Test Rig Dealers

Pelton turbine test rig of blower casing fitted to a variable speed motor. Three different type of impellers can be fitted over the shaft. Air discharge is measured by venturimeter. The impeller can be rotated at different speed and performance of blower can be estimated at different speed and discharge heads.

The company is one of the credible Manufacturers, Suppliers and Exporters of Hydrostatic Test Rig 250T Capacity. Hydrostatic Test Rig is an automatic PLC control vertical type valve testing unit which is used to test the plug valves. Digital pressure transmitter and indicator in Hydrostatic Test Rig are utilized for accurate reading. Hydrostatic Test Rig also has automatic pressure control for testing pressure. Hydraulic pressure in Hydrostatic Test Rig can be controlled automatically according to valve class. Special Features A vertical type valve testing unitAdjustable daylight facilityDigital pressure indicator for testing pressureAutomatic PLC control panel. Technical Specifications Size : 6� to 24�Valve class : 300#Capacity : 250TonPower pack : 10HP Application : It is used for hydro testing of plug valves of size 6-24� � 300#. Details Size Available : Can be customizedRaw Material Used : Mild Steel and Alloy SteelPurchased By : Xomox Sanmar Limited (Valve Manufacturing Industries), Viralimalai, Trichy, Tamil Nadu, India..

The setup is designed to study the performance of centrifugal pump. Set up consists of a centrifugal pump coupled with electrical motor, supply tank, measuring tank & pipe fittings for closed loop water circulation. Pressure and Vacuum gauges are connected on delivery and suction side of pump for the purpose of measurement. The flow rate of water is measured using measuring tank and stop watch provided Experiments To determine overall efficiency and pump efficiency of the centrifugal pump. To plot Head vs. Discharge, Pump efficiency vs. Discharge Utilities Required Electric supply Provide 230 +/- 10 VAC, 50 Hz, single phase electric supply with proper earthing. (Neutral – Earth voltage less than 5 VAC.), 5A, three pin socket with switch for pump. Water supply Tap water connection BSP Distilled water @ 180 liters (optional)

Test rig consists of a battery of 12.5mm pipes of stainless steel, aluminium and copper of length over 100 times the diameter with pressure tappings at either ends to measure the losses due to pipe friction - major losses. To measure the minor losses, a 15mm(1/2") GI pipe is fitted with a bend, an elbow, a sudden enlargement and a sudden contraction. Suitable flow control valves are provided in all the pipe lines. Each test pipe and pipe fitting is provided with pressure tappings to measure the pressure loss. A differential manometer (without mercury) is provided to measure this pressure loss. The pressure tappings are connected separately to a manifold which in turn is connected to the manometer for easy change over. A strong iron stand is provided for supporting the pipe lines. A stop watch and an M.S. collecting tank of size 90 liters. with a gauge glass scale fitting, a drain valve and a bend are provided to measure the actual flow rate. A 220 volt AC, 0.5 HP, single phase monoblock ISI pumpset with suitable pipe fittings, strainer foot valve, and switch is provided to supply water to the test rig. A sump tank of size 200 liters with suitable drain is provided to store the water. A strong iron stand fitted with wheels supports the complete test rig. The unit is moveable. All tanks are provided with FRP lining for total rust protection  

HYDRAULIC RAM TEST SETUP DESCRIPTION:- The Set-up is designed to study the Hydraulic Ram. Hydraulic RAM is used for pump little quantity of water to high head from a large quantity of water available at low head. It works on a principle of water hammer stating that “When flowing water is suddenly stopped in a long pipe a pressure wave travels along the pipe creating an effect of water hammer”. The Set-up consists of a pipe section fitted with a pulse valve and non-return valve, a supply reservoir on a stand which is connected to an overhead tank, an air vessel above the valve chamber smoothes cyclic fluctuations from the Ram delivery. Different pressure may be applied to the pulse valve to change the closing pressure and hence the operating characteristic. The flow rate of useful and waste water is measured using measuring tank and stop watch provided. Pressure and Vacuum Gauge are connected on delivery and suction side for the purpose of measurement. EXPERIMENT:- Ø To find out discharge of useful water and waste water. Ø To find out the efficiency of the Hydraulic RAM FEATURES:- Ø Closed loop water circulation Ø Compact & stand alone set-up Ø MS Excel sample calculation program on demand Ø Stainless Steel tanks and wetted parts Ø Superb painted structure Ø Simple to Operate & Maintain UTILITIES REQUIRED:- Electric Supply: - Provide 230 +- 10 VAC, 50 Hz, Single Phase Electric Supply with proper earthing. (Neutral – Earth voltage less than 5 VAC) 5 A, three pin socket with switch for pump. Water Supply: Tap water connection ½ “ BSP Distilled water @ 90 Ltrs. (Optional) TECHNICAL SPECIFICATIONS: - Ø Product : Hydraulic RAM Ø RAM : Size 50 x 15 mm, Supply Head 2.5m, Delivery Head 10 m (max.)

