Testing Equipment Dealers in Karampura, Delhi

Accelerated Curing Tank-VSLIC2045   he strength of concrete is generally estimated after 28 days by crushing field test cubes or cylinders made from the representative concrete used for the structure. The utility of ascertaining strength after 28 days is often questioned since by this time considerable concrete would have been placed and work may have progressed. It is then rather too late for remedial measures. It is therefore of tremendous advantage to predict 28 days strength within a few hours of casting the concrete so that, we have a good idea about the strength of the concrete. The rate of gain of strength of concrete depends on the reaction rate of cement and additions with water (Hydration). In common with all chemical reactions, the rate of reaction depends on reaction of temp. Higher reaction temperature gives higher rate of reaction e.g. the concrete gains strength more rapidly when its temp. is higher. Accelerated curing is the process by which the temperature of the concrete is raised artificially by applying external heat to speed up the rate of gain in strength. The test method covers procedures for curing test specimens of concrete stored under conditions intended to accelerate the development of strength. The procedures are: Procedure A- Warm Water Method, Procedure B-Boiling Water Method.   General Description & Specifications Accelerated Curing Tank having capacity to accommodate 6/12/18 Concrete Cubes of 150mm size with a facility for accelerated curing by Boiling water method up to temperature range : 100 +/- 2 deg.C as per IS standard IS : 9013. Also it will have capacity for curing by warm water method at temperature 55 +/- 2 deg.C Tank will consist of a rectangular double-walled metal cabinet, inside lined with stainless steel, outer powder coated. Easily replaceable high Wattage heaters are mounted inside the chamber. A slow speed stirrer is provided to circulate water inside the chamber to maintain the uniform temperature of water. A strong stainless steel perforated platform is provided for keeping the cubes and also have a lid with lifting handle to cover the chamber. The temperature is indicated and controlled by a DIGITAL auto-tuning PID Temp. Controller with soak timer to control the duration of heating and then to shut down the system without manual attendance. The front panel will have power supply indicating lamp, control action indication lamp and one main switch. Suitable for operation on 220 V, 50 Hz single phase, AC supply or 440 V 50 Hz, three phase AC supply, for bigger size of curing tank. Optional AccessoriesRubber hand Gloves. Spare Heaters. Low water Level cut off device to safeguard heaters against low water level burn out Inbuilt refrigeration system for curing at 27 deg C Also Available Accelerated Curing Autoclave: By Steam Pressure Accelerated Curing Dryer : By Dry Heat

Koizuimi Placom Digital Planimeter KP-21C Intelligent Planimeter KP-21C The KP-21C is a new era of planimeter technology. Revolutionary and Enhanced Functions. PLOT-key tracking device with easy One-Touch action. Advanced features for exceptional cost performance to meet all of your present and future needs. [vc_tabs interval="0" width="11" el_position="first last"] [vc_tab title="Description" tab_id="description"] You can measure 2D

This is apparatus is used to determine softening point of bitumen, Ring and ball apparatus is used to determine softening point. It is that temperature at which a sample of bituminous material loaded by a 9.5mm dia.-steel ball, drops at a distance of 25mm. The apparatus consists of steel bracket with a sliding plate support. That support has two holes of 10mm dia. on which a Ring and Ball guide can be kept. A central Hole on this plate is for inserting thermometer. Supplied with a glass beaker approximate 8.5cm I.D., 12cm high and a hand stirrer and 2 nos. 9.5mm dia. steel balls.

The company is a well-known Manufacturer, Exporter and Supplier of Accelerated Curing Tanks in New Delhi. The Accelerated Curing Tanks are used for the cube molds at the numerous construction laboratory sites. The Accelerated Curing Tanks, offered by the company, are mainly available for 6 cubes or 12 cubes. The Accelerated Curing Tanks are basically rectangular tanks fitted with a heater at the bottom of the tank and are connected with a tullu pump for the circulation of water. Temperature of the Accelerated Curing Tanks is controlled by a digital temperature controller fitted at the side of the tank. Highlights Of Accelerated Curing Tanks Manufactured with good quality material Long life Highly efficient Easy to use with minimal maintenance requirements Other Laboratory Equipments Are Hot Air Oven Electronic Balance & Platform Balance Furnace & Water Bath Measuring Cylinder, Beaker, Jar BOD Incubator Stirrer & Heater Water Still & Vacuum Pump Spare Accessories Digital Planimeter Measuring instruments Metrological & Metallurgical Equipments

