Test Rig Dealers

Steam turbine test rig, We also manufacture the equipments and control systems for sugar industries mainly mill automation, boiler instrumentation, prd stations and embibition water control system.

We offer hydraulic ram test rig. Hydraulic ram: hydraulic ram of size 50 x 15m to work against a delivery head up to 20m from a supply head of 2.5metres to discharge about 250lph at 10m head. Supply tank: m.s powder coatingm.s frp linings.s unit tank of suitable size with over flow arrangement for supply of water at constant head of 2.5 meters. Supply & delivery pipings: supply pipe of size 50mm & 6 meter length connecting supply tank & hydraulic ram and delivery pipe of ½ ” size to deliver useful water from hydraulic ram to measuring tank. Measuring tank: m.s powder coatingm.s. Frp lining s.s unit of suitable size provided with standard fittings for measuring of useful water. Notch tank: m.s. Unit with frp linings.s unit with a brass notch plate and hook gauge for measurement of waste water. Sump tank: m.s. Unit with frp linings.s unit of suitable size for independent circulation of water through the unit. Supply pump set: 0.5hp, single phase to supply water from the sump to the supply tank.

NIOT is using various hydraulic systems like high pressure proportional control valves and high pressure Sub-sea hydraulic pumps. These systems must be qualified and tested for its Sub-sea operating conditions. The test rig is also used for calibration and determining the pressureflow characteristics.

Product Code: EKE 2101The test rig comprises of a two-stage air compressor fitted with an air tank with orifice, pressure gauges 9 an energy meter to measure the input & a Temperature indicator measures the temperatures at various points. The compressor is mounted on air receiver along with the motor, and is provided with air relief valve (safety) and a pressure switch. The unit determines volumetric efficiency and isothermal efficiency at various discharge pressuresSpecifications:Air compressor - Double cylinder, two-stage type driven by a 2-hp. Three - phase motor mounted on air receiver provided with delivery valve.Air tank and orifice with water manometer for air intake measurement.Pressure gauges at outlet on both stages.Digital temperature indicator.Energy meter to measure input power.A technical manual accompanies the equipments.Services Required:Floor space of 2,5 X 1.5m.440 V, 15A, 3ph. AC supply with neutral and earthing connection.A hand tachometer.

Air Conditioning Test Rig works on simple vapour compression refrigeration cycle using R 134a as a refrigerant.The system is fabricated such that student can study all the air conditioning processes. It is also useful to understand working of all the components of system, their performance and control etc. All the components are mounted on the display board, so that students can observe their working easily.

This equipment comprises of a FD Fan Centrifugal Blower coupled to a DC Motor. Three interchangeable impellers with forward, backward and radial vanes are provided with the test rig. Power input to the DC Motor is varied by means of a Thyristor controlled DC Drive to vary the RPM of motor. A RPM Indicator with Proximity sensor indicates the RPM of Blower. A Pitot Tube is provided in the delivery line of blower for static and dynamic pressure measurement Experiments To study the effect of forward curved, back curved and radial curved impeller To find out the discharge, head and efficiency of the Centrifugal Blower To plot the graph Efficiency Vs Discharge To plot the graph Discharge Vs Head Utilities Required Electricity 1 kW, 440V AC, single Phase Floor Area 2.5 x 0.75 m

ESCRIPTION: The REFRIGERATION test rig works on simple vapour compression refrigeration cycle and uses R134a as a refrigerant. It is environment friendly. The system is fabricated such that students can observe and study vapour compression cycle, its component principle & working. The arrangement of parts such that, all the parts are visible and working can be easily understood.

We are offering centrifugal blower test rig the apparatus consists of a spiral casing, which houses an impeller. Impeller is driven by a variable speed d.c. Motor. Three, interchangeable impellers, viz. Radial forward and backward curved vanes are provided with the unit. Digital indicators are provided for speed of impeller. A venture provided measures the discharge. Thus students can evaluate the performance of different impellers at various speeds. specifications: 1. blower - spiral casing with three interchangeable impellers viz. Forward, backward and radial vanes. 2. drive motor-1 hp dc motor, 3000 rpm with dimmer control to vary the speed from 300 to 3000 rpm. 3. digital speed indicator for speed measurement. 4. ventura with water manometer to measure air flow. 5. water manometer to measure discharge pressure. 6. discharge pipe with flow control valve. a technical manual accompanies the unit. Services required: 1. floor space of about 2m x 1.5m x 1.5m height. 2. 230 v. 5a., 50 hz, ac supply.

This is an invaluable aid in the effective understanding of the performance characteristics of a Jet pump. The electric motor (AC or DC) is used as a drive unit. The unit has a facility to measure the power consumed by the drive, pump speed, flow rate and pressure. Optionally, it has a facility to vary the speed of the motor to get various performance parameters for better understanding.

We are one of the noteworthy Manufacturers, Suppliers and Exporters of Hydrostatic Test Rig 25T Capacity in Tamil Nadu. Hydrostatic Test Rig is used for hydro testing of valves. Hydrostatic Test Rig is an automatic PLC Control hydro testing machine. Hydrostatic Test Rig is used for valves up to 1500# class. Hydrostatic Test Rig is also used for testing of non-return valves, gate valves and globe valves of size 1-4�. Shell test, seat test and air test can also be conducted on each valve. Special Features Low cost automatic hydro test rig controlled with PLC.Automatic and manual options available.Compact size.Digital pressure transmitter and indicator used for accurate reading.Valve supporting fixture used for positioning the valve in between test flanges Technical Specifications Input Voltage : 440V AC, 3Ph, 50HzPower rating : 7.5 KWElectric motor : 5HP, 1440 RPMTank : 90 Liter Application : It is used for hydro testing of valves of class 150# to 1500# Details Size Available : Can be customizedRaw Material : Mild Steel and Alloy SteelPurchased By : Sri Ranganathar Valves Pvt. Ltd. (Valve Manufacturing Industries), Coimbatore, Tamil Nadu, India.Price : Approximately 15.0 LakhsAny other feature can be customized