Dryers Dealers in Mumbai

Directly heated with hot air as well Indirectly Heated Dryers. Temperature Range: 50oC – 400oC.Hot Air :By Liquid Gaseous Fuel Electrical. Purpose :Drying, Roasting, Pre-heating, Low Temperature reactions. Capacity :50 kghr. – 25000 kghr.Sizes:Diameter : 0.4 mtr. – 3 mtr. Length : 3 mtr. – 45 mtr.Application :Mineral Processing Chemical Processing Food Processing Pharmaceutical Industries.

We bring forth a supreme quality Vibrated Fluid Bed Dryer (ADS-12) at competitive market price. Our Vibrated Fluid Bed Dryer is offered after conducting several quality control checks to maintain superior quality and is highly in demand in the international market.

We deals in manufacturing and supplier of air impingement dryer. Special features: material from remains intact - low power demand - continuous operation

An Air Tray Dryer Is used for the best drying results in conventional process. It consists of a double-walled cabinet with one or two doors. The gap between two walls is filled with light resin-bounded fibreglass wool insulation material to avoid heat loss.

 The Rotary Vacuum Dryers offered by us are a clean, simple and effective way to dry wet cakes, wet powders and slurries. These are used where either a solvent is to be recovered or the drying is to be carried out at relatively low temperatures for heat sensitive material. We manufacture our range using high grade material that includes C.S, SS 304 and SS 316. Available in different capacities, ranging from 50 liters to 16000 liters, these find application in industries related to dyes, pigments, agrochemicals, polymers, metal powders, herbal products, pharmaceuticals, food products and speciality chemicals.Capacity : 0.5m3 to 10.0m3  MOC:- M.S. S.S.304, S.S. 316 SS 316L Material Jacketed or Limpeted type . Applications : Chemicals, Pharmaceuticals, Food Products, Resins, Dyestuffs.

We are regarded as Refrigerated Air Dryer Manufacturer, Exporter and Supplier in Maharashtra. Refrigerated Air Dryer, provided by us, has shell and copper tube heat exchanger. Refrigerated Air Dryer that we provide are efficient in power saving. Our Refrigerated Air Dryer has a non-cyclic system with provision of hot gas bye-pass valve. With compact design, our Refrigerated Air Dryer is highly in demand. Moreover, Refrigerated Air Dryer that we offer can easily bear HP, LP, WP overload safety trips. Range : 20 CFM to 5000 CFM

This vertical centrifugal dryer is made of stainless steel. It is suitable for washing and dewatering Centrifugal Dryerof plastic films, scraps and granular material. Main Features of Centrifugal Dryer High degree of dehydration Saving energy High efficiency High degree of automation Easy to clean-up Low noise Safe

Nauta/ Conical Vacuum Dryer is ideal for temperature sensitive materials. Ideal Drying system for hazardous / toxic material Clean internal conical design provides complete discharge and reduces cross batch contamination. Drive system on Top & Material Feeding on top & product discharge through bottom helps in ease of process & material Handling All Dryer Internals, product process area is in 316 / 316L, stainless steel construction, Mirror polish. Sturdy welded external shell reinforcement ensures maximum operating protection and dependability under full vacuum operation. Heated Jacket in combination with vacuum atmosphere ensures complete vaporization of moisture and drying of product. Fluid heating and circulating systems either steam or electrically heated, as skid mounted system Validation ports and nitrogen purge nozzles provided. Vapor condensation unit along with a receiver for solvent recovery. Integrated Vacuum pump system provided to match custom requirements. CIP (Cleaning In Place) system can be provided. PLC based automation of process batch control, with printable option.. Full validation services available including DQ,IQ/OQ, FAT / SAT protocols. cGMP construction for Pharmaceutical Models. Kilolab Model to Production Models available Capacity ranges from 50 Liters to 5000 Liters

