Test Rig Dealers

The unit consist of Engine :- Petrol engine test rig consisting of a multicylinder 4- stroke 4 cylinder petrol engine, developing about 10 H.P. at 1500 R.P.M. engine. Loading device :- Electrical Dynamometer: A suitable capacity Generator With water rheostat, load bank & load measurement arrangement. The unit is accompanied with the following accessories :- ignition switch, a radiator, a self starter, a battery ammeter, a throttle control. Special arrangements by switches for cutting off ignition of each cylinder for morse test, all mounted on a suitable panel board, a battery for starting the engine, clutch arrangement. Fuel arrangement :- Fuel tank mounted on a sturdy iron stand, burette tube, 3 -way cock connecting tube, a stop watch. Cooling water arrangement :- Cooling water arrangement by cooling piping. A Measuring Jar to determine the discharge of cooling water. Special arrangement to use either radiator or external cooling water supply system. Exhaust gas temperature - Digital temp. indicator Air intake measurement: - Air intake reservoir with orifice plate & Differential manometer.   SERVICE REQUIRED:1) 230 V. A.C. supply earthing connection.2) Rigid foundation to absorb the vibration.3) Water supply and piping to & from engine, calorimeter & dynamometer to be provided by Institute.4) Petrol / Diesel for Testing.

We design the pelton wheel turbine test rig as per the set scientific principles and used to check the impulse water turbine named in honor of sir l.a. Pelton (1829- 1908) of california, usa. It is a tangential flow impulse turbine. The water strikes the buckets along the tangent of the runner. The energy available at the inlet of the turbine is only kinetic energy. The pressure at the inlet and outlet of the turbine is atmospheric. This turbine is used for high heads. the present set-up consists of a runner. The buckets are mounted on the runner. The water is fed to the turbine, through ss nozzle with a ss spear, by means of centrifugal pump, tangentially to the runner. Row of water into turbine is regulated by adjusting the spear position by the help of a given hand wheel. The runner is directly mounted on one end of a central ss shaft and other end is connected to a brake arrangement. The circular window of the turbine casing is provided with a transparent acrylic sheet for observation of flow on to the buckets. This runner assembly is supported by rigid ms structure. Load is applied to the turbine with the help of this brake dynamometer so that the efficiency of the turbine can be calculated. Pressure gauge is fitted at the inlet of the turbine to measure the total supply head to the turbine. objectives to study the operation of a pelton wheel turbineto determine the output power of pelton wheel turbineto determine the turbine efficiency utilities required water supply and drainelectricity 15 kw, 440v ac, three phasefloor area 1.5 x 0.75 m

THIS IS USED TO FIND EFFICIENCY OF CENTRIFUGAL PUMP . IT CONSISTS OF SELF CONTAINED UNIT ON CLOSED CKT BASIS 

The MFP filter test rig is a modular filter testing system for flat filter media and small mini-filters. This enables you to determine the pressure loss curve on the medium without a dust coating, fraction separation efficiency, or burden and fraction separation efficiency during application of the burden and the gravimetric separation efficiency within shortest times – reliably and therefore cost-effectively. The MFP 3000 operates in suction mode. This ensures a particularly uniform formation of the dust cake even at high inflow speeds. With the aid of the light scattering spectrometer Promo® 3000, clear and reliable determination of the aerosol concentration and the particle size and therefore a clear determination of the fraction separation efficiency can be ensured. In addition, use of the welas® digital 3000 or Promo® 3000 with two sensors for virtually simultaneous particle measurement offers the following advantages: Fully-automatic measurement of fraction separation efficiency

Diesel engine test rig digital fuel rate, air rate, temperature indicator, Rpm indicator, Manometer and burette for measurement of fuel consumption, air.

“asta technologies manufactures wide range of test rigs, spm’s & assembly line equipment’s and is a supplier to wide range of customers in india. We specialize in providing customized turnkey solutions for testing of all automotive components & assemblies. Our team is comprised of talented professionals with a wide experience in the field of manufacturing of automated testing machines. “

Product Code: EKE 2253 (A)Closed Circuit Type With S.S. Tanks, ISI Mark Pumps & Motors, Powder coatedThe closed circuit test rig consists of a "kirloskar make" monoblock centrifugal pump. The pump is provided with a vacuum gauge on suction pipe and a pressure gauge on discharge pipe. The gate valve is used to adjust the head on the pump. The discharge is measured by measuring tank / water flow meter. The input power is measured by energy meter. Specifications: Centrifugal monoblock- 1 h.p. Pressure gauge and vacuum gauge for measuring the head. Measuring tank of 400x400 x400 mm OR Water flow energy meter for measuring the discharge. Stop watch. Sump tank of sufficient capacity. Energymeter to measure input power. A technical manual accompanies the equipment. Features : The equipment is coated with an attractive and anticorrosive powder coating. The equipment consists of ISI standard­ Monoblock - Kirloskar make Energymeter - Maxwell Jaipur make Water flow meter - Kranti/Anand make. Services Required :­ 440 v, 15 A, stabilized three phase A.C. supply. Floor area-2 mx2mxl.5m height Tachometer for speed measurement (can be supplied at extra cost)  

Four poster test rig is designed to test durability of most cars. A fully self contained test rig combined with multi- channel control system and user friendly application real time effects and performs durability, performance or vibration testing in a controlled laboratory environment. • Two poster test rig is designed to test durability of most Two Wheelers. • Three poster test rig is designed to test durability of most Three Wheelers.

Single Stage, Single Cylinder air compressor with a displacement capacity of about 150 LPM and to work against maximum pressure 8KgCm2 The Unit is mounted on a storage tank. The Unit is supplied with pressure switch, suction filter safety valve, pressure gauge, water drain valve air delivery valve etc. An orifice tank with orifice plat, manometer with pressure tapings are provided to measure the volume of air sucked by the compressor. Digital temperature indicator to measure suction and delivery side temperature of the compressor. Pressure gauges to measure stage pressure. Send Enquiry

Test rig, We also manufacture the equipments and control systems for sugar industries mainly mill automation, boiler instrumentation, prd stations and embibition water control system.

In this test rig, performance of a Propeller can be investigated. The propeller is mounted on a shaft of DC motor. The load cell arrangement is used to measure the thrust force produced by the propeller.   Product Code : SAMS AE - 005

Pelton Wheel Turbine Test Rig (1 KW capacity) a) Test rig consists of a Pelton wheel water Turbine, designed for laboratory experimental purposes and to conduct test in metric units. The specifications of the turbine are as follows :- Design Speed - 1000 RPM. Output Power - 1.0 KW The turbine consists of a cast iron body with a large transparent acrylic window, a nozzle and spear arrangement, a rotor assembly of shaft, runner and a brake drum all mounted on a sturdy base frame. The pelton buckets and nozzle are made of gunmetal and the spear made of brass for corrosion resistance. The input to the turbine is controlled by adjusting the spear position with a hand wheel. A rope brake arrangement with a spring balance is provided for loading the turbine. The transparent perspex sheet side casing is provided for visual observation of flow on the buckets. Water inlet pressure is measured by a pressure gauge. b) Water to the turbine is provided by a centrifugal monoblock pump set of 5 HP capacity. The pump operates on 440Volts, 3 Phase, 50 Hz line. c) Other standard accessories include a DOL starter, switch, flow control gate valve, suitable piping. d) Flow measuring unit consists of a venturimeter with pressure taps connected to two pressure gauges mounted on a panel board. e) The complete test rig is mounted on a storage tank of suitable capacity. The tank is provided with FRP lining for total rust protection.