Test Rig Dealers

The unit consist of a 4 4-stroke diesel engine coupled to an Electrical Dynamometer. A water cooled brake drum along with spring balances is provided. For Electrical Dynamometer water rheostat is used as loading arrangement.   SPECIFICATION: 1) Diesel engine of 5 H. P. capacity, 1500 R. P. M. 4-stroke vertical, single cylinder engine. 2) Electric Dynamometer: - A D.C. generator, with loading arrangement upto 2 Kw. Four air heater of 500 Kw. 3) For Rope Brake Dynamometer – Pully with spring balance Fuel measuring arrangement :- Consisting of a fuel tank, mounted on a strong iron stand, measurement of a fuel consumption by a burette & 3 way cock. Connecting tube, a stop watch. Cooling water arrangement:- Cooling pipes, thermocouples, measuring flask to determine the discharge of cooling water & heat carried away by cooling water. Exhaust gas temperature - digital temp. indicator Air intake measurement: - Air tank reservoir of size 0.4 m. x 0.4 m.x 0.4 m. with orifice plate, differential manometer, connecting hose.   RANGE OF EXPERIMENT:- To determine the 1) B. H. P. & I. H. P. 2) Mechanical and Thermal efficiencies. 3) Air fuel ratio. 4) Specific fuel consumption. 5) Heat balance sheet. At various load conditions. SERVICE REQUIRED:- 1) Rigid foundation to absorb the vibration. 2) Water supply and piping to & from Test Rig 3) 230 V, A. C. supply with earthing connection. 4) Petrol / Diesel for Testing.

  FRANCIS TURBINE TEST RIG       JPTI’S Francis turbine 75 m.m. size to develop 1 Kw at 1250 R.P.M. with a flow of about 1000 L.P. M. at 10m. supply head, complete with rope brake arrangement,Orificemeter & pressure gauges provided to measure flow rate, and a set of dead weights etc. for conducting experiments in metric units.

The MFP filter test rig is a modular filter testing system for flat filter media and small mini-filters. This enables you to determine the pressure loss curve on the medium without a dust coating, fraction separation efficiency, or burden and fraction separation efficiency during application of the burden and the gravimetric separation efficiency within shortest times – reliably and therefore cost-effectively. The MFP 3000 operates in suction mode. This ensures a particularly uniform formation of the dust cake even at high inflow speeds. With the aid of the light scattering spectrometer Promo® 3000, clear and reliable determination of the aerosol concentration and the particle size and therefore a clear determination of the fraction separation efficiency can be ensured. In addition, use of the welas® digital 3000 or Promo® 3000 with two sensors for virtually simultaneous particle measurement offers the following advantages: Fully-automatic measurement of fraction separation efficiency

The Vortex Tube Test Rig is one of the non- conventional methods of cooling which has no moving parts. It requires only source of compressed air. Through this tube, when air is admitted at high pressure, from one end, hot sir is discharged and from the other end, cold air comes out. The test rig is designed such that all the performance can be evaluated. Customer Scope Electrical power point 230 volts, 50 HZ, 1 ph, with 16 amps MCB.Clear space of 3 m x 2 m.Compressed air supply at 5 bar & 50 CFM List of Experiments To understand the principle of working Vortex Tube To evaluate Adiabatic Efficiency of the system.To evaluate C.O.P. of the system.To find out Refrigeration Effect per kg of air supplied.

Test rig consists of a Pelton wheel water Turbine, designed for laboratory experimental purposes and to conduct test in metric units. The specifications of the turbine are as follows:- Design Speed - 1000 RPM. Output Power - 1.0 KW The turbine consists of a cast iron body with a large transparent acrylic window, a nozzle and spear arrangement, a rotor assembly of shaft, runner and a brake drum all mounted on a sturdy base frame. The pelton buckets and nozzle are made of gun metal and the spear made of brass for corrosion resistance. The input to the turbine is controlled by adjusting the spear position with a hand wheel. A rope brake arrangement with a spring balance is provided for loading the turbine. The transparent perspex sheet side casing is provided for visual observation of flow on the buckets. Water inlet pressure is measured by a pressure gauge. Water to the turbine is provided by a centrifugal monoblock pump set of 5 HP capacity. The pump operates on 440Volts, 3 Phase, 50 Hz line. Other standard accessories include a DOL starter, switch, flow control gate valve, suitable piping. Flow measuring unit consists of a venturimeter with pressure taps connected to two pressure gauges mounted on a panel board. The complete test rig is mounted on a storage tank of suitable capacity. The tank is provided with FRP lining for total rust protection  

