RF Passive Components Dealers in Nashik

We are successfully supplied SUNNY Capacitors to Indian Railways from last many years without single failure. Our consistent supply to Indian Railways gives us tremendous confidence in our product. Our well experience technical team, constantly practicing and R&D to adhere good quality product. SUNNY Capacitor's have Railway approvals : 1. CLW (Chittaranjan Locomotive Works) 2. RDSO ( Research Designs & Standards Organisation) We are the First Indian manufacturer to develop manufacture and supply Capacitors for RC Damping Panels and Three Phase LOCO MOTIVES for Indian Railways.

We offer power film capacitors: fp-4-150 highlights: rated voltage range : 400 vrms to 1000 vrms capacitance range : 0.05 mfd to 2.50 mfd max current : 400 irms max power : 150 kvar frequency range : 63 - 700 khz stray inductance : ˂ 3 nh max operating temp. : core temp. 85°c size : 30.2 mm x 30 mm x 68mm application : induction heating, electric cars, medical imaging, ev wireless chargers, resonant circuits. Power film electrical capacitors with high and low inductance for applications like electric cars, medical imaging, ev wireless chargers and many more.

Thanks to their construction, they have a very low series resistance and a small self-inductance. Our basic design principle - preferring short winding elements with comparably large diameters - as well as the use of wavecut technology in many models, serves for high rms and surge current strength.

We are one step ahead from our competitors in manufacturing and supplying Medium Voltage Capacitor. The offered capacitors are precisely manufactured by our skilled engineers using high quality of raw material and advanced manufacturing techniques. These can be used in various industries for different purposes. Our quality auditors rigorously check these capacitors on varied parameters before the final dispatch. Additionally, these can be availed by our reputed clients in various specifications from us as per their needs.World‘s first liquid-free MV capacitor, with self-healing dielectric. And the matching reactors. And even our surge suppression capacitors are dry! This makes things different. The eco-friendly alternative No liquids Self-healing dielectric and long-term stable capacitance No phase asymmetries The traditional All Film system of conventional medium and high voltage capacitors consists of aluminium foil and polypropylene, immersed completely in synthetic, flammable oil. Breakdowns in this kind of dielectric tend to result in permanent short circuits which take out the entire capacitor element, change the voltage conditions inside the capacitor and initiate a chain reaction of further failures of capacitor elements which will end up in the loss of the entire capacitor. In three-phase capacitors, this process is usually accompanied by the occurrence of phase asymmetries which may cause damage and catastrophic failure.In our MSD™ medium voltage capacitors, we are using the metallised polypropylene so well known from LV power factor correction. Instead of flat pack windings, our capacitance is formed by compact cylindrical windings, avoiding the mechanical stress at the edges of the All Film flat packs. Dielectric breakdown insulate and regenerate by themselves, domino-like failures of series-connected capacitor elements are impossible. The capacitance remains practically unchanged throughout the operating life which is of particular interest for applications with tuning or detuning reactors. By that, phase asymmetries are impossible, and the costly star point monitoring by MV capacitor protection relais, typical for All Film capacitors, becomes obsolete.In fault situations, MSD™ capacitors do not create short circuits, hence they cannot be protected by blow-out fuses. The rising internal pressure can be reliably detected and signalled by the integrated pressure switch.Unlike All Film, MSD™ is manufactured without flammable liquid impregnates, and filled instead with eco-friendly solid, plant-oil-based resin. This offers advantages when using these capacitors in sensitive environment, in applications with high vibration stress, and during disposal at a later stage.Available as three-phase ( WYE ) units in the range from 50 to 400kvar, for mains up to 12kV, 50/60Hz. Design in accordance with IEC60871, 61071 and 60110.Features: Durability Low power consumption Shock resistance

Capacitor bank shall be enclosed in sheet steel cubical duly painted and marked with name plate details such as Sr. No. Make, Brand, Type etc.Suitable for the most arduous system condition.

We manufacture large and small size sheet metal connectors in copper, with brazed brass and copper end connections, duly tin plated. All the Press, Brazing and Plating activity is done in-house.

Alcon manufactures a large range of screw terminal aluminium electrolytic capacitors with voltage rating 50 to 500 VDC. Modern manufacturing methodology and equipment ensures good quality and a wide range of capacitance ratings from 330 to 200,000 MFD. In addition to the conventional screw terminal type, special poka yoke type screw terminals are also available. Capacitor with temperature rating -40 to +85° and -40 to +105° rating are manufactured. These have life characteristics of upto 15,000 hours. Custom designed capacitors with cost effective designs, special voltage and capacitance ratings and with higher life expectancy are also available. Capacitors have an internal design which facilitates efficient cooling. Also, specially designed capacitors with an improved heat dissipation from the base of the capacitor are also manufactured. These types of capacitors are designated as AEST-AL and can be mounted on aluminium water cooled plates or conventional heat sinks.