Product Code: EKE 2253 (A)Closed Circuit Type With S.S. Tanks, ISI Mark Pumps & Motors, Powder coatedThe closed circuit test rig consists of a "kirloskar make" monoblock centrifugal pump. The pump is provided with a vacuum gauge on suction pipe and a pressure gauge on discharge pipe. The gate valve is used to adjust the head on the pump. The discharge is measured by measuring tank / water flow meter. The input power is measured by energy meter. Specifications: Centrifugal monoblock- 1 h.p. Pressure gauge and vacuum gauge for measuring the head. Measuring tank of 400x400 x400 mm OR Water flow energy meter for measuring the discharge. Stop watch. Sump tank of sufficient capacity. Energymeter to measure input power. A technical manual accompanies the equipment. Features : The equipment is coated with an attractive and anticorrosive powder coating. The equipment consists of ISI standard­ Monoblock - Kirloskar make Energymeter - Maxwell Jaipur make Water flow meter - Kranti/Anand make. Services Required :­ 440 v, 15 A, stabilized three phase A.C. supply. Floor area-2 mx2mxl.5m height Tachometer for speed measurement (can be supplied at extra cost)  

Pelton Turbine Test Rig is a systemized arrangement of a small Pelton wheel connected to a rope brake. In fact, the entire arrangement in Pelton Turbine Test Rig is done with the help of spring balances. We are into manufacturing, exporting and supplying Pelton Turbine Test Rig at the most genuine prices.

This is an invaluable aid in the effective understanding of the performance characteristics of a centrifugal air compressor. The compressor is run using an AC motor. The system has indicators for pressure, temperature and airflow rate. Optionally, it has a facility to vary the speed of the motor to get various performance parameters for better understanding.

IC engines are widely used in automobile, domestic and industrial sector. They are classified according to cycle, number of cylinders, arrangement of cylinders, fuel used, type of ignition, valve arrangement, cooling system. Test rigs are used to find out the performance of an IC engine. It consists of an IC Engine, dynamometer, fuel measuring, air intake measuring and various other arrangements.

Triotech have developed tractor transmission test rig for 70 HP capacity. Also designed & manufactured drive line modules required for these test rigs.

Code: EEZ0007 Electrolux Refrigerator Test Rig. Electrolux Refrigerator Test Rig ManufacturerElectrolux Refrigerator Test RigDescriptionThe set up demonstrates the students about the basic principal of a vapour absorption refrigeration cycle. The test rig is designed for the study of thermodynamics of vapour absorption refrigeration cycle by measuring temperature at different position.Experimentation:    To Calculate Co-efficient of performance.Utilities Required :    Electric Supply : Single Phase, 220 V AC, 50 Hz, 5-15 Amp. combined socket with earth connection.    Bench Area : 1.5 m x 1mTechnical Details :Sealed Circuit     The System has no moving parts at all, which makes it Silent and very durable.Refrigerant       Mixture of three fluid system Ammonia(NH3) + Water (H2O) +  hydrogen (H2)Gases         Non–CEC, Non –HCFC, Non–FCKW, Non –FreonMode of System       Externally heated by electric resistanceEvaporator        Coil Type evaporator with facility to determine performance efficiency ratio (PER)Volume of Cabinet      41 Ltrs., Voltage Input –65 Watts, Electrical Consumption/24 Hrs. –0.8 kWh, Auto Defrost Fuzzy Logic System, VoltageTemperature Sensor      RTD PT-100 Type.Digital Voltmeter        0-300 VDigital Ammeter       0-5 Amp.Temperature Measurement      Digital Temperature Indicator with multi-channel switch.Instruction Manual         An ENGLISH instruction manual will be provided along with the Apparatus