Test Rig Dealers in Mumbai

(11 products available)
  • Premium
    Four Point Bent Test Rigs

    Four Point Bent Test Rigs

    Get Price Quote

    • Number Of FlowerTest Rig
    • MaterialStainless Steel
    • ApplicationDetermine Specimen Stress Requirements
    • CompatibilityStress Corrosion Specimen As Per NACE TM-0316 Standard
    • AccuracyHigh Accuracy
    • PackagingReady To Use Connections Fittings
    • Specimen Size5-6mm (width) X 15-25mm (length) X 130mm (suitable For Testing)
    • Additional FeaturesDigital Deflection Meter Attachment, Tension-adjusting Screw With Lock Nut
    • AdjustabilityStress Level Can Be Easily Adjusted
    • Each assembly is provided with ready to use connections fittings. Test rig is designed to accurately determine specimen stress requirements. Test specimen size 5mm-6mm, width 15-25mm, and with length of 130mm is suitable for testing four point bending specimens. Stress corrosion specimen as per NACE TM-0316 Standard is machined before putting in the test vessel. The dimesions are offenly choosen so that A= H4. Four point bend test jig comes with digital deflection meter attachment to measure accurate deflection. 4-point bend test jigs are fabricated from precision-machined stainless steel with high accuracy. Stress level can be easily adjusted using a workshop wrench on the tension-adjusting screw and lock nut. Four- point bends provide a uniform tensile stress over a relatively large area of the specimen
    ...more
    www
  • Kaplan Turbine Test Rig

    Kaplan Turbine Test Rig

    Get Price Quote

    • Brand NameTAGLab
    • We are offering kaplan turbine test rig. Latest model kaplan turbine transparent outlet pedestal with stainless steel draft tube cast iron external bearing pedestal for longer bearing life base frame arrangement & chrome plated, slotted weights with spring balance rigid m.s. Frame work compactly fitted self sufficient package unit suitable for operation without any foundation.
    ...more
  • Centrifugal Pump Test Rig

    Centrifugal Pump Test Rig

    Get Price Quote

    The unit consists of a centrifugal pump provided with variable speed motor. The pump is provided with a vaccum gauge at suction and a pressure gauge on discharge pipe. The pump is provided with a variable speed drive & gate valve at discharge which facilitates estimation of pump performance at various speeds & discharge heads. Power input to motor is measure with energy meter. SPECIFICATION Centrifugal pump1"x1" size, Motor – Variable Speed P.M.D. C. motor Speed Controller for Motor. Sump tank: 900X400X400MM Measuring Tank: 400X400X400MM. Energymeter for motor input measurement. Pressure & vaccum gauge for measurement of head. Stop watch. The assembly of pump & control are mounted on the sump tank.   RANGE OF EXPERIMENTSFollowing characteristics can be studied at different speeds Discharge vs. Head Discharge vs. Input to pump Discharge vs. pump efficiency.   SERVICES REQUIRED Floor space of 1 m. x 1 m. 230 V., 15 A, A. C. supply with earthing connection.
    ...more
  • Multi Cylinder Diesel Engine Test Rig

    Multi Cylinder Diesel Engine Test Rig

    180,000 / Piece

    • CertificationCE Certified
    • Country of Origin380 V
    • ConditionNew, Used
    • Power SourceDiesel
    • Drilling depth0-30 m, 30-60 m
    • Dilling diameter0-50 mm, 50-100 mm, 100-150 mm, 150-200 mm
    ...more
  • Petrol Engine Test Rig

    Petrol Engine Test Rig

    199,000 - 200,000 / Piece

    • Number Of FlowerPetrol Engine Test Rig
    • Availability100-400kg
    • Country of Origin220V
    • ConditionNew
    • ApplicationIndustrial Use
    • Driven TypeMechanical
    • Power SourcePetrol
    • Automation GradeAutomatic, Fully Automatic, Semi Automatic
    ...more
  • Air Brake Systems Single Car Test Rig

    Air Brake Systems Single Car Test Rig

    Get Price Quote

    The Single Car Test Rig is a mobile unit with trolley arrangement & that can easily be transported to a single vehicle for testing the particular vehicle brake system. A large number of Stone India make Single Car Test Racks are being used for testing Wagon Brake System in Wagon Depots of Indian Railways
    ...more
  • Water Cooler Test Rig