Ameet Sleeve for Electrolytic Capacitors are used externally for necessary insulation to the Capacitors. A variety of Ameet Sleeve from very small and narrow ones to broad ones are produced as per customers requirement. It is available in various colours. Advantages : Physical properties such as tensile strength, elongation at break, water absorption are guaranteed. Electrical properties such as insulation is guaranteed. Improvement on impact resistance is made so that the sleeved condensers are not broken when fall from heights. Range Available : Width 10mm to 150mm. Thickness 0.07 to 0.4mm Tolerances : Width+/-1mm Thickness +/-0.02mm upto 0.20mm +/-0.05mm above 0.25mm Shrink Ration : Machine Directoin - 5% - 8% & 8% - 12% (as per customers) Transverse Diection - 45% +/-5% Standard Length : 50 / 100 / 200 meters.

Guru Trade Link Capacitor are the first to introduce ZincAlloy-Metalised Poly-propylene Capacitors in Northen India. ZincAlloy-Metalised Poly-Propylene Capacitors are produced on Automatic Winding Machines at our ultra modern & Sophisticated Factory.

Product Description Wire wound potentiometers are one of the very important and needed equipments for a wide range of laboratory works related to measurement of the potential differences and voltage flow across various kinds of appliances and instruments. These wire wound potentiometers which we are offering to our clients have exclusively been designed and manufactured in a very appropriate manner with wires wound over it which make it more efficient and reliable for use. These wire wound potentiometers are available for our clients at a very conventional range of prices.   Features:   Conventional prices Superb construction Reliable and efficient Easy installation Types Available :- Wire Wound Potentiometer Digital Potentiometer Rotary Potentiometer Linear Potentiometers Motorized Potentiometer Multiturn Potentiometer Carbon Potentiometer Precision potentiometer Potentiometer Switches Trimpots

Three Phase Pole-Mounted Meter, Single Phase Pole-Mounted Mete

Application :    Individual PF Correction Dynamic PFC Individual PF Correction on three Phase Motor Individual PF Correction on Power Transformers Individual PF Correction on group Power Factor correction

SF6 Gas filled Standard Capacitor : 100 pF Power Electronical Manufactured SF6 Gas Filled Standard Capacitor . This calibrator is capable of calibrating capacitance up to 100 pF and Tan delta is up to 1 % and applied voltage is 10 kV. Measurement capability of this calibrator is 0.05 % for Tan delta and 0.17 pF of capacitance. SF6 Gas filledStandard Capacitor : 1000 pF Power Electronical Manufactured SF6 Gas Filled Standard Capacitor . This calibrator is capable of calibrating capacitance up to 1000 pF and Tan delta is up to 10 % and applied voltage is 5 kV. Measurement capability of this calibrator is 0.05 % for Tan delta and 2.7 pF of capacitance.

We are a renowned Supplier of Electrical Chokes from Nashik. The Electrical Chokes provided by us are known for their longer functional life, reliability, excellent performance and corrosion resistance. Our range of Electrical Chokes is widely used in various industries in harmonic filters. Electrical Chokes provided by us is designed keeping in mind the requirements of the market.

We are a reputed Standard Capacitor Manufacturer, Supplier and Exporter from India. These Standard Capacitors are made using the latest technology in our advanced manufacturing unit. Standard Capacitor Values vary as per their specification. Besides, clients are free to Buy Standard Capacitor in bulk quantities as per the applications. Our Range Manual C & Tan – delta SystemSemi Automatic C & Tan-delta SystemAutomatic C & Tan-Delta system (pc)Automatic C & Tan-Delta System (Microprocessor)Automatic C & Tan-Delta System (Laptoo)Induction compensating unit (ICU) use with cap & Tan-Delta BridgeStandard Capacitance & Tan – Delta Calibrator BoxExternal Current Transformer (For range extension)Standard Capacitor (Dielectric medium - sf6 Gas)Oil Tan-Deka & Resistivity Test system Three Terminal One cell up to 3 kvResonating Inductor for range extension of power supply Minimum Order Quantity : 50

High Voltage Capacitor, Oil Test System, Oil Bdv Tester, Resistivity Teste

Varistors, Passive Electronic Components, Film Capacitor, Pfc Capacitor

Capacitor Bank, Precision Capacitor, Power Factor Improvement Capacitor