Fluid Bed Dryer is a widely used in pharmaceutical industry  for highly efficient, dust free, fast, gentle & uniform,drying of granulated materials obtained from wet granulation.   Process concept :   The drying is achieved through a combination of moisture diffusion from the solid material to the heated air stream and the removal of that moisture by forced air convection. the product to be dried is transformed into low expanding fluidized bed with the aid of drying air added from below by means of specialized inlet air distributor. In this condition, the particles are isolated from one another and kept in constant motion. The high specific surface of the fluidized product helps great amounts of heat transfer.   A special effective air flow during fluidizations allows to pass through the entire surface of every single particle. FBD is manufactured  for over pressure integrity using a unique sealing system for operator safety and product containment.   Fluid Bed Dryers are manufactured in various capacities and batch sizes. Batch size means the weight of wet product i. e. including moisture / solvent that can be charged  in the dryer at a time. In case of very granular or crystalline material the capacity may be increased by about 15 to 20% . The capacity depends upon the material characteristic (i.e. Crystalline or amorphous), bulk density,Moisture content, hygroscopic nature etc.   We offer Fluid Bed Dryers of capacities 5 kgs to 300 Kgs.     Salient Features :   Construction as per cGMP standards. All contact parts in SS S.S.S.S.316.) Inflatable gaskets for product container top bottom and filter housing sealing. Auto shaking of filter bag at settable intervals. Air control damper at inlet and outlet for consistent and controlled fluidization pattern Online sampling of product. Automatically controlled by pass. Integrated cleaning system for WIP & CIP. PLC based control for recipe administration and visualization. Integrated cleaning system for WIP & CIP. PLC based control for recipe administration and visualization. Vertical explosion design. Explosion relief vent to withstand up to 2 bar pressure. Explosion proof and pressure shock proof design. Optional features : Fully automatic operation through programmable logic control Provision of printer port Electric / Steam / thermic fluid heating system HEPA filter at inlet Different pressure gauge HEPA filter Material flow monitoring system ( Broken filter bag detector) Inflatable tubes, PLC automation control, AC Variator for blower, WIP / CIP system, pneumatic damper on ducts, police filter, Scrubber on discharge, chilling coil, Top spray arrangement with holding tank and peristaltic pump,   FLP construction etc.

Fluidized bed drying is the optimal method for controlled, gentle and even drying of wet solids. The technology is also suitable for post-drying of spray granulated or extruded products with very low residual moisture. Our speciality fabric bags provide accurate and efficient solution which ensures the best possible recovery of the solid.

  Driers : Our Rotary Vacuum Paddle Driers are one of the most efficient batch driers with optimum Solvent Recovery minimum Energy Consumption & Solid Losses. We can dry Heat Sensitive materials at Temperatures as low as 60oC Under Vacuum operation without changing the product properties due to exposure to elevated temperatures.  :: The feed can be in the form of Wet Cake, Powder and Slurry:: Available from 100 ltrs. to 20000 ltrs. Gross Volumetric capacity:: Available in Conventional Chain Drives or maintenance - free Direct - Driven energy efficient shaft     mounted Gearboxes:: Offering other types of driers such as Rotocone Drier Tumbling     Shell Drier, rotary Drier, Tray Drier, Vacuum Tray Drier

Reproducible powder production at lab scale; Ideal for scale up to pilot or production; Proven performance – the most established & flexible instrument for LAB spray drying; Cost efficient — achieve reproducible result at minimal costs; Easy to use; Simple switching between two nozzle variants; High yields (upto 70%) Shorter times to optimize formulations       Additional Features : Online nozzle cleaning with deblocker 3-Fluid nozzle for spraying immiscible fluids Inert loop for condensation of solvents and feed back of inert gases Fast setup and cleaning times Lowest maintenance costs Requires only AC 200/230V; 50/60Hz power supply (other power requirements available) PC based operating system with ethernet interface Inert Loop for closed cycle spray drying Inlet – Pre + HEPA filters Outlet filter with pressure drop indication for optimal protection of the aspirator A compact laboratory spray dryer with a maximum temperature of 26000 and liquid flow rate of up to 1000 ml per hour. This unit is ideal for research and development and sample preparation of many products. All units feature a simple and intuitive touch screen operation system with recipe functions and USB data logger.   Technical Specification GLS 1000 Mini Spray Dryer   Evaporation capacity : 1000 ml / hr of water; higher for organic solvents Sample volume : 30 ml – 1 L Air flow max. : 50 cu.m/hr (free running) Heating power : 4 KW Max inlet temp. : 260° C; Accuracy ± 1° C Hot air flow : Co-current Nozzle type : Two-fluid nozzle with deblocker Nozzle diameter : 0.5 & 0.7 mm with deblocker assembly; 1.0 mm, 1.5 mm & 2.00 mm also available Compressor pressure : Max. 8 bar Typical yield : 40 – 70 % Operating conditions : Open, optional closed cycle with inert loop Power consumption : Max. 14 amps Voltage : 200 – 230 V; 50/60 Hz Dimension (H x W x D) : 1100 x 500 x 600 (mm) Weight : 60 kg    

Kilburn has developed a desiccated coconut (dc) dryer based on the principles of vibrations & fluidisation. This dryer is compact , fuel efficient and produces d.c. Of very high quality meeting international food standards. The conventional dryers have several limitations of product quality, hygiene, fuel efficiency and maintenance.

Brassomatic replaceable Core Dry-all Filter Driers are made up of heavy duty steel shell, housed inside the Dry-all mounted porous filter cores. These provide maximum water capacity, excellent acid removal characteristics and the ability to remove the products of oil decomposition. A bolted end flange allows for simple and trouble-free installation. Sizes available: ½” to (3+1/8)” For Single Core Shells: ½” to (1+1/8)” For Two Core Shells: 7/8” to (2+1/8)” For Three Core Shells: (1+5/8)” to (3+1/8)” For Four Core Shells: (1+5/8)” to (3+1/8)”