis Turbine Model Kaplan Turbine Model Steam Turbine Model Reciprocating Pump Jet Pump. Submersible Pump Pelton Turbine Model De-level Turbine Model lHydraulic Ram Model

Speed : 1250 RPM

Motor Power : 2 HP

Pressure Gauge : 4.2 kg/cm2

Flow Rate : 1400 Ipm at 15 meters

Based in Roorkey, Uttarakhand we have emerged as one of the focused manufacturers, exporters and suppliers of the Pressure Testing Rig. This system that we offer can be used to simulate aircraft fatigue induced by changes in altitude. The design and quality of all the products we offer are stringently checked and monitored at each stage to ensure that the final product meets is on par with industrial standards.   Details : To design a system to simulate few years of aircraft fatigue induced by changes in altitude. The system was required to pressurize and depressurize all voids within the aircraft and be accurate to within 0.1psi at all stages of the operation. A very high level of safety was required, to prevent any potential damage to an aircraft through over pressure. The input control signal would be sent via a PLC and the operation would be recorded.

Voltage : 220 V

Country of Origin : Made in India

Usage/Application : Industrial

Test Component : Engine Test

I Deal In : New Only

PELTON TURBINE TEST RIG is manufactured by Engineering Models and Equipments to demonstrating PELTON TURBINE , PELTON TURBINE TEST RIG can be availed from us in varied different specifications as per the requirements of the clients.