The CBR method is used for finding the relative bearing ratio and expansion characteristics of soil of base, sub-base and sub-grade for the design of roads, pavements and runways. It meets the requirements of BIS-2720 Part XVI and consists of Load frame. Our California Bearing Ratio Test Apparatus is designed with precision keeping in mind the needs of the clients, and are widely used for laboratories activities. The California Bearing Ratio Test Apparatus is made using high quality raw material, and is incorporated with many advantageous features. We make available California Bearing Ratio Test Apparatus with different speeds, and cater to the needs of the clients. Features Precision engineeredCustom manufacturedHigh performance rateHigh speed Available in Three speedSix speedTwelve speedThirty speed Specifications Hand operated Capacity 5000 kg.One CBR Mould 150 mm diameter and 175 mm high complete with base plate and collar 150 mm diameter and 50 mm high.One penetration Piston faces 50 mm diameter. Bracket.Displacer Block 148 mm diameter and 47.7 mm long.Surcharge Weight 5 kg and 2.5 kg with central hole and also slotted. Tripod Cutting collar.Proving ring, capacity 1000 kg.One diameterl gauge with least count .01 mm.California Bearing Ratio Apparatus Motorized Complete as above, but supplied with a motorized load frame with rates of travel of lead screw 0.025 mm/min.; 0.05 mm/min.; 0.0625 mm/min.; 0.125 mm/min.; 0.25 mm/min.; 0.5 mm/min.; 0.625 mm/min.; and 1.25 mm/min.Available in-Hand Operated, three speed, six speed, twelve speed and thirty speed.

We are offering universal grid tester, universal grid tester.

For immaculate and easy to use Dust Test Chamber, you can completely rely on us. We are reputed Manufacturer, Supplier and Exporter of Dust Test Chamber from New Delhi, India. The construction of the Dust Test Chamber is designed to avoid direct radiation of heat on the test specimen. The floor of the Dust Test Chamber ensures that the dust falls in to the hopper for recirculation. Customers can avail the Chamber at competitive rates.   ConstructionThe construction of the Chamber will be such to avoid direct radiation of heat on the test specimen. The floor of the chamber will be so designed as to permit the dust fall in to the hopper for recirculation of supporting specified load of the floor area.Exterior Chamber : Will be made of 18 swg CRC M. S. Sheet with 3 coats of paint or 18 swg Stainless Steel   Interior Chamber : Made of 18 swg Stainless Steel Heating SystemFor temperature uniformity in the chamber, low surface loading sealed tubular heaters will be provided as per IS 4159. The heaters will be fixed in conditioning space in the chamber duly baffled to avoid direct radiation.Heat Input Controlling : Through Solid State Relay proportional control for heating.Dust Agitating Mechanism Dust Agitating Mechanism will be provided with Fan with Motor of sufficient capacity without allowing to heat up unduly during constant operation of 200 hours. Pressure Vacuum will be provided in the Dust Spray Chamber. Provision of using, either fan or vacuum or both can be used at a time, will be provided. Average dust sprayed will be 25 gms ±5 gms in 5 minutes. InstrumentationSolid State Digital Temperature Controller-cum-Indicator will be provided with PT-100 Temperature Thermocouple.Control PanelSeparate Control Panel on top of the Chamber will be provided with Contactors, On/Off Switches, Fuses, and Indicating Lamps.WiringThe wiring, will be channel type with suitable current rated copper wire as per, IS Code.Safety Protection Overload Protector for motor. MCB for heaters. Safety cut off thermostat with audiovisual alarm for over shooting temperature. Back up Fuse protection for mains and individual circuit.

We make available Digital pH Meter, the mains-operated, tabletop model, all over the country and abroad at affordable prices. Our company is one of the most preferred Manufacturers, Exporters, and Suppliers of Digital pH Meter in Delhi, India. We offer the Meter with auto-temperature compensation facility and 3½ fully automated LED display. We, furthermore, are catering with our high-grade Digital pH Meter to various industries including food & beverage and laboratories. Additional Features : Auto Polarity & Decimal IndicationSlope Control Also, available in Microprocessor-based model with 2 point/3 point calibration