We manufacture life test rigs that evaluate performance of the hermetic compressors under varying load conditions. Features: � In-house electrical panel and data acquisition system design with Yokogawa NI DAQ systems and LabView DAQ programs for total automation. � Multi refrigerant capabilities

We offer gear oil pump test rig. Pump: a gear oil pump of size 25mm to discharge about 30lpm 2 against a maximum working pressure of 2kgcm moto : 1hp, 1400rpm, single phase, 200220v, ac supply. Electrical panel: switch and energy meter for the measurement of power input sump tank: m.s. Powder coatingm.s. Frp linings.s unit of suitable size store sufficient water for independent circulation through the unit. Measuring tank: m.s. Powder coatingm.s.frp linings.s unit suitable size provided with standard fittings for measuring discharge of water. Others: piping system consisting of pipes, pressure relief valve, gate valve and fitting with pressure gauge. Service required: oilhigh speed diesel of about 60lts.

Our company is placed among the foremost manufacturer, exporter and supplier of the multi stage air compressor test rig. Our team of our deft experts manufacture this rig by using excellent quality components with the improvisation of contemporary techniques with set industry norms. The rig provided by us is basically used to test the air compression in multiple stages. In addition, the offered multi stage air compressor test rig is rigorously tested by our quality experts on predefined quality parameters to deliver a flawless range towards the client's end. Features: superior strength fine finish durable performance accurate measurement specification: a. Motor : 5 h.p., with torque measurement b. Compressor : 2 cylinder c. Pressure : 10 kgcm2 d. Flow measurement : orifice meter accessories: control panel consists of starter, energy meter, pressure gauge (2 nos.).

SL90 Cylinder Head Inlet Exhaust Valve Leakage Testing Machine with Parag Unit for Kirloskar Oil Engines Ltd. Cylinder Head Jacket Leakage Testing Unit for Cummins 4R 810 Cylinder Head Water Jacket & Oil Passage Testing Machine with ATEQ Unit for Kirloskar Oil Engines Ltd.

This is complete system to test the production of washer pump of an automobile. The system is based on PLC. Runs in manual & auto mode.It measures the pressure of the water delivered by the pump & current drawn at different loads on the pump.

Eloquent Spiral Test Rig The spiral Test Rig is Designed for small batch feasibility test either closed or open circuit ) on site or in on site or in a Laboratory environment. The unit is supplied complete with a 375 liter sump, steel framework, motor, motor starter, 1" x 1.5" centrifugal rubber-lined pump, feed distributor with 4- way splitter, open grid platform, product manual sampler, internal piping and bypass valves, wheel-mounted assembly. Feed flow variation is achieved with a slurry distributor. The operating range of the slurry percent solids is from 24% to 40%. The spiral maximum feed flow rate is 135 LPM (Minerals)). The maximum capacity of the single start spirals range from 1 to 3 TPH. Construction up to 7 – turn profile.

The A.C. test rig works on simple vapour compression refrigeration cycle using R-134a as a refrigerant. The system is fabricated such that student can study all the air conditioning processes. It is also useful to understand working of all the components of system, their performance and control etc. All the components are mounted on the display board, so that students can observe their working easily.   LIST OF EXPERIMENTS: • To evaluate the tonnage capacity of the air conditioning system by enthalpy difference method. • To evaluate actual and theoretical C.O.P. of the system. • To plot the refrigeration cycle on P-H & T-S charts. • To plot the psychometric processes on psychometric charts.

Axle test rig is for the performance and quality assurance testing for front axle on the production line. It involves a development of testing system of axle for different online tests. Specifications  Multispeed Transmission test rig is for the performance and quality assurance testing for Transmission on the production line.  It involves a development of testing system of transmission for different online test RPM ratio test, Direction Test, Vibration Test and Run in Test.  Drive motor is mounted on X, Y and Z direction adjustable system.  The system is with Oil dispenser system and inline torque measurement system.

A Pressure gauge and Vacuum Gauge for head measurement. Rope brake arrangement by two circular balance methods. 300mm dia. cast iron water-cooled brake drum mounted on the main shall with bearings for load test. The head of the turbine is 5 to 8 meters and discharge about 1500 LPM. 1HP/5 HP pump set suitable for supplying water to the above turbine and for operation on 400 Volts 3 phase 50 cycles AC mains. TPIC Switch and DOL, starter for the Pump set. Flow measuring unit, consisting of 150mm Orifice meter and pressure gauge. Piping system consisting of pipes, valves, and fittings complete set suitable for the test rig. Fiber glass lined MS. Powder coated Sump tank to store sufficient water for independent circulation through the unit for experimentation and arranged within the floor space of the main unit. M. S. powder coated framework compactly lilted with all the above items as a self-sufficient package unit suitable for operation without any foundation.