Dryer / Drying Machine Dealers in Sakinaka, Mumbai

The complete assortment of raw material sourced undergoes stern examinations by the professionals to keep the quality standards high. Owing to this, we are capable of bringing forth exceptional quality products. For us making delivery of consignments is easy, as we have a productive logistic network that enables to reach buyers within the promised time. Deep Fat Dryer has a stainless steel body with a mirror finish on the surface and a long service life. 

• Very Versatile Process Equipment For Uniform And Efficient Drying Of Products. • Fully Automatic Operation Based on PLC Control / Without PLC Control • Minimum Handling And More Hygienic • Lifting & Tilting Device Of Product Container For Easy Handling • Capacity Available From 5 Kgs to 500 Kgs. • FLP Models Available As Option • MOC S.S. 304/ 316/ 316L • Option - Steam Heated Or Electric Heated Blower • CGMP Model With Documentation (IQ, DQ, PQ, OQ) - As Option.

We are offering fluid bed dryer. It is suitable for free flowing of granular powdered material. All contact parts will be made out of ss 316 quality and non-contact parts will be of ss 304 quality.

VERY VERSATILE PROCESS EQUIPMENT FOR UNIFORM AND EFFICIENT DRYING OF PRODUCTS. FULLY AUTOMATIC OPERATION BASED ON PLC CONTROL WITHOUT PLC CONTROL MINIMUM HANDLING AND MORE HYGIENIC LIFTING & TILTING DEVICE OF PRODUCT CONTAINER FOR EASY HANDLING CAPACITY AVAILABLE FROM 5 Kgs to 500 Kgs. FLP MODELS AVAILABLE AS OPTION MOC S.S. 304 316 316L OPTION - STEAM HEATED OR ELECTRIC HEATED BLOWER CGMP MODEL WITH DOCUMENTATION (IQ, DQ, PQ, OQ) - AS OPTION.

Fluid Bed Dryer that we offer is precisely manufactured and stringently tested using the latest techniques with the objective of eliminating each and every possibility of defect from it. With the support of our well-equipped production unit, we are able to produce Fluid Bed Dryer in bulk at a time. We are one of the leading Manufacturers and Suppliers of Fluid Bed Dryer.   Details : We are instrumental in providing to our valuable customers excellent quality Fluid Bed Dryers which are available with following Features : Very versatile process equipment for uniform & efficient drying of products Fully automatic operation based on plc control / without plc control. • minimum handling and more hygienic. Lifting & tilting device of product container for easy handling. Capacity available from 5 kgs to 500 kgs. Flame proof models available as option Fully automatic bag shaking Intrinsically safe earthing arrangement Stainless steel interconnecting duct lines with flanges for Connecting remote mounted heating and fan motor modules. Bucket type bottom chamber above ground level. Option - steam heated or electric heated blower.

Microwave Dryer is the best suited technology for industries related to pharmaceutical formulations. Thus people are highly preferred this technology over others. Rufouz Hitek Engineers prepare such Microwave Dryer System which can go well with your manufacturing specifications. Recently we have formulated a Dielectric Microwave Dryer in association with SAMEER- which is one the outcome of the Tata Institute of Fundamental Research. The term microwave itself refers to the frequency which lies in the electromagnetic radiation. They are the most commonly used technique that used in our day to day lives. Drying is one of the operation where a big amount of energy is needed for changing the phase. Heat in the microwave is generated through the interaction between the microwave and the part where electromagnetic energy is degenerated. Buy microwave dryer from hitekengineers with affordable price.

