Electronic Test Instruments Dealers in Tri Nagar, Delhi

We have bts 4 channel dc energy meter from spaceage :- (a) general specifications : (1) parameters: current, voltage and energy for each channel of 4 channels. (2) accuracy: 1% of the range for voltage (voltage range is 20v to 70v dc). 1% of the range for current (current range is 0 to 99.9a dc). 1% of the range for cumulative energy. (3) resolution: 2 place decimal for voltage and 1 for current. 2 place decimal for energy. (4) no. Of digits: 3 digits for current and voltage. (5) input supply: 20v to 70v dc, polarity independent. (6) size: 96mm (w) x 96mm (h) x 65mm (d). (7) operating principle: micro-controller based. Real time clock incorporated. (8) operating temperature: 0°c to 55°c. (b) range of operation : (1) voltage dc: 20v to 70v. (2) current dc: 0a to 99.9a. (c) inputs (4 independent channels) : (1) dc voltage: 20v to 70v. (2) dc current: the four channels dc current (0 to 99.9 a) provided to sense the current. (d) display : information displayed using lcd with back light 2 information displayed by automatic scrolling or manual scrolling. (e) communication : the dc em communicates with other devices on a 2-wire optically isolated rs-485 link and uses the modbus rtu slave protocol. (f) mounting : wall mounted, mounting fixture provided. Optionally rack mounting can also be provided. (g) sensor options : (1) shunt based – requires wires to be cut and thimbles to be crimped. (2) hall effect based – cable can be threaded through these sensors. Sensors mounted on pcbmounting plate and powered internally from the meter. (3) split core hall effect sensors – these sensors can be clamped upon the cables and hence no disruption in working of site. Sensors mounted on pcbmounting plate and powered internally from the meter. (4) sensor mounting – wall mounting. (h) data storage and display capability : (1) daily day energy consumption of last four months is stored on memory. (2) monthly consumption data for last 12 months. (3) information can be accessed on the lcd display locally. (4) user can directly view results of a specific month instead of scrolling thru sequentially all the data. (i) password protections : (1) first password for entering into config mode. (2) config. Password can be modified in the field. (3) second password to reset config mode password, if user has forgotten the same. (4) third password to reset memory data. (j) settings under config mode -- allows following settings to be changed in a user friendly manner : (1) slave id (2) date, protection against invalid date (3) time, protection against invalid time (4) history view (5) memory reset (6) password reset

The Acm-MP-521 series is advanced microprocessor based multi parameter tester which can test pH, mV, Conductivity, Resistivity and temperature . This multi parameter pH/.conductivity meter is ideal for analytical usages in testing and research , laboratories and production plants. This microprocessor based table is ideally suited for application where multiple parameters have to be gauged with high level of accuracy and data logging for future references and report generation. These type of meters are very well equipped to be used in laboratories as well as for field application. Analytical benchtop pH meter cum conductivity meter RS 232 C Interface Data Storage of up to 600 samples Supplied with Software for data logging and analysis Equips three-in-one pH electrode, fast response and easy to use Automatic Temperature Compensation Range (-10-100o C) Self-Diagnostic with Message Codes Display

High Current Resistance Meter delivers high performance where it counts. With unmatched speed, range and accuracy it is the best solution for low resistance measurements on transformers, motors, breakers, switchgear, etc. Virtually all sizes of transformer can be measured – from small pole top units to the largest transmission units with Y or D configuration. High precision – typical 0.5%. Compact and rugged for field or factory use. Fully automatic operation.

Koizuimi Placom Digital Planimeter KP-21C Intelligent Planimeter KP-21C The KP-21C is a new era of planimeter technology. Revolutionary and Enhanced Functions. PLOT-key tracking device with easy One-Touch action. Advanced features for exceptional cost performance to meet all of your present and future needs. [vc_tabs interval="0" width="11" el_position="first last"] [vc_tab title="Description" tab_id="description"] You can measure 2D

Digital Moisture Meter, Wireless Weather Station, Windsock, Air Sampler

Energy Management System, Energy Audit, Electrical Safety Audi

Frequency Meter, AMP Meter, Panel Board Accessories, Rotary Switche

The BD 1180A IR Forehead thermometer helps in instant measurement. It comes with an LCD backlight and 8 memories. You also have theoption of choosing Celsius or Fahrenheit mode to take the temperature. It has a low power consumption and automatically shuts off. The softtouch material assists in easy grip. And with the pouch that comes with it, you can safely store and keep the thermometer.

Digital Milliohm Meter, Testing Instrument, Digital AC Millivolt Mete