Test Rig Dealers in Delhi (29 products available)

Product Code: EKE 2252IKaplan Turbine is an axial flow reaction Turbine named in honor of Dr. B. Kaplan, a Gennan Engineer. This turbine is suitable for low head. The power produced by a turbine is proportional to QH. As the head (H) decreases the J discharge (Q) must increase to produce the same power. The present Set-up consists of a scroll casing housing a runner. Water enters the turbine through the stationary guide vanes and passes through the runner axially. The runner has a hub and airfoil vanes, which are mounted on it. The water is fed to the turbine by means of Centrifugal Pump. The runner is directly mounted on one end of a central SS shaft and other end is connected to a brake arrangement. A transparent hollow cylinder made of acrylic is fitted in between the draught tube and the casing for observation of flow on to the airfoil vanes. This runner assembly is supported by thick cast iron pedestal. Load is applied to the turbine with the help of this brake arrangement so that the efficiency of the turbine can be calculated. The Set-up is supplied with control panel. A draught tube is fitted on the Outlet of the turbine. The Set-up is complete with guide mechanism. Pressure and Vacuum Gauge are fitted at the Inlet & Outlet of the turbine to measure the total supply head on the turbine.Experiment: To study the operation of a Kaplan Turbine To determine the Output Power of Kaplan Turbine To determine the Turbine Efficiency Utilities Required: Water Supply and Drain. Electricity 15 kW, 440V AC, Three Phasee

• Type: Refrigeration Test Rig
• Display Type: Analog
• Grade: Automatic
• Power Supply: AC
• Voltage (V): 220
• Frequency (MHz): 60
• Power Source: Electric

MFP filter test rigs from Palas® have already proved themselves many times over all around the world in practical applications in development and quality control. The MFP filter test rig is a modular filter testing system for flat filter media and small mini-filters. The MFP 1000 can be used to determine: pressure loss curve on the medium without a dust coating, fraction separation efficiency, or burden and fraction separation efficiency during application of the burden within shortest times – reliably and therefore cost-effectively. The corresponding aerosol generator can be used depending on the standard or application. With the aid of the new light scattering spectrometer Promo® 1000, clear and reliable determination of the aerosol concentration and the particle size and therefore a clear determination of the fraction separation efficiency can be ensured. The largely automated setup of the test sequence together with the clearly defined individual components and the individually adjustable sequence programs of the filter test software FTControl combine to deliver the high reliability of our measurement results. As a result, filter tests can be performed quickly and easily with the different test aerosols.

• Type: Centrifugal Pump Test Bench
• Application: Testing Centrifugal Pump
• Weight: 100-1000kg
• Color: Available in Many Colors
• Voltage: 110V
• Automatic Grade: Automatic
• Power: 1-3kw
• Warranty: 1year

The Bench Mark* 320 is a economical, fully programmable alternative to old-fasinoned permanent  marking techniques. This complete system, with self-contained controller and extruded aluminum marking head mounting post and base, is the right choice for many stand-alone bench top marking applicatons. An Electromechanical marking pin eliminated the need  for any air supply, making it easy to move the BenchMark* 320 from one work area to another."I want to thank Telesis for manufacturing a product that performs as well in real life as it states in your literature. Our new BenchMark* 320 Marking System from Telesis has performed above our expectations since putting it into service. The BenchMark* 320 greatly simplified our identification tag printing process and provided Krisp Kreme with "just in time" tag production capabilities. If you are looking for high quality, flexibility and realiability in permanent marking equipment, Telesis had the solution." Jeff Renz, Krispy KremeFeatures Extremely affordable High quality, permanent, programmable marking on a wide range of materials – from soft plastics to hard metals up to Rc60 Large 4" x 6" (100 x 150mm) marking window Unique marking arm design allows clear access for loading and unloading of parts. Electromechanical marking pin eliminates the need for air supply. Marks up to 5 characters per second. Automatically generates serial numbes, as well as date, time and shift codes. Compact, conventient controller with rubber keyboard and 4-line LCD display-no PC required Optional Accessories Rotary fixture for marking circumferences of cylindrical parts. Bar Code Scanner for automatic data entry Start-Print footswitch and Pushbutton station Logo/Font design software package for design of custom fonts or logos PC-Based upgrade utility available Free from www.telesis.com PC-Based pattern Back-up utility available Free from www.telesis.com

• Capacity: 500 watts
• Refrigerant: r-134 a
• Compressor: hermetically sealed
• Condenser: forced convection air cooled

We are the leading manufacturers, exporters and supplier of this products.