Mevish’s Fluid bed dryer is a process unit for preparation of granulated materials for solid dosage forms in batch and continuous batch operations. The system is applied for drying, agglomerations and top spraying upon fluidized bed. Fluid Bed Dryer manufacturers, suppliers and exporters in various capacities & batch sizes. Batch size means the weight of wet product i.e. including moisture / solvent that can be charged in the dryer at a time. In case of very granular or crystalline material the capacity may be increased by about 15 to 20%. Mevish provides several options that can be supplied with Fluid Bed Dryer if opted such as Inflatable tubes, PLC automation control, AC Variator for blower, WIP CIP system, pneumatic damper on ducts, police filter, Scrubber on discharge, steam fittings if steam heater, electrical heater, chilling coil, solid flow monitors, Top spray arrangement with holding tank and peristaltic pump, EX rated FLP construction etc.   SALIENT FEATURES : • Very Versatile Process Equipment For Uniform And Efficient Drying Of Products. • Fully Automatic Operation Based on PLC Control / Without PLC Control • Minimum Handling And More Hygienic • Lifting & Tilting Device Of Product Container For Easy Handling • Capacity Available From 5 Kgs to 500 Kgs. • FLP Models Available As Option • MOC S.S. 304/ 316/ 316L • Option - Steam Heated Or Electric Heated Blower • CGMP Model With Documentation (IQ, DQ, PQ, OQ) - As Option.

The operation of the fluid bed dryer is very simple whereby the drying of the material takes place by forced air circulation inside the chamber. The atmospheric air is drawn through the air micron filter by a specially designed blower mounted on the top of the dryer. The clean air then passes through the heating elements (electric cheater / steam / thermic fluid radiator) to reach the required temperature. The hot air then passes through the product container and the product gets dries faster by air fludization. The air circulation is controlled by means of dampers. A Filter bag provided inside the drying chamber prevents the finest of particles of the material from entering the air stream. The main chamber is provided with on explosion flap to protect against pressure buildup inside the chamber. Digital temperature controller for the inlet air and temperature indicator for the outlet air comes as a standard. Higher capacity models are provided with automatic operation like automatic bag shaker timer, pneumatic damper (butterfly valve) operation, process timer, sampling valve with bottle, etc is provided as a standard. Fully automatic operation with data logging through a PLC is provided as an option. For higher capacity models, the blower can be detached for mounting in the service area to reduce noise level and isolate maintenance from the production area. Granulation Line:- Fluid Bed Dryer Manufacturer In India with a highly versatile machine for drying of granules, crystalline & coarse powders and similar materials for the pharmaceutical, chemical, food, dyestuff and allied industries. Salient Features: All contact parts are S.S. 316 quality and the bottom chamber, blower chamber explosion chamber, supporting structure, trolley, etc are of S.S. 304 quality. Automatic pneumatic bag shaking with timers and butter fly valve (optional for lower models) Pneumatic discharge ensures quick and complete discharge of the material fro the container. Pneumatic lifting for product container (optional for lower models) Temperature controller for electrical heaters / steam radiator. Quick action butterfly valve ensures that the systems is totally contained and enclosed. Explosion flap with aluminum / calf gasket to protect from pressure building inside the chamber. Optional: PLC automation with printer for data logging. Solid particle detection system or tarn bag detections system. Pneumatic lifting for product container (optional for lower models) Differential pressure gauges to monitor pressure across inlet air filter and filter bags. Positive earthing arrangement with low voltage relay. Inflatable silicon gasket for the filter bag and the product container.

The DMH series Liquid Line Filter Driers are designed to protect the refrigerant system from liquid and solid contaminants. They incorporate a specially formulated desiccant blend of molecular sieves and activated alumina providing very high mechanical strength, outstanding filtering capability, high moisture, adsorption and acid removal. DMH series is recommended for refrigeration, freezing, air-conditioning systems and for mobile refrigeration.