We are offering ultrasonic pulse velocity. Unbeatable pundit® lab features measurement performance; optimized pulse shaping, atomated transmission settings for optimum performance and a range of new, more powerful transducers ensure accurate, stable measurements. Integrated waveform display; allows analysis of the received signal and manual triggering directly on the instrument. On-line data acquisition; full remote control of all transmission parameters, data logging function and functionality that turns your pc into an oscilloscope. Usb interface and data analysis software; data analysis and export to third party programs. Open interface; control pundit lab using third party software such as lab view. new features in pundit® lab+ integrated gain stage; removes the need for an external amplifier when using exponential transducers and long cables. Compressive strength measurement; conversion curves for strength estimation can be created in the software and uploaded to the instrument to give instant strength estimations on site. 1combined estimates with rebound hammer; sonreb curves may also be uploaded onto the instrument for improved compressive strength estimates in combination with rebound hammer measurements. Time stamp; a real time clock has been integrated to provide a time stamp to every measurement recorded. Review list; saved measurements may be reviewed directly on site without the need for a pc connection. an extended range of transducers a complete range from 24 khz up to 500 khz for various applications including: • improved 54khz and 150khz transducers; a new design with improved performance to increase range and stability. • improved 54khz exponential transducers; a new design with improved performance. When used in combination with pundit lab+ no external amplifier is required. • 250khz shear wave transducers; for use in combination with standard p-wave transducers to measure the dynamic elastic modulus of the material under test.

Our mastic asphalt tester is used to determine the hardness of asphalt material. The design features direct vertical loading with loading weight that rest on thrust bearing therefore load is applied to the specimen without transmitting shock to the loading column. At the end of the loading period, the depth of penetration of the pin can be read form the dial gauge to an accuracy of 0.01 mm. The thermostatically controlled heater unit has a built in impeller, which circulates the water to maintain an even temperature throughout. ref : standard bs 5284 & is 1195

manufacturing high quality products like spirit lamp with competitive prices..

We offer complete range of analogue and digital meters in single and three phase. They range from basic ammeters, voltmeters, frequency meters, multifunction meters, energy meters etc.

We have bts 4 channel dc energy meter from spaceage :- (a) general specifications : (1) parameters: current, voltage and energy for each channel of 4 channels. (2) accuracy: 1% of the range for voltage (voltage range is 20v to 70v dc). 1% of the range for current (current range is 0 to 99.9a dc). 1% of the range for cumulative energy. (3) resolution: 2 place decimal for voltage and 1 for current. 2 place decimal for energy. (4) no. Of digits: 3 digits for current and voltage. (5) input supply: 20v to 70v dc, polarity independent. (6) size: 96mm (w) x 96mm (h) x 65mm (d). (7) operating principle: micro-controller based. Real time clock incorporated. (8) operating temperature: 0°c to 55°c. (b) range of operation : (1) voltage dc: 20v to 70v. (2) current dc: 0a to 99.9a. (c) inputs (4 independent channels) : (1) dc voltage: 20v to 70v. (2) dc current: the four channels dc current (0 to 99.9 a) provided to sense the current. (d) display : information displayed using lcd with back light 2 information displayed by automatic scrolling or manual scrolling. (e) communication : the dc em communicates with other devices on a 2-wire optically isolated rs-485 link and uses the modbus rtu slave protocol. (f) mounting : wall mounted, mounting fixture provided. Optionally rack mounting can also be provided. (g) sensor options : (1) shunt based – requires wires to be cut and thimbles to be crimped. (2) hall effect based – cable can be threaded through these sensors. Sensors mounted on pcbmounting plate and powered internally from the meter. (3) split core hall effect sensors – these sensors can be clamped upon the cables and hence no disruption in working of site. Sensors mounted on pcbmounting plate and powered internally from the meter. (4) sensor mounting – wall mounting. (h) data storage and display capability : (1) daily day energy consumption of last four months is stored on memory. (2) monthly consumption data for last 12 months. (3) information can be accessed on the lcd display locally. (4) user can directly view results of a specific month instead of scrolling thru sequentially all the data. (i) password protections : (1) first password for entering into config mode. (2) config. Password can be modified in the field. (3) second password to reset config mode password, if user has forgotten the same. (4) third password to reset memory data. (j) settings under config mode -- allows following settings to be changed in a user friendly manner : (1) slave id (2) date, protection against invalid date (3) time, protection against invalid time (4) history view (5) memory reset (6) password reset

We are counted among the proficient Manufacturers, Suppliers and Exporters of Digital PH Meter (101 & Ill). The pH Meters we make available are manufactured using advanced technology. Buyers are free to place bulk orders of the meters with us and we ensure their timely delivery within the promised timeframe. Buyers can obtain these at reasonable rates from us.

Accelerated Curing Tank, Mortar Cube Vibrating Machine, Cube Moul