Pressure Controllers Dealers

he ATEX approved Series AT2DH3 Digihelic® Differential Pressure Controller is a 3 in 1 instrument possessing a digital display gage, control relay switches, and a transmitter with current output. Combining these three features allows the reduction of several instruments with one product, saving inventory, installation time and money. The ATEX approved Digihelic® controller is the ideal instrument for hazardous area pressure, velocity and flow applications by allowing for the selection of pressure, velocity or volumetric flow operation in several commonly used engineering units. Two SPDT control relays with adjustable dead bands are provided along with a scalable 4 to 20 mA process output. In velocity or flow modes, a square root output is provided on the 4 to 20 mA signal to coincide with the actual flow curve. Flame-proof ATEX enclosures are available in aluminum and can include a glass window for viewing process information and set point status on digital display. Important notes for installation : Cables must be fitted through 12" NPT cable gland or ATEX conduit (not supplied with instrument),Open cover only after de-energizing instrument Etc.

Pressure Indicator : Accepts 4-20mA from pressure transmitter & displays pressure. Pressure Controller : Accepts 4-20mA from pressure transmitter, displays pressure and gives a relay o/p.   Specifications   4 3-1/2" Digit LED Display 4 I/P 4-20 mA 4 Works on 230V AC Mains 4 Generates 24V DC supply 4 Displays pressure upto 1000 bar 4 Single relay or Double relay o/p (Controller Only)  

The product can substitute the parts in automatic water pump with complex structure controlled by traditional machinery switch (Such as pressure gauge, pressure switch, T - valve, check valve and pressure tank). It is featured with steady performance, low maintenance cost, long service life and convenient installation. When the green “Power on” power supply indicator light flashes, it means the power supply is connected. When the yellow “Pump on” light flashes, it means the water pump has been started. When the water pump continuously runs, the pressure in pipeline system will rise and when the required pressure of the equipment is reached for several seconds, the water pump stops working. In case this process can not make the pressure in pipeline reach the required pressure of the equipment, the red light “Failure” will flash. Under this situation, press “Restart” button and keep it, and wait for the pressure in pipeline reaching the required pressure of the equipment, then the red light will be off. Release the button and close the water tap. The product stays in normal standby state and keeps the pipeline system in water supply state with a constant pressure.

PRC has designed & developed a complete solution for heavy presses (Pneumatic) manufacturers & users for their pressure controlling problems. It is very challenging to maintain predetermined pressure in the presses to produce a good quality product. Many times product is rejected due to increase or decrease in pressure which costs to manufacturer very high.   Independent electronic module for die cushion & counter balance Due to manually controlled pressure by regulator of cushion & counter balance the following drawbacks has removed by using above automatic pressure controlling system. Cushion Production Was Less (Due To High Pressure Setting Time). Production Rejection Was High (Due To Not Exact Setting Of Pressure As Components Were Required. Hard In Machining. (High Cushion Impact On Slide, Due To High Cushion Pressure) Not Proper Shape of Component. (Due To Less Cushion Pressure) Counter balance Motor Taking High Current When Balance Pressure of Counter Is High. Motor Taking High Current When Balance Pressure of Counter Is Low. Slide Coming Down May Cause Of Accident, Due To Not Proper Counter Balance Pressure As Per Slide And Die Weight. Automatic pressure controller Easy To Set Pressure for both Cushion and Counter Balance. Set Both Pressure as Per Component’s Requirement Onceand Forget It. High Production and No Rejection. Less Power Consumption. Improve Product Quality And Do Safe Production. Features: Designed to suit the Indian environmental conditions Inexpensive in comparison to other solutions Precision & accurate pressure setting Wide application range Reliable & dependable User friendly with standard warranty Customized solutions available Standard Specifications:   Application – Suitable for presses (Die Cushion & Counter Balance) Machine controller – HMI touch screen Screen size – 4.3” ADC – 24 bit Power supply – 220 V AC, 50 Hz (± 10%) Front panel – Touch screen, ON & OFF push button On screen display – Real time clock with date provided Settable parameters – High & low limits for die cushion & counter balance separately Protection – Password protection Data storage – Through built in memory Data transfer – Through USB device Rear panel – Phoenix connectors provided to connect input source Measurement – Measuring pressure in Bar Analog Input – Two Analog inputs for Strain Gauge type Pressure Transducer. Digital Inputs – 8 Digital Inputs. Outputs – 8 Relay outputs for Machine operation. Function mode – Auto & Manual. Calibration – Simple calibration procedure for Pressure Transducer. Keypad – Menu driven on screen data feeding Controller – Two independent controllers for Cushion & Counter Balance.