    Water Cooler Test Rig

    2 / Piece

    • Country of Origin220V, 380V, 440V
    • ConditionNew, Used
    • Driven TypeElectric
    • Automation GradeAutomatic, Fully Automatic, Manual, Semi Automatic
    • ApplicationIndustrial
    ...more
  • Francis Turbine Test Rig +1

    Francis Turbine Test Rig

    385,000 / Piece

    • MOQ1 Piece
    • Country of OriginIndia
    • CertificationCE Certified
    • ApplicationEducation
    • ConditionNew
    • Brand NameSci-tech
    • Francis turbine is a radial flow reaction turbine. Energy of water is transferred to the turbine runner by changes in both velocity and pressure. Water enters the turbine unit circumferentially through the spiral turbine casing. It enters the periphery of the stationary guide vanes and flows radially inwards through the runner. After passing through the runner, flow is discharged nearly axially through a draft tube before entering the tail race. The torque developed in the runner is converted into useful work. Francis turbines are used in hydro-electric power plants operating with water source available at medium heads (say, 15 to 300m of water) and volume flow rates. It is essential for students to understand the operation and performance characteristics of Francis turbines. Sci-tech Francis Turbine Demonstrator Trainer Model FM 21 is an experimental set-up necessary for any hydraulic machinery and fluid mechanics laboratory of an educational institution. The Sci-tech Francis Turbine Demonstrator Trainer Model FM 21 has been designed to enable students to study the operation and performance characteristics of a typical single stage Francis turbine. The unit has a sump tank and a centrifugal pump driven by electric motor to supply and re-circulate water. The turbine is mounted with the axis horizontal on the top of the robust mobile frame.  Water enters the turbine casing through a variable area flow meter. A hand operated valve is provided at the inlet to control inlet head and flow rate. Inlet head is measured using a pressure gauge. After passing through the stationary guide vanes and runner, water is discharged through tube to the sump tank. A ring mechanism is provided to vary the position of inlet guide vanes. The flow rate though the runner can be controlled by operating inlet guide vanes. Transparent observation window is provided to see operation of inlet guide vane mechanism. Power generated in the turbine is absorbed by a disc brake dynamometer and the torque is measured using load cells. Turbine shaft speed is measured using digital tachometer. Instrumentation and control panel is included. The complete unit is manufactured from corrosion resistant materials. The Sci-tech Francis TurbineDemonstration Apparatus Model FM 21 is an important experimental set-up for any Fluid Mechanics and Hydraulics Laboratory of an educational institution. Optional ‘Sci-Cal’ Computer based learning software is included to enable students understand and conduct experiments, tabulate results and plot graphs.   List of Experiments 1.     Study of construction of Francis Turbine 2.     Determination constant head characteristics curve 3.     Determination of constant speed characteristics curves 4.     Determination of constant efficiency curves.   Important Features and Specifications: Standard Model: Turbine: output: 35W at 3000rpm, Water rate @. 40L/min, H=0.8m  Impeller Impeller blades: 10 Impeller dia: 20mm Impeller inlet height: 14.5mm Impeller outlet dia: 50mm Guide vanes: 6 adjustable with positioning marks  Measuring ranges Braking force: 20N Pressure Gauge: 0...5bar   High Capacity Model:             Functional model of Francis turbine, with a distributor with adjustable guide vanes that allows to control the water angle of incidence of the turbine:                       Diameter of the turbine: 52 mm.                       Speed range: 0-1200 r.p.m. approx.                       Rotor: Number of blades of the turbine: 15.                       Stator: Number of adjustable guide vanes of the distributor: 10.             Braking system:                       Band brake with adjustable braking tension.                        Load cell-force sensor, range: 0-20N.             Computer controlled water pump, with variable speed:                       Maximum height: 70 m.                       Maximum pressure: 7 bar.                       Maximum water flow: 120 l./min.                       Power: 1.5 kW.             Transparent wa
    ...more
  • Submersible Pump Test Rig

    Submersible Pump Test Rig

    65,000 / Unit

    • Country of Origin220 Volt
    • PackagingBox
    • Current15 A, A. C
    • weight30 to 35 Kg.
    • Floor space3 m. X 3 m.
    • Size Inlet100 mm
    ...more
  • Test Rig

    Test Rig

    Get Price Quote

    Test Rig, Double Cartridge Mechanical Seal, Single Spring Sea
  • Ice Plant Test Rig

    Ice Plant Test Rig

    Get Price Quote

    Ice Plant Test Rig, DC Shunts, Dimmer Sta
Filter by Locality
top