Four poster test rig is designed to test durability of most cars. A fully self contained test rig combined with multi- channel control system and user friendly application real time effects and performs durability, performance or vibration testing in a controlled laboratory environment. • Two poster test rig is designed to test durability of most Two Wheelers. • Three poster test rig is designed to test durability of most Three Wheelers.

We are the manufacturer of world class testing equipments, Hepa Filter Test Rig.

• Rated Current: 4.5 Amps
• Input Power: 1.0 Kw
• Supply: 220-240 Volts, 50 Hz, 1 Phase
• Cooling Capacity: 450 Watts At Rated Test Conditions ( 1/8 Tr )

Three main components from main parts of the test rig. Welded steel base plate, complete with Mechanical Brake or A.C. Alternator or D.C. Generator or Eddy Current Dynamometer, Drive coupling and with safety guard, anti vibration mounting. Resistance loading with selector switches to the engine from no load to full load (Only for A.C. Alternator & D.C. Generator) Panel board positioned over the base plate consisting of fuel system with flow measurement by burette, air flow measurement system, temperature indicator.

We are the manufacturers and suppliers of the finest assortment of high quality Test Rigs that are manufactured from the best of raw material and with the latest technologies for rigs that can be compared to test rigs of international quality. These rigs, owing to their superior levels of performance and operational efficiency, have gained customers from sectors like automobile, agriculture, building & construction, defense, hydro electrical projects, paper industries, sugar industries, Steel mills etc.

These test rigs are designed for carrying out filter testing for flow rate against pressure drop characteristics, filtering efficiency and life characteristics. These test rigs are offered to suit specific requirements. This machine Air Filter Testing Rig for Automobiles & Gas Turbine Filter as per AMERCO Standard.    

We offer lube oil test rig. These test rigs are designed for carrying out filter testing for flow rate against pressure drop characteristics, filtering efficiency and life characteristics. These test rigs are offered to suit specific requirements.

• Features: Self contained water circulation unit , Compact design, Less maintenance required.

• speed: 3600 RPM

Three main components from main parts of the test rig. Welded steel base plate, complete with Mechanical Brake or A.C. Alternator or D.C. Generator or Eddy Current Dynamometer, Drive coupling and with safety guard, anti vibration mounting. Resistance loading with selector switches to the engine from no load to full load (Only for A.C. Alternator & D.C. Generator) Panel board positioned over the base plate consisting of fuel system with flow measurement by burette, air flow measurement system, temperature indicator.

• Features: Corrosion resistant, Easy to employ, High performance
• Item Code: BHI-ED-128

• Model: ALABS-A88-006
• Categories: Refrigeration & Air Conditioning Lab
• Working power supply: AC 220V ±10% 50Hz
• Capacity: <1KW
• Refrigerant type: R22
• Dimension: 1600*660*1890 mm

1 HP Centrifugal Pump Test Rig, subsonic wind tunnel, toxicity test apparatus

We are well known for supplying and exporting of wide variety of vacuum valve test rig.

Air Filter Test Rig, oil filter testing machine, Multipass Testing Machine

Recalculating Air Conditioning Test Rig, car ac, Ice Candy Unit

bubble testing rigs, special purpose machinery, perforation machines

Rota Meter Test Rig, Static and Dynamic Apparatus, Cone Penetrometer

Reciprocating Single Stage Pump Test Rig, Metacentric Height Apparatus

Air Filter Test Rig, Sand Retraction Machine, Oil Dispensing Machine

Recirculating Air Conditioning Test Rig, Gasoline Engine

C Test Rig, oem products, Engine Dynamometers, K Test Rig

Air Permeability Test Rig, Sheet Shearing Machine ( Foot operated )

Sensors, Electronic Parts, transducers, spms, Packaging Machines

hydraulic test rig, Variable Displacement Hydraulic Single Pump