We are offering electronic pressure controller. * netel gas chromatograph model chrom lite gc-3000a with single flame lonization detector, with one packed or one splitsplit-less injection port. * electronic pressure controller (epc) provides excellent performance with capillary columns. *3 independent heated zones up to 400 c for individual control of injector, detector and oven. *higher sensitivity flame ionization detector requires no make up gas due to unique zero dead volume design. *32 keys for setting of the parameters & eight status l.e.d. Indications including oven ramp status. * pc control communication with rs. 232.

For requesting literature or any other information about Digital Temperature, Pressure Indicators / Controllers, please use our Enquiry Form. We will send the necessary information in a very short time.

4 Digit 7 Segment LED -1 to 1000 Bar in different ranges ±0.25% of FS Accuracy Selectable any two scales (Bar, Psi, Kgcm2 etc.) 14" NTP male for pressure connection 230V AC 50Hz Supply One set point with relay output Zero adjustment provided Size: 96x96x110 mm

Marsh Bellofram Type 3510 single and Type 3520 double loop electro-pneumatic servo pressure controllers combine the advantages of reliable solenoid valves and digital control, housed in a rugged, weatherproof enclosure. Available with a local keypad programming option or RS-485 digital communications for PLC or PC control, these precision controllers allow the user the ability to set and extract data directly from the transducer with a PC or automation system, making for some of the most precise, accurate, and reliable devices available on the market. With a forward flow of 1.25 SCFM at 100 psi, Types 3510 and 3520 can be used alone for many applications or combined with a volume booster for flows in excess of 2,000 SCFM. Various pressure output ranges are available from 29″ Hg vacuum to 600 psig. Standard accuracy is ±0.5% full scale or better. Enhanced accuracy version is ±0.25% full scale or better. A four-digit display of the output pressure is available with the keypad model.

The Pressure Controllers, we make available, are used in oil, sugar and chemical industries. We procure the Pressure Controllers from well-known sources that resort good production practices. We are capable of handling medium as well as bulk orders of buyers as we have maintained a huge stock of Pressure Controllers in our spacious warehouse. Besides, we quote nominal prices. From Maharashtra (India), we are the renowned Exporter and Supplier of Pressure Controller.     Features : Controller can be changed from Direct to Reverse action or vice-versa by simple repositioning nozzle block and reversing Bellow connections. Universal case-mounting provide with the controller helps the mounting to be done on valve panel or on the yoke of a Control Valve. The case is weather-poof and even suitable for field installations. Applications : Oil, Chemical and Sugar Industry.

We have available following Ships spareparts for Sale: Product-Pressure Controller Product-Nakakita Seisakusho Type-NS-PS-732 Sr no-32K410 Date-23-3-82 If any requirement then please contact us on +91 97279 70078. 

Aerosense differential pressure controller it is recommended that industrialists dealing in the domain of pressure control & temperature drift should make the selection of the all new range of aerosense differential pressure controller. The device is a type of differential pressure indicator that comes with advanced & standard accessory items. It is also enabled with the zero point adjustment facility and high point adjustment (span) that is provided to deliver the excellent results as per the desired levels of quality in hvac, fan & blower industries. Features: better accuracy highest pressure range protection standard conformance

Features Part of Beamex Integrated Calibration Solution or a stand-alone pressure controller Automatic pressure calibrations Portable or bench mounted Output range: from vacuum to 70 bar (1015 psi) Precision: < 0.015 % FS 1 year uncertainty: < 0.025 % FS Supported user interface languages: English, German, French, Spanish, Italian, Chinese, Russian, Japanese, Polish, Portugese, Korean

Application:   Designed for automatic supply of water to one or more outletsFeatures and Benefits:   Pressure control for constant water pressure and dry running incase of no water in the pipe line. This controls pump operation, automatically and without interruption, with constant pressure and delivery during supply from one or more distribution points. If there is no water at the suction point it blocks the pump, without using level probes or float switches   Pressure control for constant water pressure and dry running incase of no water in the pipe line. This controls pump operation, automatically and without interruption, with constant pressure and delivery during supply from one or more distribution points. If there is no water at the suction point it blocks the pump, without using level probes or float switches

The ALANG Hub service maintenance department is augmented by our large inventory of marine spare parts.   ALANG Hub has a large client network across the world including India, U.S.A., Europe, Middle East, South East, UK, Saudi Arabia, Australia, Norway, Canada, Malaysia, Ukraine, South Africa, South America, UAE, New Zealand, Thailand, New York, Turkey, Russia, Singapore & Latin America. We are having satisfied client base from ship management companies, ship owners, ship repairs, ship suppliers & traders.

Product Details: Valve mounted, Compact and simple pressure control system Output air pressure upto 3 Kg/Cm2 hence valve positioner not required Can be used directly for pressure reduction or as overflow system. No additional instruments required Totally mechanical, very easy to maintain in-house No electronics, hence not affected by ambient temperature All materials includes sensing bellow are cast AL and SS hence corrosion resistant Can be used with any control valves with any Pneumatic Actuator Very little air consumption