Compact, stainless steel unit with casters for easy movement, floor type freeze dryer provides unmatched process accuracy and reliability in performance. It optimizes your space requirements and reduces energy consumption. Basic specification : type: standard capacity: 1.2 litres condenser temperature: -55°c (-80°c optional) water holding capacity: 3-4 kg/24hr shelves: 4

FUNCTION  Used mainly for drying of high grade, temperature and oxygen sensitive products. Highly suitable for drying hygroscopic substances, which are dried to very low residual moisture, content level. Frequently vacuum drying cabinets are the sole possibility for drying lumpy, glutinous products or products of low pomposity. CAPACITY Standard models range from 4 trays to 48 trays. SALIENT FEATURES Bodies may be of cylindrical or rectangular cross section. Both shelves and body are heated (the body to prevent internal condensation) with controlled circulation of hot water, steam or dia thermic fluid. Vacuum is drawn through large diameter ducts to minimize pressure drops and produce minimum working pressures. Both rotary and static dryers can be supplied with the following Optional ancillaries. Heater system for either pressurized hot water or dia thermic fluid. Cyclones and sleeve filters for powder recovery (for rotary dryers) Solvent recovery system with condenser and receiver, vacuum pump and ancillaries, characteristics and dimensions depending on the drying processes. Vacuum Tray dryer is the most commonly used batch dryer. They are box-shaped and loaded and unloaded via a door (two doors on the larger models). Inside are several heating plates mounted one above the other on which the product is placed in trays. The bottoms of both heating plates and trays should be as smooth as possible to permit optimal heat transfer between plates and product. The medium flowing through the heating plates is water, steam or thermal oil.     The distance between the heating plates is determined primarily by the surface loading and the foaming of the product. To void retrograde condensation the cabinet walls are indirectly preheated by the heating plates. Next, the product is introduced and heated at atmospheric pressure. Only after all individual product trays reach the same temperature the cabinet is evacuated and drying can start. The  preheating phase is very important in order that the drying curve and the foaming of the product is identical throughout the cabinet. During the main drying phase the vacuum is in the range of 40 to 80 mbar abs and in the final drying phase vacuums of only few mbar abs are reached. Heating temperatures are normally in the range between 800C and 1100C. Depending on product and surface load, drying takes from a few hours to 1 to 2 days. For some products the vacuum and temperature profiles are automatically controlled in order to prevent a pass over of the critical product temperature. factor in the design of drying cabinet systems. If for example vigorous foaming of the product is desired, evacuation to the operational vacuum level must take place very quickly. Vapors produced during drying are taken out direct, or via a steam jet compressor to a surface condenser in which the vapors condensate. The non-condensable vapors are extracted by the vacuum system. On completion of the drying, the product can be cooled by circulating of cooling water through the heating plates. Features: All contact parts are made out of SS304 / SS316 / SS316L quality material in GMP models and mild steel externals with stainless steel internals in standard model Hollow pad type heating shelves which are easily removable for maintenance Condenser and condensate receiver fixed on the dryer body or stand alone for remote installation Full welded skirt on vacuum dryer body for flush mounting through the wall. External fluid heating of dryer with protective panels in stainless steel or mild steel powder coated. Dedicated fluid heating and circulating systems. These can be steam or electrically heated. Fluid heating systems are available for water as well as thermic fluid (for temperature requirements above 95 oC) Validation ports and nitrogen purge nozzles Can be designed to customers specification requirements Steam sterilisable models available Double door loading available for large models Halar lined internals for corrosive applications

We deals in manufacturing and supplier of air impingement dryer. Special features: material from remains intact - low power demand - continuous operation

