Testing Equipment Dealers in Shahdara, Delhi

Automatic Calibration: WPH meter is capable of calibrating up to 2 points using USA or NIST pH standard buffer. Press CAL key to enter calibration mode and immerse pH electrode into indicated calibration solution, press ENTER key and meter is automatically calibrated. Auto-Buffer Recognition: During Calibration, If The Calibration Solution Does Not Match The Meter's Indicated Value, An ERROR Message Is Displayed. View Electrode Slope: After Calibration, The Percentage Slope Of The Electrode Is Displayed Before The Meter Returns To Measurement Mode. Per The Slope Value, You Decides Whether To Change The Ph Electrode. Automatic Temperature Compensation: Using The Supplied Temperature Probe, The Temperature Value Is Displayed On The Screen. The Meter Provides Manual Or Automatic Temperature Compensation Mode For Optimum Accuracy Under Variable Temperature Conditions. Fluid Resistant Housing And Swivel Electrode Holder: The integrated plastic housing and keypad is sealed to protect against accidental spills and splashes. The electrode holder arm is rapidly switched to both sides and swivels and articulates for convenient use and positioning.

We offer world class pH Meter that can measure acidic or basic nature of any chemical. The other information pertaining to our Digital pH Meter is given below : Main Components of Table Model : Deluxe ph meterAuto temp. CompensationCombination ph electrodeRtd probe3 -1/2 digit led display Main Components of Micro Processor based model : Microprocessor based phftemp.lmv meterAuto temp. Compunsation16x2 alphanumeric LCD display 7 digitAuto-buffer re-cognisationElectrode standBuffer solutionDust coverInstruction manual

  FEATURES :1. Fully computerised system for indentation measurement and display. 2. Accurate measurement of Brinell Hardness through matched Optics, CCD Camera, hardware and software using advanced image processing technology. 3. Wide range of testing with 4 load steps 4. High accuracy confirming to IS 2281/ 2005 5. Hydraulically loading / unloading system provided with load / unload knob for operation. 6 Windows based software system. 7. Two modes of measurement, Manual and Auto. 8. In auto mode the image is scanned for measurement and hardness is displayed       automatically. 9. Verification facility provided for a clear indication of measured impression by encircling the      same. 10. Windowing facility provided for measurement of bad images due to poor surface finish and      other reasons. 11.Macro and Micro adjustment facility provided in manual mode for fast and accurate      encirculing of the image to be measured. 12. Calibration mode is provided with password protection. 13. Batch testing facility is provided. Description B-3000 PC Computerized Brinell Hardness tester has a C type load frame, The Job is positioned on the test table and lifted by the hand wheel to touch the support plate. Required load is applied on the job and removed by operating Load / IUnload knob provided on machine at the bottom side of load frame. The timely indexing of indentor is automatic. On removal of load the optics will transfer the image of indentation to CCD. The image is further digitalized and processed by PC for measurement. The diameter of the image can be measured automatically / manually to give Brinell hardness value.The test report consists of Machine, Sample and test details along with • Mean diameter • Brinell hardness value • Bitmap image • Low / High limits of acceptance and accept or reject status. Technical Specification • Test Loads 500,750,1000, & 3000 kgf • Max. test height 360 mm (approx) • Depth of throat 200 mm • Size of base 390 x 910mm (approx) • Machine height 1230 mm (approx) • Drive motor 0.33 HP • Power supply 3 Phase 400-440 V, 50 Hz AC. (for Machine)   & 1 Phase 200-220 V, 50 Hz AC. (for Computer) • Weight of the Machine 230 Kg (approx) • Indentors 5 mm and 10 mm dia Standard Accessories • Testing table dia 200 mm - 1 No • Testing table dia 70 mm with V groove for round jobs 10 mm to 80 mm dia - 1 No • Ball holder 5 mm - 1 No. • Ball holder 10 mm - 1 No. • Test Block HB 5/750 - 1 No • Test Block HB 10/3000 - 1 No • Steel balls 5 mnnd 10 mm dia - 5 Nos each • Allen Spanner - 1 et • Instruction manual - 1 Book • Printer (Extra Accessories)

Surge Comparison Tester, Resistance Heating Epoxy Coating Machin

We are a well-known Manufacturer and Supplier of Diesel Injector Pop Tester. The reason for building a Diesel Injector Pop Tester is to see what pressure your injectors spray while they should match to each other within 3 bars. Also, Diesel Injector Pop Tester is used to see their spray pattern (the spray should be well atomized and narrow) as well as to see if they leak. We offer stringently quality tested Diesel Injector Pop Tester that is efficient, portable and light in weight. Moreover, we offer Diesel Injector Pop Tester as per customer’s required specifications at competitive prices.

Power Factor Meter, Electrical Measuring Instruments, Digital Earth Teste

Laser Power Meter, Laser Pointer, Laser Measuring Equipmen

We Offer a Large Assortment of Excellent Quality Magnetic Flow Meter that is Used to Measure the Flow Rate of the Conducting Slurries and Liquids Flowing in the Closed Pipes. Our Insertion Magnetic Flow Meter is Manufactured from the Finest Quality Raw Materials that are Sourced from the Authentic Vendors. Easy to Install, Dimensional Accuracy and Long Lasting Trouble Free Performance are the Unique Characteristics of Our Insertion Magnetic Flow Meter. We have Carved a Niche as One of the Ecstatic Digital Magnetic Flow Meter Suppliers Based in India.

Car Battery Tester, Motorcycle Battery, Traction Batterie

DC Hipot Tester, Dielectric Breakdown Voltage Teste

Thermal Stability Test Apparatus, Million Megohm Mete

Cement Testing Equipments, Core-Cone Collapsing Tester, Grain Moisture Mete

Laser Power Meter, Low Noise Laser Diode, Helium Neon Lase

Electronis Energy Meters, Main Switch Change ove

Salt Spray Tester, Barrel Wooden Polishin

Testing Equipment, Testing Machine Dealer

The Leak Testing Equipment is based on the principle of Differential Pressure Decay between two parts, a test part and a reference part with Automatic Measuring Cycle for manual and Automatic test Benches for Air to Air Leak Testing.

Energy Meters, Chalks, Current Transformer