We are considered as one of the most important Fluid Bed Dryer Exporters from India. We present acme quality Fluid Bed Drying Machine that is designed using cutting edge technology. Used for dying purposes, Fluid Bed Dryer is used in various industries like pharmaceutical, dyes, food and chemical industries. Known for its efficacious performance and long life, Fluid Bed Batch Dryers are highly demanded by customers. We provide availability of Fluid Bed Dryer in unlike specifications as per customer demands. ADVANTAGES The conventional drying method for drying products in tray dryers is rather inadequate & troublesome. They also occupy large space & have very high & uneven drying times and also involved high labour input. To over come this problem RIDDHI made Fluid Bed Dryer which is the simple solution to dry the products. SUITABILITIES This compact unit is suitable for drying granular, crystalline, coarse or similar materials in Pharmaceuticals, Dryer, Fine Chemicals & Food & Allied Industries. It is also possible to dry fine crystal or coarse materials in fluid bed dryers. DESCRIPTION Latest improvement in design makes this unit truly GMP model for Pharmaceuticals industries & versatile in operation for other industries like food, dyestuff, chemicals & polymer industry. In GMP models, all the contact parts made out of S.S.304 / 316 material & are provided with isolated panel board. However with standard Fluid Bed Dryers for product containers, retarding chamber are made out of stainless steel materials S.S. 304 only & other parts from mild steel sheet. BATCH SIZE Batch size indicates weights of wet products (inclusive of moisture). Our Model RDFD-30 can take batch size of 30 to 40 Kgs. of wet material. Similarly model RDFD-120 can process 120 to 135 Kgs. of wet material per batch. The weight of materials to be loaded per batch depends upon the bulk density of wet material. OPERATION The wet material is introduced into the dryer as a batch of material in a product container which is provided with air distributor plate & clutch weave. Induced draught is created by the blower & fresh air is sucked into the unit. After filteration, clean air passes through the heating elements. This hot air then passes through the product containers, creating turbulance in the products & hence the product moves up and down known as Fluidization in the product container. Due to this process, the heat transfer is quick and the product is dried fast without appreciable loss of heat. Filter bags prevent particles escaping from the dryer. HEATING Fluid Bed Dryer can be supplied in electric heating, steam heating or hot water circulation systems or gas heating system on demand. Electrically heated dryers are provided with electrical heating elements and are suitable to raise air temperatures by about 750 C (i.e from 300 C to 750 C). Similarly steam operated dryers are provided with steam radiator suitable to raise air temperature about 600 C to 750 C depending upon pressure of steam. Generally dryers bigger than RDFD- 60 are incorporated with steam heating system as it is more economical. DRYING TIME The drying time depends upon various factors such as physical properties of material, moisture content, type of moisture (free moisture or water of crystallization), drying temperature etc. The crystalline products can be dried faster than amorphous product containing same percentage of moisture at the same temperature. Generally pharmaceutical granules or crystals containing free moisture of about 20% to 25% can be easily dried in about 30 to 40 minutes at a temperature of about 750C. Certain crystalline materials containing about 40% of moisture can be dried in Fluid Bed Dryer within 35 to 45 minutes. IMPORTANT In case the product contains solvents or inflammable substances, it is essential that the Dryer is steam operated &provided with flame proof motor. Motor The dryer will be provided with with suitable Remi/Hindustan/Sabar or standard ISI make motor of 2800 RPM FILTERATION Single stage filteration of 20 microns PP cloth filter, P.P. filter bag for exhaust air, also multi stage filteration can be given on demand. Positive Earthing Arrangement, explosion flap are given as a part of standard features. Control Panel Pre-wired control panel indicate Digital Timer, Digital Temperature Indicator cum controller(Inlet), Digital Temp. Indicator (Outlet), Sensor, Star-Delta Starter with relay, Indicating Lamps, MCBs, Amp. Meter cum Volt Meter, Selector switch etc. SPECIAL FEATURES Uniformity in drying and reduction in drying time.Atmospheric inlet air is filtered by means of single / multi stage filters of 20 microns to prevent any fine dust to pass through the product.Steam Coil made out of 1” dia. SS 304/316 finned tube & is designed to get pressure of around 3-4kg./cm^2 (working pressure 3 kg/cm^2).Digital temperature indicators cum controller is provided with the unit to indicate the inlet and outlet air temperature as well as to controller the present inlet air temperature.Air suction and discharge dampers provided to control the inlet and outlet air flow.An explosion safety flap of adequate capacity at the rear end of the dryer and an positive earthing point to prevent static charge in the machine are provided.Timer provided to set the process time which will cut off the motor supply after pre-set time period.